used AMADA CNC Bending Presses

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.

offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms

Key data: 170 t, 3110 mm

Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel

Offer 24160 Specifications: - Max. working length 3110 mm - Column passage 2700 mm -Max. Press force 100 t - Projection 415 mm - max. stroke 200 mm - Max. installation height 470 mm - Table height approx. 960 mm - Table width 60 mm - Feed speed / rapid traverse 1 - 100 mm/s - Pressing speed 1 - 10 mm/s - Retraction speed 1 - 100 mm/s - Drive power 7.5 kW - Space requirement approx. W 4300 x H 2950 x D 2300 mm - Weight approx. 7.5 t - With: - CNC control AMADA - for Y1+2 , X, Z - AMADA DIGIPRO measuring system -Light barrier - E.- Footswitch - Miscellaneous tools

Capacity: 0 t Operating hours: 32165 Technical data Pressure: 25 to Max. Bending length: 1250 mm Passage between press bars: 320 mm Distance between the: 1020 Max. stroke: 100 mm Depth of throat: 200 mm Feed rate: 75 mm/s Working speed: 10 mm/s Return stroke speed: 80 m/min Table length: 1200 mm Table width: 60 mm Table height: 865 mm Number of spacers: 6 pce Height of the spacers: 120 mm Number of cylinder: 1 pce Oil capacity: 30 l Voltage 50 Hz 3x: 400 Volt Motor power: 4 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2000 mm

Capacity: 17 t Opening maximum: 150 mm Workpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used !

- Updated CNC ? Task 84 Titano plus, year 2016 - Pneumatic tie downs - Open Height: 0 mm - Hole: 0 mm - Backgauge movement: 0 mm - Table width L -R: 0 mm - Inclination of beam: 0 mm - Operating hours: 0 - Type: 0 - Pressure force: 100 t - Bending length: 3.100 mm - Axes: 7 - Working area: 0 mm - Distance between uprights: 0 mm - Returning speed: 0 mm/seg - Frame type: 0 - Working speed: 0 mm/seg - Locking speed: 0 mm/seg - Throat: 0 mm - Control: CNC TASJ 84 Titano plus 2016 - Stroke max: 0 mm - Oil tank capacity: 0 l - Power: installed max: 0 kW - Weight: 6.750 kg - Dimensions (long x wide x high): 3.750 ? 1.960 ? 2.650 mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 36.500 - Pressure force: 130 t - Bending length: 3.000 mm - Working area: 3.110 mm - Axes: 7 - Distance between uprights: 2.700 mm - Working speed: 1-10 mm/seg - Throat: 420 mm - Control: Operateur II - Stroke max: 200 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 4.340 ? 2.000 ? 2.415 mm - Weight: 4.700 kg

Used machine in good condition. Available for immediate delivery. - Pressure force: 50 t - Bending length: 2.050 mm - Axes: Y; X; R1; R2; Z - Control: Delem EMA DA 42

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

- 2 robots, loader and folder - PROMECAM tooling - Software BENDING SYSTEM 32 - Pressure force: 100 t - Bending length: 3.000 mm - Axes: 8 - Power: installed max: 7,5 + 21 (Robot) kW - Dimensions (long x wide x high): 11.500 x 4.650 x 3.200 mm - Weight: 6.500 kg

1993 Amada Promecam ITS2 - 100/30

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

This AMADA HFT 50-20 Bending Machine was manufactured in 2009 in France. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press brake has operated 11,377 hours so far. Check photo gallery for more details. Contact us anytime for further questions!

Inv. Num. : 7489 Type: HFE 170-3 Producer: AMADA Created: 2000 Parameters: Compressive force: 170 t Maximum ram stroke: 200 mm

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

CNC press brake make AMADA type APX 50.20Ser. -No: APX 50.20 A31213, built in 1993Technical specifications:max.pressing force: 50 tWorking length: 2085 mmPassage between the uprights: 1520 mmStroke: 100 mmThroat: 400 mmTable height: 950 mmOpening width: 370 mmWorking speed: 9 mm / sDelivery speed: 73 mm / sOpening speed: 85 mm / sExternal dimensions approx .: 2600 x 2250 x 2100 mmWeight approx: 3000 kgWith- a complete set of tools- Operator control- Two-hand operation- foot switch- Control defectiveusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton

3000 x 1500mm 4000w

The best preserved Amada Europe 258 machine on the market Only 17,000 hours Year 2003 It can be seen at work only until the end of October this year

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg