used REM Milling and drilling systems CNC

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double  ...

REMS ADM 96 Facing and Centering Machine Producer Rems Werk, Germany workpiece diameter - max. 8 - 50 mm workpiece length 5 - 500 mm spindle speed 100 - 1000 U/min workpiece diameter - max. Ø 50 / solid material mm workpiece diameter - min. Ø 8 / solid material mm workpiece diameter - max. Ø 70 / pipe mm workpiece diameter - min. Ø 8 / pipe mm wall strength 1 - 10 mm centre height 300 mm spindle hollow Ø 90 mm cut-off length with swivable stop min/max. 5 - 500 mm total power requirement ca. 25 kW dimension machine approx.LxWxH 5.,8 x 1,5 x 1,7 m dimensions electric cabinet 1300x450x1950 mm Feeding system

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

REM SC 53 Vertical Turning Lathe with Fanuc CNC Control. Technical Data: - Double Column / Double Heads lathe - Max. swing diameter: 5300mm - Max. turning height: 2270mm - Table diameter: 4700 mm - Load capacity: 25000 kg

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50

TOTAL LENGTH: 53798 MM, WIDTH: 10500 MM, HEIGHT: 10830 MM; CASSETTE INNER DIM.: 7500x1000x265 MM - L x W x H MAX. PROFILE LENGTH: 7500 MM, NO. OF CASSETTE PLACES: 294, DRVING SPEED: 100 M/MIN. LIFTING SPEED: 60 M/MIN.,

Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel grinding machine steels; oscillating grinding machine Producers: REMA Type: SNS 07 Rpm: 1450 / 2900 RPM. 2-speed motor Left and right rotation Connection: 380V / 16A Power: 0.6 / 0.73 KW Wheel size: 175 / 20 mm Fully functional without coolant pump

Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Double grinding bracket grinding machine Rema DS40/400 Large double grinder Manufacturer Rema Type DS 40 /400 Grinding wheel diameter 400mm Speed 1,450 rpm Main Star Triangle Switch Notaus

Our range also includes the SMG73 polishing grinding machine, which provides a powerful solution for grinding and polishing various materials such as wood, metal and plastics. The machine has a size of 1.75 m length, 0.75 m width and 0.73 m height and a 5.5 hp engine with a power supply of 380 volts. The spindle speed can be adjusted in three stages of 1400, 1700 and 2200 rpm. Thanks to its robust design and high-quality workmanship, the SMG73 is a durable and reliable investment for anyone who needs a powerful grinding and polishing machine. We offer fast delivery directly to your home so you can start working quickly and easily. Contact us today for more information or to place your order. ---------------------------------------------------------------------- ---------------------- Our range also includes the SMG73 polishing and grinding machine, which provides a powerful solu ...

Steel grinding machine Offer number: 20064 Make: REMA Type: DS 12 ST Machine Number: 108267 Built: 1988 Technical data: - Grinding wheel diameter approx. 125 mm - 2 disc speeds 1450 / 2200 rpm - Right, - Left-hand run - tilting fixed support table ATF 340 x 150 mm - Support table -5° to +15° tiltable - Lighting - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control

The machine is 2x Available! Steel grinding machine Make Rema Type DS12/ST with suction