used HAULOTTE Rotating tower cranes

Capacity: 230 kg Weight: 830 kg Lifting height: 6000 mm incl. battery and charger integrated

Haulotte Work Platform HA 32 PX Y.O.M. 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Special price

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

Haulotte Compact 10 scissor lift Working height 10,14m Platform length max:3,22m Machine width:1.2m Payload 450Kg

Working platform Haulotte Manufacturer Haulotte Type HA 32 PX built 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Working height approx. 31,8m Platform height approx. 29,8m Horizontal reach approx. 21,60m Maximum load capacity 250 kg 4-wheel drive and steering, swing axle 3 steering modes, front wheel steering, rear wheel steering, all-wheel steering, crab gear. Differential locks Platform dimensions 2,44x0,91m Length in basic position 11.7m Width 2,53m Transport length 11.7m, then transport height 2.8m Transport length 8,9m, then transport height 3,75m Wheelbase 3,5m Ground clearance 38cm Travel speed 0.5-5 km/h All technical information to the best of our knowledge, but without guarantee! Special price

; Gross weight [kg]: 2330; Rear tyres remaining: 82; Front tyres remaining: 99; Inspection Date: 2023-03-21; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 2630; Rear tyres remaining: 65; Front tyres remaining: 92; Inspection Date: 2023-03-21; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 4040; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 1730; Inspection Date: 22023-11-06; Amount of previous owners: 1; Lift height[mm]: 618; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 1655; Lift height[mm]: 620; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 2630; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 2330; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 2150; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

Haulotte HA16RTJ PRO!Year of construction 2018Operating hours 1028 hCE certificate available!TOP machine with pendulum axle, endless rotation of the upper carriage and 4 wheel steeringWorking height 16 mPlatform height 14 mMaximum range 8.3 mArticulation point 7.65 mMaximum load capacity 230 kg (2 pers.)Platform dimensions 1.83 x 0.80 mLength in basic position 6.75 mWidth 2.3 mHeight when retracted 2.3 mVertical swivel range of the basket arm 140° (- 80° / + 60°)Platform swivel range 165° (- 75° / + 90°)Swivel range of the superstructure 360° continuousOverhang 10 cmWheelbase 2.1 mGround clearance 37 cmInclination 5°Driving speed 5.2 km/hMaximum climbing ability 40%Turning radius - outside 3.75 mMotor Kubota 18.5 kW (Stage 5 in EU)Total weight 6,540 kgTransport length 5.05 mTransport height 2.4 mOff-road tires made of solid material 830 x 285 mmMaximum wind speed 45 km/hMachine d ...

; Gross weight [kg]: 7040; Inspection Date: 2024-01-02; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

Haulotte Compact 12 DX work platformPresenter with few hoursYear of construction 2022Operating hours: 177hRaises, lowers and drivesCE certificate available!Working height 12.06 mPlatform height 10.06 mMaximum load capacity 450 kg (3 pers.)Boom load capacity 150 kgNumber of extensions 1Platform length 2.45 mPlatform length with extension 3.7 mPlatform extension 1.2 mPlatform width 1.45 mPlatform dimensions - extended 3.7 x 1.45 mTransport height 1.7 mHeight when retracted 2.56 mWidth 1.78 mLength 3.18 mWheelbase 1.84 mGround clearance 28 cmDriving speed 0.6 - 5.5 km/hCan be moved at a maximum height of up to 8.15 mMaximum climbing ability 40%Inclinometer 3 °Raising and lowering time 35 s / 51 sTurning radius - outside 3.5 mTires - foam filled 26 x 12 - 16.5Engine Kubota, 18.5 kW (Stage 5 in EU)Hydraulic oil tank capacity 75 lTotal weight 3965 kgMachine works well!

; Gross weight [kg]: 6600; Inspection Date: 2024-01-20; Amount of previous owners: 1; Maximum lift capacity [kg]: 250

; Gross weight [kg]: 2760; Rear tyres remaining: 100; Front tyres remaining: 100; Inspection Date: 2023-09-29; Maximum lift capacity [kg]: 200

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Sale due to restructuring. Stainless steel ventilation Tower 4700 mm, diameter height approx. 1250 mm, material stainless steel Tower now available. Loading with a forklift Questions under 02131 / 4064849 Mr. Rössler

Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Gathering tower VAC-100a Horizon VAC-100a Suction air gathering machines - Technology: Touch & Work - Model: Suction and blow air collection tower - Number of stations: 10 per collection tower - Error prevention: false, double-leaf and jam control - Job memory: 9 memory slots for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Double cycle (non-stop operation) - Shooting (1-fold and 2-fold) - Brochure program - Block program - selective collection - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Capacity: up to 9,500 sets/h - Current: 230V/50Hz - 1.86kW - Dimensions: 842x652x1.961mm - Weight: 310kg On request, we can organize the following points for you: Packaging, loading, transport (by s ...

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

EVAPCO LRT 3-62 Product number:M18-3193 Cooling capacity:170 kW Number of fans:1 Refrigerant:Water Voltage:400 Volt Motor power:1,5 kW Dimensions:3100 x 1100 x 2100 mm Weight:700 kg Number in stock:1 piece(s) Nice Evapco cooling tower with 1 fan. Mentioned capacity at a water temperature of +32/27°C (inlet/outlet) and a wet bulb temperature of +22°C. Please also visit ou website: used-refrigeration

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Gathering tower VAC-100a Horizon VAC-100a Suction air gathering machines - Technology: Touch & Work - Model: Suction and blow air collection tower - Number of stations: 10 per gathering tower - Error prevention: incorrect, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Double cycle (non-stop operation) - Shooting (1x and 2x) - Brochure program - Block program - selective collection - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Output: up to 9,500 sets/h - Electricity: 230V/50Hz - 1,86kW - Dimensions: 842x652x1.961mm - Weight: 310kg On request, we can organize the following points for you: Packaging, loading, transport (by ...