used HEYLIGENSTAEDT Facing Lathes

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Facing lathe make HEYLIGENSTAEDT type 405 EVMachine -No: 581242229/189623 Year of construction 1965 with sliding upper bedTop width: 1750 mmTop height from the underbed: 405 mmTurning diameter over bed: 810 mmTurning diameter over bed slide: 620 mmTurning diameter in the crank: 1500 mmLength of the offset in front of the faceplate: 750 mmCamber width: 0 - 400 mm18 spindle speeds: 9 - 450/14 - 710 rpm.42 feeds: 0.09 - 5.6 mm / rev42 flat feeds: 0.045 - 2.8 mm / revFaceplate diameter: 800 mmSpindle bore: 86 mmBed width: 540 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- new main spindle- sliding upper bed- Faceplate Drm. 1200 mm- Faceplate Drm. 800 mm- Multifix steel holder with 3 cassettesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bind ...

Facing lathe make HEYLIGENSTAEDT type 405 EV 2500Masch. -No: 190472 built in 1967 with sliding upper bedTop height from the underbed: 740 mmTurning diameter in the lower bed: 1480 mmTop height in the upper bed: 420 mmTurning diameter in the upper bed: 840 mmBed length: 2500 mmTurning length in the upper bed: 2000 mmTurning length in pushed-back lower bed: 1500 mm18 spindle speeds: 9 - 450 rpm.Longitudinal feeds: 0.09 - 2.8 mm / revCross feeds: 0.045 - 1.4 mm / revSpindle bore: 86 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- sliding upper bed- faceplateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mach ...

Turning diameter: 1120 mm Turning length: 6000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id   3414 MAKE   Heyligenstaedt TYPE   ND 560 YEAR   1968 SPECIFICATIONS Swing over bed Ø  1.120 mm Control   NUM 760 Swing in the gap Ø  760 mm Distance between centres   6.000 mm Work piece weight   16.000 kg Spindle speeds / ranges   900 Rpm Heyligenstaedt cnc lathe  

Center height: 0 mm Center distance: 2000 mm Spindle bore: 0 mm Make Heyligenstaedt Type 900 ESa Year 60 er Heyligenstaedt Facing lathe Centre height (mm)Swing bed = 1.780 4 chuck = 1.500 Spindle boreTurn length = 2.000 Turning speed = 180 Rpm Main power = 25 kW  

Turning diameter: 930 mm Turning length: 5000 mm Turret positions: 12 CNC Brand: NUM CNC Model: 1060 Make Heyligenstaedt Type Heynumat 3U x 5000 Year 1976 / 1989 NUM 1060 Centre height (mm) Swing = 930 Center distance (mm) DBC = 5000 Spindle bore Bore = 125 Slamt bed machine12 Position Vdi turretchip conveyor full length  

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2750 mm y-travel: 400 mm z-travel: 325 mm spindle taper ISO: 50 throat: 450 mm turning speeds: 31,5-2000 U/min Feed: 0,4-200 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: 860 steady: 860 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1500 mm turning length: 10000 mm speed: 1,4 - 71 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mm turning length: 850 mm control: Philips total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working r ...

Ref. -No.: 10154 Manufacturer: HEYLIGENSTAEDT Year of construction: 2014 Retrofit: 2015 Type of control: CNC Control: SINUMERIK 840D solution line Storage location: Halberstadt Country of origin: Deutschland Bed width: 2000 mm Feed rate: 1-5000 mm / min Turning Diameter: 2600 mm Turning Length: 10000 mm Centre Distance: 11500 mm Faceplate Diameter: 2000 mm Spindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPM Max. Torque: 120 Nm Max. Workpiece Weight: 40000 - 70000 kg Total Power Requirement: 230 kW Cross slide shift (X-axis): 640 mm Further information:

Separating clutch, adjustable gear motor, variable speed gear motor, electric motor -Spare part comes from a Heyligenstaedt type Heycop 3UN / 2000 -Rapid traverse: for lathe -Gearbox manufacturer: SEW -Motor manufacturer: SEW type DFW80K-2BS -Motor power: 0.75 kW 2760 rpm -Gear output speed: 1480 rpm -Brake and clutch: 24 V -Hollow shaft: Ø 25 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 615/350/H240 mm -Weight: 56 kg

turning diameter:* mm turning length:* mm control: 840 weight of the machine ca.:14 t swing over bed:480 mm turning diameter over bed:330 mm turning diameter over bed slide:250 max. swing dia.:695 mm

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Facing lathe DP 800

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø:        1900mm Swing over cross slide Ø:1520mm DBC Turning Length:      2500mm Spindle bore:            102mm Spindle power:           45kW Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Length:                  6800mm Width:                   2800mm Height:                  2800mm Weight:                  10000kg

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.