used VERSON DIMECO H Frame Eccentric Presses

Press force: 300 t Stroke length: 200 mm Stroke speed: 20-60 1/min Shut height: 680 mm Ram adjustment: 200 mm Overall size: 2600x2000x4200 mm

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

sheet width - max.: 750-900 mm coil weight: 3,50 - 4,00 t coil internal dia.: 400 - 500 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: 1,90 t dimensions of the machine ca.: 1,50 x 1,90 x 2,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0250 mm coil weight: 0,500 t coil internal dia.: 250 - 550 mm coil outside - diam. ca.: 1150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is al ...

material width:500 mm material thickness:0,6 - 1,6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 inlet roll diameter:60 mm max. material thickness:2,0 mm material thickness at 150 mm material width:2,0 mm material thickness at 500 mm material width:1,6 mm weight:0,5 t dimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:300 mm material thickness:0,6 - 2,5 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mm max. material thickness:3,5 mm material thickness at 30 mm material width:3,0 mm material thickness with 300 mm material width:2,5 mm weight:0,3 t Dimensions (WxDxH):0,9 x 1,0 x 1,1 m

material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

Mechanical Press brand Agostino Colombo ton 200 model Paride 2 dimension table 1400 x 1200 mm simension slide 1400 x 1200 mm stroke par minute nr. 20 slide stroke 457 mm . machine in excellent working condition

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools