We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.
used
Chop Chopper / Portion Cutter / Chop Cutter Manufacturer: DMS (Dillmann Maschinensystem Saarbrücken) Type: DKS 701 Equipment: Cutting thickness infinitely adjustable: 1 – 30 mm Product size: 200 x 230 mm Insertion length: 700 mm including original instruction manual Machine solid stainless steel Specifications: 400V / 50 Hz / 2.45 kW / 16 A CEE plug Total dimensions: H135 x W180 x D80 cm Weight: 280 kg Year of construction: 2018 Stock machine, immediately available! Function tested / machine is ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493
used
Ice machine/flake ice approx. 135kg capacity/day, incl. pre-tank for approx. 130kg Power (kW)0.62 Voltage (V)230 Coolant CFC free – R 449 A completely stainless steel External dimensions Dimensions: D 80 x W 70 H: 160cm Weight approx. 150kg Ambient temperature min. + 5°C + 35°C Water temperature min. + 5°C +20°C
used
DMS DF25C Piston Filler used Machine was built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in good condition, but should still be thoroughly cleaned before use Video about test run available
used
Numerical control lathe, DMS 8TSY marketed by Utimac, two-spindle, motorized y-axis, Fanuc control, year 2009, bar 65 passage, bellegrandi BA60 collet chuck, BA52 caliper counter-spindle, Iemca Master 880 bar loader in production.
used
Product number: 2232 Type: DMK80C Year of construction: 2014 Bowl: 80 litres Capacity: max 64 kg Knifes: 2 speeds, 1500 / 3000 RPM Bowl: 2 speeds, 8 / 16 RPM Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 1300 x 1200 mm Weight: 1030 kg With temperature indicator
used
Very well maintained 80 liter machine, with 2 x knife shaft speed + 2 x bowl speed
used
Cutter / Cutting Mixer / Bowl Cutter Manufacturer: DMS (Dillmann Maschinensysteme Saarbrücken) Type: DMK 80 V2 Equipment: Bowl: stainless steel, 80 liters capacity, designed for approx. 65 kg roast Blade speed infinitely variable from 1000 - 3600 rpm Mixing gear backwards, infinitely variable from 100 - 300 rpm 2 bowl speeds 8/16 rpm electric knife shaft brake Automatic switch-off when opening the lid Thermometer digital Noise protection cover Integrated switch box 6er knife head additional 2x 6 knife set including 4 wrenches original instruction manual Storage machine, immediately available! Specifications: 400V / 50/60 Hz / 21+0.9 kW / 43 + 2.8 A / 64 A CEE plug Total dimensions with the lid closed: H115 x W135 x D120 cm Year of construction: 2018 Weight: approx. 1040 kg Function tested / Machine ready for immedi ...
used
DMS 90 CNC M3 Tube and Profile Bending Machine Max. Tube Outside Diameter: Ã90 mm Max. Wall Thickness: 4 mm Max.Bending Radius: 300 mm 6 meter pipe loading capacity Pipe cutting system STEP IGES drawing program Rolling system Many tools are included More details: https://doganermak/detay/dms-90-cnc-m3-PR52
used
with 6 knives Bowl capacity 80l approx. 65kg fine meat with dial thermometer completely stainless steel 2 bowl and knife speeds Speed 1500 and 3000 rpm selectable
used
Vacuum Packers Dillmann Machine Systems DMV 400 DMS Specifications: 230 Volt / 50 Hz / 4 A Year of construction 2008 Weight: 40 kg Chamber size: D420 x W455 x H110 mm Welding bar length: 430 mm max. bag size: 390 x 450 mm Machine design Completely stainless steel Compact, solid design Surface sanded domed acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 16 m³ capacity Ease of use Vacuum-adjustable Welding time adjustable Stock machine, immediately available! Function checked condition see original pictures. 03423-706493
used
DMS mobile slicer, type: DKS 701, serial number: S 17250, year of construction: 2018, 400 V, 3 Ph, 50/60 Hz, 4.4+1.8 A, 1.7+0.75 kW, chamber dimensions: 230 mm x 200 mm, total dimensions: 1800 mm x 800 mm x 1350 mm.
used
Treif model: 08 55 stainless dicer, max product 350mm x 90mm x 90mm, variable speed
used
Treif Falcon portion cutter with check weigher and sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, products up to -3° C, the machine is currently equipped for bonless products.
used
White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available
used
Item: Marel IPM3 X300 Slicer and Portion Cutter Category: Cutter / Slicer Manufacturer: Marel Model: IPM3 x300 Year: 2004 Description: Used Marel IPM3 X300 Slicer and Portion Cutter with: • Stainless steel slicer and portion cutter machine • Rotating blade • Complete w/ laser eye weigher • Volume scanner m. INW3 x 400 • M Series 3000 controls Final verification by Marel This is an ideal machine to cut fish r meat in portions according to a pre-defined weight and dimension Video available
used
Capacity: up to 1800 pc/h Main motor power: 1 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 120 Lenght: 80 Height: 175 Delivery time: after the advanced payment machine is ready for delivery
used
White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available
used
Portion cutter Marel I-Cut 22 Dual-lane portion cutter for cutting a product into portions of exact weight. Laser scanning system provides 3-D scanning measures and as a result - high accuracy of cutting. Cutting speed is up to 1500 strokes per minute on each lane Power: 8 kW Electricity: 3 x 230 + PE V, 50/60 Hz
used
We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.
used
SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.
used
SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.
used
PORTIONER, HANDTMANN MODEL: GMD99-1 Technical description: Serial number: 1052 Power: 220-240 V / 50-60Hz Pression: 7 bar/100psi Bandwidht: 220 mm Dimensions: 1600 x 900 x 1300 mm
used
Marel Grading line consisting of: DWU 225 weigher Serial No: A002514 C 300/460 Sorting conveyor - 10 pots Serial No: A002566 300mm wide belt - Intralox Modular
used
Compact and versatile vacuum filler for small producers. An individual machine for the production of specialities and equipped with the proven double screw technology as used in large industrial machines. Double screws made out of stainless steel. Double screw housing made of high-quality industrial plastic approved for contact with food. The perfect solution for maximum cost-effectiveness, the HP3 is predestined for the transition from a piston filler to a Vemag vacuum filler. Can handle soft and firm masses. Minimu residual product volumes. Quick and easy cleaning. Perfect hopper infeed geometry for a continuous product flow. Hygienic vacuum ssytem with easily accesible cleaning area. Controls with 7 Touchscreen display and precise servo technology with intelligent control unit. The machine has only: 175 operating hours! Filling output: up to 2.000 kg/h. Portion weight: 0 - 100.000 gra ...