We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.
used
Manufacturer: SABROE Tip: SV 140 off; very good
used
SABROE PAC 163 HR-A Brand:SABROE Type:PAC 163 HR-A Stock number:M21-4474 Cooling capacity:1,437 kW Application:Cooling / Heating Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:175 kg Voltage:400 Volts Power consumption:126 kW Motor power:160 kW Dimensions:5800 x 2660 x 2850 mm Weight:8,800 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Description: A very well maintained complete Sabroe water-cooled water chiller/heat pump. This water chiller is equipped with a frequency-controlled Sabroe SAB163HR compressor (up to 6,000 RPM), a Schorch 160 kW electric motor, an Alfa Lava evaporator and condenser, a complete control cabinet with a Vacon frequency controller and a Unisab II compressor/chiller controller. All necessary documentation is available. The stated capacity is for water +12/+7°C in/out. Visit also our website: used-refrigeration
used
SABROE SMC 16-100 Brand:SABROE Type:SMC 16-100 Stock number:M21-1268 / M23-1350 Cooling capacity:338 kW Displacement:905 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:100 kW Dimensions:3100 x 1100 x 1900 mm Weight:2,500 kg Number in stock:2 piece(s) Price:Quotation request Description: An old but good Sabroe 16 cylinder compressor with electric motor. Mentioned capacity at -10/+35°C. Visit also our website: used-refrigeration. Just to give you an impression about the brands we have in stock:Grasso, Sabroe, Bitzer, Howden, Copeland, Baltimore, Evapco, Goedhart, Helpman, Friga Bohn, Guentner, Carrier, Trane, Lennox, MTA etc.
used
SABROE CHILLPAC 106E Brand:SABROE Type:CHILLPAC 106E Stock number:M21-4529 Cooling capacity:538 kW Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:27 kg Voltage:400 Volts Motor power:132 kW Dimensions:3200 x 1000 x 2000 mm Weight:4,045 kg Year:2007 Number in stock:1 piece(s) Price:Quotation request Description: Very nice water-cooled ammonia Sabroe chiller with a Sabroe piston compressor, a 132kW e-motor and a Unisab II controller. Mentioned capacity at a water temperature of +12/7°C (in/out) and a condenser water temperature of +30/35°C (in/out). Visit also our website: used-refrigeration
used
Used Sabroe DXA26F water cooled chiller. Complete with a Sabroe / Stal S26B screw compressor, ABB M2FA 315 SMA 2 V36 elektromotor: 50 Hz - 200 kW - 2977 RPM, Alfa Laval MK15-BWFDR plate heat exchanger as condenser with a volume of 201,9 liters, plate heat exchanger as evaporator, oil seperator, oil cooler, Grundfos MG160MB2-42FF300-H3 water pump, VEM K21R 63 G 2 /2292 pump and pressure and safety switches and a Siemens Simatic HMI display. Product specifications: Brand: Sabroe Type: DXA26F Product type: Water Cooled Chiller Capacity kW: 630,0 (Capacity based on -9°C/+40°C) Capacity Tons: 179,1* Refrigerant: NH 3 (ammonia) Refrigerant Type: R717 Weight in kg: 6.545 Sizes: 4950x1800x2670 mm (LxWxH) Compressor(s) type & model: Stal S26B Display: Siemens Simatic HMI
used
Used Sabroe TSMC 188 reciprocating compressor on NH3 (Ammonia). Complete with a Schorch KA4355M-KZ81T-Z electric motor - 50 Hz - 120/160 kW - 740/993 RPM, Sabroe OVUR 6006 oil separator, Sabroe OVUR 3211D oil separator and pressure and safety switches/gauges. The compressor has a displacement of 1283 m³/h. Specifications: Brand: Sabroe Type: TSMC 188 Refrigerant: NH 3 (ammonia) kW at -10ºC/+40ºC: 805,3* kW at -20ºC/+40ºC: 545,7* kW at -30ºC/+40ºC: 343,5* kW at -40ºC/+40ºC: 203,7* Electromotor Specs: 50 Hz - 120/160 kW - 740/993 RPM m3 / h: 1283 Remarks |: Y.o.b. 2003 Remarks ||: *Capacity based on a bigger electric motor Sizes: 3700x2100x2070 mm (LxWxH)
used
SABROE SAB 163 HF Brand:SABROE Type:SAB 163 HF Stock number:M23-1354 Cooling capacity:183 kW Application:Freezing Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:200 kW Dimensions:2630 x 1470 x 1725 mm Weight:3,000 kg Year:2015/1993 Number in stock:1 piece(s) Price: Quotation request Description: Good ammonia Sabroe screw compressor (2015) on a frame from 1993. This compressor is equipped with a Unisab 3 controller, a 200 kW E-motor and oil separator. Mentioned capacity at an evaporative temperature of -40°C and a condensing temperature of +35°C using an economizer. Visit our website: used-refrigeration
used
Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor -Coolant: NH/3 -Working pressure: 15 bar -Drive: 35 kW -Speed: 1455 rpm -was stored as a replacement machine -Weight: 1100 kg
used
Sabroe motor-comprressor unit still in operation, available at the beginning of April 2024. R404A gas, ammonia
used
Sabroe SAB 193S skid, dismantled and stored in good condition. R404A gas, ammonia
Refrigerant: R717 (Ammonium) Cooling capacity: 1100 kW / unit. Swept volume: 1000 - 1590 m3/h Compressor rpm 2950 Electric motor: 400 kW, 380 V, 50 Hz Max. Operating Temperature: 100 - 120 0C Max. operating pressure: 24 bar
used
Sabroe reciprocating compressor installation, consisting of: Sabroe reciprocating compressor, type: SMC 116 L HP, serial numbers: 96432, year of construction: 1992, refrigerant: R717, volume: 1118 m³ per hour, 1480 rates per minute, maximum pressure: 18 bar, Schorch motor, 200.0 kW, Lohenner GmbH & Co KG storage vessel, volume: 1090 liter, Alfa Laval heat exchanger, type: M10-WFGI, fabrication number: 30100 / 46029, year of construction: 1992, volume: 107.8 liter, 2 Wilo circulation pumps, type: (2x) DPn125/300-18,5/4 G4B, total dimensions installation: 4400 mm x 2400 mm x 2250 mm. Including switch cabinet, dimensions: 1200 mm x 500 mm x 2700 mm.
used
Sabroe reciprocating compressor installation, consisting of: Sabroe reciprocating compressor, type: SMC 116 L HP, serial numbers: 96433, year of construction: 1992, refrigerant: R717, volume: 1118 m³ per hour, 1480 rates per minute, maximum pressure: 18 bar, Schorch motor, 200.0 kW, Lohenner GmbH & Co KG storage vessel, volume: 1090 liter, heat exchanger, total dimensions installation: 3900 mm x 2350 mm x 2250 mm. Including switch cabinet, dimensions: 1200 mm x 500 mm x 2700 mm.
used
Sabroe reciprocating cooling installation, consisting of Sabroe cooling compressor, type: SMC 11, number: 123437, year of construction: 2003, 1500 rpm, 1131 m³/h, Alfa-Laval plate heat exchanger, type: M10-BWREF, year of construction: 2003, and York refrigerant tank, dimensions: 4400 mm x 2000 mm x 2430 mm. Technical condition unknown.
used
Sabroe reciprocating cooling installation, consisting of Sabroe cooling compressor, type: PAC11.L, number: 501340, year of construction: 2005, refrigerant: R717, Alfa-Laval plate heat exchanger and Sabroe refrigerant tank, type: GHEA 062320C, dimensions: 4400 mm x 2000 mm x 2430 mm.
used
Sabroe reciprocating compressor installation, consisting of: 2 Sabroe reciprocating compressors, type: (2x) SMC 116 L HP, serial numbers: 96430 / 96431, year of construction: 1992, refrigerant: R717, volume: (2x) 744 m³ per hour, 985 rates per minute, maximum pressure: 18 bar, Schorch motor, (2x) 132.0 kW, Sabroe storage vessel, volume: 1980 liter, Thermowave heat exchanger, type: TL 400 NCFL, fabrication number: 10765 / 1996, total dimensions installation: 6000 mm x 2400 mm x 2500 mm, total dimensions heat exchanger: 560 mm x 1150 mm x 2100 mm. Including switch cabinet, dimensions: 1200 mm x 500 mm x 2700 mm.
used
Sabroe reciprocating compressor installation, consisting of: 2 Sabroe reciprocating compressors, type: (2x) SMC 108L, serial numbers: 1116 23 / 1116 22, year of construction: 1999, refrigerant: R717, volume: (2x) 565 m³ per hour, 1500 rates per minute, maximum pressure: 22 bar, Schorch motor, (2x)75 / 86 kW, Sabroe storage vessel, volume: 1010 liter, heat exchanger, total dimensions installation: 4950 mm x 2300 mm x 2150 mm. Including switch cabinet, dimensions: 1000 mm x 400 mm x 2050 mm.
used
Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.
used
11.80 kW, max. 10.5 bar, 56.50 m3/min.
used
14.5 bar, 22.80 m3/min, refrigerant R 404a.
used
Engine type: dry air dryers for plastic Year of manufacture: Overhauled 2017 Color: Turquoise Dry air flow: 10 m ³/h Dry air heating power: 1.1 kW Drive capacity: 0.4 kW Total final value: 1.5 kW Width: 84cm depth: 49, 5cm height: 220cm weight: 80kg Additional information: drying hopper 25 l GRP Completely overhauled with guarantee (not on wearing parts) Storage location: Germany Machine type: Dry air dryer for plastics Year of manufacture: Overhauled 2017 Colour: Turquoise Dry air flow rate: 10 m³/h Heating capacity dry air: 1.1 kW Drive capacity: 0.4 kW Connected Waterberg days: 1.5 kW width: 84cm depth: 49.5cm height: 220cm weight: 80kg Additional information: dry air hopper 25l overhauled with guarantee (not for wearing parts) Location: Germany
used
Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.
used
14.5 bar, 43.50 m3/min, refrigerant R 404a.
used
The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.