used HARRISON Cycle Lathes

Center height: 200 mm Center width: 1250 mm gr. Turn-Ø over bed: 400 mm Spindle bore: 55 mm Spindle holder: Camlock D1 6" mm Pick-up cone of tailstock quilts: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Space requirement: 2900 x 1800 x 1500 mm Weight: 2200 kg

Key data: 200 mm, 400 mm, 40 U/min

Harrison in TOP CONDITION. SH 200 mm SW 1500 mm Tailstock MK5 Removable bridge Emergency Out , Bremese , Feed Protection Coolant system Face plate 2 lathe chuck Grinding device Cabinet with high-quality accessories.

Harrison in TOP CONDITION. SH 200 mm SW 1500 mm Tailstock MK5 Removable bridge Emergency Out , Bremese , Feed Protection Coolant system Face plate 2 lathe chuck Grinding device Cabinet with high-quality accessories.

Center height: 0 mm Center distance: 800 mm Spindle bore: 50 mm Make  Harrison 19 Type 190 Year 70 er LUZ Universal drehmaschine draaibank Centre height (mm) Swing = 380 Center distance (mm) DBC = 800 Spindle bore Bore = 50 Speeds 1500 Rpm chuck / tool system  

This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.

Harrison M500 Ø 530 x 2000 mm Distance between centers: 2000 mm Swing over bed: 530 mm Swing over cross-slide: 370 mm Swing in gap: 730 mm (200 mm long) Diametre of main spindle bore: 80 mm Power on main spindle: 9,7 kW Number of speeds: 31 > 1600 rpm Length: 3450 mm Width : 1170 mm Height: 1830 mm Weight: 2277 kg

Key data: 380 mm, 1200 mm

Turning length: 1200 mm Rotation diameter: 380 mm above bed Spindle Passage: 50 mm Spindle speeds: 35 - 1,500 rpm. Equipped with: - 3-jaw chuck with different jaws - Steel tank Country of origin: UK Machine LxWxH: 2500 x 950 x 1200 mm Machine weight: 1200 kg

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 40 - 2500 U/min centre height: 165 mm spindle bore: 38 mm total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,1 x0,9 x 1,3 m Lead and pull spindle lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Machine in excellent condition, still installed by the user Specifications Harrison Producer Model 1460 Year 2003 Condition Used CNC FANUC Maximum workable length * 1 (capacity) 1500 bar passage 78 spindle connection ASA 8 spindle speed 2200 spindle power 11 kw spindle 300 mm manual turret 4 positions turning on the wagon 270

turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1.200 mm Height of centres: 400 mm swing over bed: 800 mm diameter over cross-slide max.: 510 mm control: FANUC 21i-TB spindle bore: 250 mm Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Center lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual Turning diameter over bed 330 mm Turning diameter over support 210 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 40 - 2500 rpm Center height 165 mm Spindle bore 38 mm Total power requirement 2.2 kW Machine weight approx. 0.7 t Space requirement approx. 2.1 x 0.9 x 1.3 m Approx. Onsite Dimension. (l x w x h): 2,100 x 900 x 1,300 mm, weight approx.: 700 kg

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Tip height: 300 mm centre distance: 1500 mm gr. Turning diameter over bed: 625 mm spindle bore: 105 mm spindle retainer: Gr. 8 mm taper of tailstock Quill: 5 MK spindle speed: 6.6-2000 RPM elect. Supply: 400 V, 15 kW space: 4400 x 2050 x 1820 mm weight: 5200 kg

No. 5197: 1 Gebr. Cycles Lathe Fabr. PINACHO, type Mustang 200, Bauj. 2001

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

- Swing diameter over bed: 490 mm - Distance between centers: 1000 mm - Swing diameter over face slide: 280 mm - Speed range: 1 - 625 / 1 - 3,000 rpm - Transmission stages: ZF - 2 - Spindle passage: 93 mm - Spindle bearing diameter: size 8 - 130 mm - Tailstock mount: MK5 - stroke 160 mm - Control: Siemens Manualturn - Total power: 17 kW - Machine weight: 3,600 kg - Dimensions (W x D x H): 3.0 x 1.8 x 2.0 m - Operating hours: 31556 h Details without jaw chuck, contour calculation option and contour handwheel, multifix mount, spindle head according to DIN 55027 Accessories Documentation, suction, no other accessories

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock

Ref. No. 00789 Description of the system: Cycle-controlled lathe Manufacturer: Pinacho (Metosa) Model MUSTANG 225 Year of construction 2000 Technical data CNC control FAGOR 8055 TC Center height 225mm Center width 1000mm 8-speed turret VDI 30 Accessories Fixed bezel Three-jaw chuck Soft CNC 3.06 Energized condition Stainless steel parts are currently being machined Axles ok Rotate fits on it Small drawback: Revolver swivels like on the video In this case, counterclockwise, which is also the direction that still works, which is also accurate to change – in the other direction, the turret has an offset, from the technician it was said that it would not be worth repairing it But it can be replaced or repaired. Machine is running and is currently in operation. A viewing can be arranged at any time. Submission date: Immediately after arrangement ...

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions