used HAULOTTE Rotating tower cranes

Capacity: 230 kg Weight: 830 kg Lifting height: 6000 mm incl. battery and charger integrated

Haulotte Work Platform HA 32 PX Y.O.M. 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Special price

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

Haulotte Compact 10 scissor lift Working height 10,14m Platform length max:3,22m Machine width:1.2m Payload 450Kg

Working platform Haulotte Manufacturer Haulotte Type HA 32 PX built 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Working height approx. 31,8m Platform height approx. 29,8m Horizontal reach approx. 21,60m Maximum load capacity 250 kg 4-wheel drive and steering, swing axle 3 steering modes, front wheel steering, rear wheel steering, all-wheel steering, crab gear. Differential locks Platform dimensions 2,44x0,91m Length in basic position 11.7m Width 2,53m Transport length 11.7m, then transport height 2.8m Transport length 8,9m, then transport height 3,75m Wheelbase 3,5m Ground clearance 38cm Travel speed 0.5-5 km/h All technical information to the best of our knowledge, but without guarantee! Special price

; Gross weight [kg]: 2330; Rear tyres remaining: 82; Front tyres remaining: 99; Inspection Date: 2023-03-21; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 4040; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 1730; Inspection Date: 22023-11-06; Amount of previous owners: 1; Lift height[mm]: 618; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 1655; Lift height[mm]: 620; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 2630; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 2330; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 2150; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

Haulotte Compact 12 DX work platformPresenter with few hoursYear of construction 2022Operating hours: 177hRaises, lowers and drivesCE certificate available!Working height 12.06 mPlatform height 10.06 mMaximum load capacity 450 kg (3 pers.)Boom load capacity 150 kgNumber of extensions 1Platform length 2.45 mPlatform length with extension 3.7 mPlatform extension 1.2 mPlatform width 1.45 mPlatform dimensions - extended 3.7 x 1.45 mTransport height 1.7 mHeight when retracted 2.56 mWidth 1.78 mLength 3.18 mWheelbase 1.84 mGround clearance 28 cmDriving speed 0.6 - 5.5 km/hCan be moved at a maximum height of up to 8.15 mMaximum climbing ability 40%Inclinometer 3 °Raising and lowering time 35 s / 51 sTurning radius - outside 3.5 mTires - foam filled 26 x 12 - 16.5Engine Kubota, 18.5 kW (Stage 5 in EU)Hydraulic oil tank capacity 75 lTotal weight 3965 kgMachine works well!

; Gross weight [kg]: 7040; Inspection Date: 2024-01-02; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 2760; Rear tyres remaining: 100; Front tyres remaining: 100; Inspection Date: 2023-09-29; Maximum lift capacity [kg]: 200

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min