used GILDEMEISTER Turning Machines Lathes For Bars

Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING !! THE MACHINE IS IN VERY GOOD CONDITION !!

with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D POWERLINE, turret with 12 tool positions, max. speed: 4000 rpm, number of axes: 3, max. circulation diameter: 300 mm, max. turning diameter: 300 mm, max. turning length: 300 mm, with a workpiece loading system, Fabr. EWAB

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

Turning diameter: 910 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Manuel Plus MAKE   Gildemeister TYPE     NEF Plus 710 YEAR    1995 SPECIFICATIONS Swing over bed Ø  710 mm Control    MANUEL PLUS Swing over cross slide   420 mm Distance between centres   2000 mm Spindle bore   92 mm Spindle speeds / ranges   1800 Rpm DIMENSIONS Length    4250 mm Width      2200 mm Height     1900 mm Gildemeister NEF Plus 710 cnc lathe  

Turning diameter: 910 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Manuel Plus MAKE   Gildemeister TYPE     NEF Plus 710 YEAR    1995 SPECIFICATIONS Swing over bed Ø  710 mm Control    MANUEL PLUS Swing over cross slide   420 mm Distance between centres   2000 mm Spindle bore   92 mm Spindle speeds / ranges   1800 Rpm DIMENSIONS Length    4250 mm Width      2200 mm Height     1900 mm Gildemeister NEF Plus 710 cnc lathe  

This GILDEMEISTER CTX 400 E Lathe was manufactured in the year 1999 in Germany. It is equipped with a HEIDENHAIN CNC control and single driven tool. The working width is approx. 635 mm and the through-hole diameter ø50 mm through the head. It has 2 axes: z = 635 mm and x = 220 mm.

This Gildemeister Sprint 42 linear Lathe was made in the year 2006. It is equipped with a Fanuc 160i control unit. The machine has a spindle speed of 6500 rpm.

This Gildemeister CTX 400 S2 Lathe was manufactured in the year 1998 in Germany and has 65655 production hours. It is equipped with a HEIDENHAIN CNC PILOT 3190/4290 control unit. The machine has a spindle speed of 25-5000 rpm.

This GILDEMEISTER CTX 400 Serie 2 Lathe was manufactured in the year 1998. It is equipped with a DIN Plus Turn Plus control. It disposes of a turret with 12 tool positions and a tailstock.

This Gildemeister CTX 510 Lathe was manufactured in the year 2004 in Italy and has 36976 production hours. It is equipped with a Fanuc Series 21i-TB control unit. The machine has a spindle speed of 20-3500 rpm.

This Gildemeister NEF 710 Lathe was manufactured in 1998. It is equipped with Siemens 1 PH7137 main drive (rpm 2000). This machine has a tip height of 345mm and a tip width of 2000mm. It has a spindle bore of 92mm, a maximum torque of 1050 kN and a maximum chuck of 400mm. Contact us anytime for further information.

This Gildemeister TWIN 32 lathe was built in the year 2001 in Germany. It is equipped with a SIEMENS Sinumerik 840D control unit. The machine has a main spindle speed of 8000 rpm. 2 units are available.

This Gildemeister Sprint 65 linear Lathe was manufactured in the year 2008 in Italy and has 22399 production hours. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.

This GILDEMEISTER CTX 420 V6 linear Lathe was made in 2007 and has 10282 production hours, of which 6954 are working hours. It is controlled by a SIEMENS 840D POWERLINE control unit. The machine has a spindle speed of 6000 rpm.

This Gildemeister sprint 65 linear Lathe was manufactured in the year 2007 in Italy. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.

Spindle 1: 20 kW - 5000 rpm Spindle 2: 17 kW - 5000 rpm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis / Driven A-axis X1 movement: 165 mm X2 movement: 165 mm Y1 movement: 50 mm Z1 movement: 678 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Swing over bed: 70 mm Distance centre tot centre: 950 mm Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Command: Fanuc 310i Length: 4500 mm Width: 1990 mm Height: 2300 mm Weight: 10 ton Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...