used SAN ROCO CNC Boring Mills

Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).

Roco PRO BMF-40

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.

Description Grande San Boring Machine Price Negotiable Rocco Al 76 Used a little Made In Italy

Table mm. 1250 x 920 Spindle diameter mm. 80 Tool holder ISO 40 Travel X mm. 1430 Travel Y mm. 985 Stroke Z mm. 850 Spindle speed 1500 rpm Quill stroke mm. 530 ECS CNC accessories

Technical data Table length: 900 mm Table width: 750 mm Longitudinal travel (X-axis): 1500 mm Transversal travel (y axis): 990 mm Vertical travel (z axis): 560 mm Drill spindle diameter: 100 mm Drill spindle travel: 500 mm Spindle speeds: number (steps): 16 from: 12 rpm up to: 1220 rpm Spindle feeds: number (steps): 18 from: 0.025 mm/min Voltage 50 Hz 3x: 380 Volt Various accessories: Digital readout number of axis:: 3 Full splash cabin

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï» ¿ï»¿ï»¿, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

BORING MACHINE Good condition Table dimensions 1300 x 1100 mm X axis 3100 mm Y axis 2000 mm Z axis 2200 mm W axis (bore tube) 600 mm Axis B (rotary table) continuous Horizontal spindle Tool change 30 seats Spindle revolutions 20 - 3000 rpm Spindle power 27 Kw Spindle cone ISO 50

La San Marco NEW 105 MULTIBOILER 3G portafilter machine espresso machine Touch (6) factory price 11,157 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting, which can be easily adjusted via the touch screen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display provides a range of information that is of great benefit to the operator. The illumination of the workplace with adjustable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Groups: 3  ...

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

Pallet with 26 San Jamar cup dispensers, model: EZ-FIT, cup: 73 - 121 mm, total dimensions: 1200 mm x 800 mm x 800 mm.

Tilting Lifter San Cassiano ER 2 * Year of construction: 2006 * Condition: checked & cleaned * Suitable for San Cassiano bowls * Motorized bowl discharge * Incl. Mesh fence with safety switch

Hydra Froce Dough Mixer San Cassiano HE 220 * Year of construction: 2006 * Condition: refurbished * 2x Dough mixer * 4x Movable bowls * 1x Tilting lifter (optional) * Capacity: 220 kg at 65% dough hydration * Excellent dough hydration and gluten development in a short time * Lower dough temperature * Energy saving * Multifunctional mixer, suitable for various types of dough

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm *. * X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &a ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.

Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary Ta ...

CNC Floor Type Boring & Milling Machine   PAMA Speedram 1000   Manufactured new in 2008 - with only 4500 program run hours   Heidenhain iTNC 530 CNC Control   X 13000 mm   Y 3000 mm   Z 1000 mm   W 700 mm   Pama NC-Rotary travelling table   Table size 2000 x 2200 mm   Table load 16 t   B-Axis 360°/0.001° with contour milling capability   V-Axis table travel 2000 mm   Boring spindle diameter 150 mm   Spindle taper ISO 50   Spindle drive 37 KW   Spindle speeds to 3500 rpm   Floor plates   Huron type universal head   X,Y,Z hydrostatics   Optical scales X,Y,Z,V Axes   Linear magnetic scale W Axis   Coolant through the spindle 30 bar with filtration unit   Automatic attachment clamping on the ram   PREPARED for ATC   Excellent machine condition - Under power - Immediately available

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.

Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

1 x CNC table boring mill Wotan Rapid 1 Year of manufacture: overhauled / with new control system 2012 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5