We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
used
SKINNER- DERINDER, GRASSELLI TYPE: N520 Technical description: Material: Stainless steel Working widht: 470 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 850 x 1720 mm
used
SKINNER- DERINDER, GRASSELLI Technical description: Material: Stainless steel Working widht: 700 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 1100 x 1400 mm
used
Grasselli C35.P Derinder Q14S05/P406 Year: 2020 400V 3 phase plug 2 x Available
used
GRASSO RC7212E Product number:M15-6041 Cooling capacity:109 kW Refrigerant:NH3 Voltage:400 Volt Motor power:75 kW Dimensions:± 5000 x 2600 x 3000 mm Weight:± 6000 kg Year:2000 Number in stock:1 piece Well maintained Grasso NH3 glycol refrigeration plant for glycol output temperatures until -45°C (109 kW). Consisting of: a Grasso RC7212E two-stage piston compressor (frequency driven), Q-plate (Vahterus) glycol/ammonia flooded evaporator, Baltimore evaporative condenser VCL048G and a control box for the whole plant. Please visit also our website: used-refrigeration
used
Grasso semi-automatic packing machine
used
Reference ID PP-31002 Category Folder Gluer Manufacturer - Model 1850 Year Built 1991 Color- Impression- Working Hours - Speed-- Size 1300mm x 1850mm Min. Size 150mm x 420mm Condition Good Location Europe Availability Immediately Machine Description Aspirated introduction, Linear introduction, automatic bottom and 4/6 corners with mechanical flippers Left-hand disk gluer Nordson gluer Front and rear aligners at the "Trombone" section Front aligner at the exit conveyor Pressure conveyor Accessories, spare parts available at the dismantling date, electrical diagrams,
used
Machine Description linear gluing, automatic bottom, 4 corners the main engine and the carpet engine are almost new It is equipped with a ZATOR cold glue system WITH 3 spray guns
used
Product number: 2788 Type: SL600 Working width: 600 mm Knife set: 5 mm Compressed air: 7 bar Power: 3 x 400V, 50Hz, 5kW Dimensions: 1050 x 1250 x 2000 mm
used
Drill-Press-Automat Grass Pot hinge bore The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side rail set -Type: 7607/350/2S-RER-SET/9006/1 -Item no.: 45859-01 -Length 350 mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 350/100/H40 mm -Weight: 0.3 kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/300/2S-RER-SET/9006/1 -Item no.: 45858-01 -Length 300mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 300/100/H40 mm -Weight: 0.3kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails, front support -Manufacturer: Grass, NP 2-S-RER front support set -Type: 7607/550/2S RF SET/9006/1 -Item no.: F102048036101 -Length 550 mm -Quantity: 6x set available -Price: per set -Transport dimensions: 550/150/H40 mm -Weight: 0.5kg/set
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set
used
PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V
used
Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Blue Max mini Hardware drilling machine Spindle number 6 Table-top model Engine 0,8 KW 400V 50 Hz Masch. No. 04416 Pneumatic drill feed Fence without stand (optional) Year of build 2016 G & 2574-M3I2J
used
Hettich YYB-800 Hardware drilling machine BLUEMAX YYB-800 type Spindle number 6 (2-3-1) Table-top model 1 KW 230V Masch. No. 09411 Manual drill feed Without stand (optional) Year 2011 G & 2569-M3F6Nl
used
Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J
used
Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Hettich Blue-Max-Mini Fittings drill Number of spindles 4 Tabletop model without base frame (optional) Motor 0.8kW 400V 50Hz Machine No. 01335 Drill feed pneumatic Stop rulers G&2569-M3F6N
used
Drill for drilling pot belts, drawer guides and any kind of system drilling Top condition many extras
used
Hydraulic Connections Fittings in Original Packaging Best Quality Made in Germany, Italy Price: â?¬ 2,00 / kg
used
Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...