Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 153961588
New in: 1996

used

check Seller: Industrialbay
Location: 23801 Calolziocorte Land-it

add to watchlist

OKUMA MX 45 VAE TECHNICAL SPECIFICATIONS CNC model Okuma OSP Cnc version OSP 700 M Tool mount BT 40 Spindle power 11Kw Kw Number of Spindle Revolutions 7000 Tool number 30 X-axis travel 762 mm Y-axis travel 460 mm Z-axis travel 450 mm Rapid advances linear axes X Y Z 30 30 24 m/min Table dimensions 1000x460 mm Roller guides High cooling pressure Pressure value 15 bar System with external tank with filter yes Dredging chip evacuator

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 22.08.2024 add to watchlist
approved
dealer
item-No.: 164820122
New in: 2001

used

check Seller: Industrialbay
Location: 23801 Calolziocorte Land-it

add to watchlist

OKUMA MX 45 VAE ::TECHNICAL SPECIFICATIONS::: CNC Model: Okuma OSP CNC Version: OSP 700 M Tool holder: BT 40 Spindle power: 11KwKw Number of spindle speeds: 7000 Number of tools: 30 X-axis travel: 762mm Y-axis travel: 460mm Z-axis travel: 450mm Fast feeds linear axes X Y Z: 30 30 24m/min Table dimensions: 1000x460mm Guides: roller High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Presetting: yes Machine equipment: Renishaw probe :::D DIMENSIONS AND WEIGHT::: Length: 4000mm Width: 3000mm Height: 3000mm Weight: 5000Kg

Category: 101 boring mills and machining centers
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 163960772

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 1000 mm Table width: 460 mm Longitudinal X: 762 mm Cross Y: 460 mm Vertical Z: 460 mm Positions ATC: 32   Positions APC: 0   CNC Brand: Okuma CNC Model: OSP-U100M 3-axis CNC machine (VMC)Okuma - MB-46VA MACH-ID 8708 Make: Okuma Type: MB-46VA Control: OSP-U100M Year: 2004 X - Travel762 mm Y - Travel460 mm Z - Travel460 mm Table Length1000 mm Table Width460 mm Table load800 Feed rate X-Axis40000 mm/min. Feed rate Y-Axis40000 mm/min. Feed rate Z-Axis32000 mm/min. Spindle Taper40 ISO/Bt/Mk Power on spindle11 kW Speeds / ranges8000 Rpm ATC / revolver32 Coolant through spindle / Bar20 Number of controlled axis3 Chip conveyorYes Coolantsystem

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982076
New in: 2005

used

check Seller: GINDUMAC GmbH
Location: Land-it

add to watchlist

This OKUMA MB-46VAE Vertical Machining Centre was manufactured in 2005. It comes with a OKUMA CNC OSP-E100M control unit and a spindle speed of 8,000 rpm. It has 3 axis (X = 762 mm / Y = 460 mm / Z = 460 mm) and has a workspace of 1000 x 460 mm. The tool holder is BT40 (N laying tools 32).

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982280
New in: 2001

used

check Seller: GINDUMAC GmbH
Location: Land-dk

add to watchlist

This 4-axis Okuma MX-45 VAE vertical machining center was manufactured in 2001. It features a table size of 1000 x 430 mm, X-axis travel of 762 mm, Y-axis travel of 460 mm, Z-axis travel of 450 mm, and a BT40 spindle with 7000 rpm. It also includes a 50-pot chain magazine and a high-pressure coolant system. For more information about this vertical machining center, please reach out to us.

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982550
New in: 2014

used

check Seller: GINDUMAC GmbH
Location: Land-hu

add to watchlist

This OKUMA Genos M560R-V Vertical Machining center was manufactured in the year 2014 in Taiwan and has 5800 production hours. It is equipped with an OKUMA OSP-P300M-R control unit. The machine has a spindle speed of 12000 rpm.

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982551
New in: 2003

used

check Seller: GINDUMAC GmbH
Location: Land-it

add to watchlist

This OKUMA MB 56-VA Vertical Machining center was manufactured in the year 2003. It is equipped with an OKUMA OSP U100 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

Category: 102 lathes / CNC Turning Centers
Latest update: 04.09.2024 add to watchlist
approved
dealer
item-No.: 164005801
New in: 2021

used

check Seller: Evelin of America Corporation
Location: Land-jp

add to watchlist

CNC Lathe OKUMA LU3000EX Year 2021 Main features. OSP-P300LA( Easy program advance D) 8’ Hallow Chuck Max length 600 Touch Center Up turret V-12/Below turret:V-8 Tailstock Steady rest Chip conveyor High pressure coolant Mist collector

Category: 102 lathes / CNC Turning Centers
Latest update: 21.05.2024 add to watchlist
approved
dealer
item-No.: 164124819
New in: 2002

used

Location: Land-de
Price: 54.900 € add to watchlist

A 9-axis CNC turning center from the manufacturer Okuma is offered here. The machine is in good condition and can be viewed and tested. Dnh7hb Make: Okuma Type: MacTurn 250 W Year of Make: 2002 Control: OSP-U100L

Category: 102 lathes / CNC Turning Centers
Latest update: 05.09.2024 add to watchlist
item-No.: 164173901
New in: 2012

used

Seller: AUTOMOTIVE MACHINE TOOL LIMITED
Location: Land-uk
Price: 26.000 € add to watchlist

Okuma OSP-200LA With Machining Navi L-G * Spare M-Codes, 4-Sets Pitch Error Compensation * Feed Hold During Threading Thread Start Point Offset *Helical Cutting * Spindle Synchronized Tapping Variable Spindle Speed Thread * Auto Tow-along Tailstock * LNS/AutoBlock Model SLU-Z-2 .32" To 3.98" Lower Turret Mount, Allows For Turret Index * Hydraulic Valve Package * Manual Touchsetter * Chuck High/Low Pressure * Losma Mist Collector *Live Tool Package (2) Side Face Mill/Drill, (2) End Face Mill/Drill * 10" Kitagawa 3-Jaw 40MM Bore * Enomoto Chip Coveyor & Coolant Tank

Category: 102 lathes / CNC Turning Centers
Latest update: 26.09.2024 add to watchlist
approved
dealer
item-No.: 164278891
New in: 2018

used

check Seller: TÖRNER CNC Maschinen
Location: 65193 Wiesbaden Land-de

add to watchlist

OKUMA MULTUS U4000 1SW 1500 Mfg. Year 2016, Installed 2018 OSP P300S control Movements: X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,600 mm W-axis: 1,554 mm B-axis: -30° to +210° max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Big Bore sub spindlel 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Milling spindle 22 kW, max. speed: 12,000 rpm Full B-axis Tool magazine for 80 tools High accuracy option C-axis on main and sub spindle Hydraulic steady rest, SMW Autoblok K4 - Clamping range: 30-245 mm Preparation for Multitool Renishaw System, RMP60 probe Renishaw TRS2 Tool Breakage detection swarf conveyor Mayfran MT10 20 bar high pressure pump API Library 2 One-Touch IGF Advance M-D Kit Helical turning function Z-axis automatic zero point offset by touch sensor main and sub spindle C-axis automatic zero offs ...

Category: 102 lathes / CNC Turning Centers
Latest update: 26.09.2024 add to watchlist
approved
dealer
item-No.: 164278894
New in: 2011

used

check Seller: TÖRNER CNC Maschinen
Location: 65193 Wiesbaden Land-de

add to watchlist

OSP-P200L, One-Touch IGF-M-D Max. turning diameter: 350 mm Max. swing diameter over bed: 550 mm Distance between spindle: 1,200 mm Movements: X1: 270 mm X2: 230 mm Y1: 160 mm Z1: 930 mm Z2: 920 mm W: 940 mm Main and sub spindle max. speed: 3.800 rpm Main and sub spindle max. torque: 420 Nm 2 x 12-Station Turret 2 x 12 driven tool stations Power output Milldrive 7 kW Driven toools max. speed: 4.500 rpm Swarf conveyor

Category: 102 lathes / CNC Turning Centers
Latest update: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164337334
New in: 2023

used

check Seller: Aloysius Garwels Maschinenbau GmbH
Location: Land-de

add to watchlist

CNC Lathe Okuma Genos L250II-e Demonstration Machine Control: OSP P-300LA-e - Turning length: 290 mm - Turning diameter: 220 mm - Direct recording - Tool turret with 12 positions - Tool calibration/touchsetter Equipment: Hollow clamping device with Ø 210 chuck and bore in the drawbar Ø 52 with each 1 set of hard and soft top jaws Transformer Conveyor Coolant pump

Category: 102 lathes / CNC Turning Centers
Latest update: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164337336
New in: 2022

used

check Seller: Aloysius Garwels Maschinenbau GmbH
Location: Land-de

add to watchlist

CNC Lathe Okuma LB 3000 EX II Demonstration Machine Control: OSP-300LA Turning length: 1,000 mm Turning diameter: 340 mm Rapid traverse X-axis 25 m/min Z-axis 30 m/min Speed: 45 - 5,000 rpm Tool turret V12 (driven) Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck Kitagawa Ø 254 mm - Hollow spindle Ø 70mm - NC tailstock - Parts catcher

Category: 102 lathes / CNC Turning Centers
Latest update: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164337338
New in: 2023

used

check Seller: Aloysius Garwels Maschinenbau GmbH
Location: 49757 Werlte Land-de

add to watchlist

CNC lathe Okuma LU 3000 M2SC 1000 / Demonstration machine Control: OSP-P300LA Spindle hours: 50 h Turning length: 1,000 mm Turning diameter: 340 mm Speed: 5 - 5,000 rpm Tool: VDI 40 2 Tool Turrets A-turret: 12 tool positions / all positions driven B-turret: 8 tool positions Tailstock Conveyor 3-jaw chuck Kitagawa B210 Touchsetter One Touch IGF Handwheel on the control panel

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164981999
New in: 2006

used

check Seller: GINDUMAC GmbH
Location: Land-es

add to watchlist

This OKUMA MA-600HB Horizontal Machining Center was manufactured in the year 2006 in Japan. The machine has a spindle speed of 60-5000 rpm and has 4 axis.

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982104
New in: 2007

used

check Seller: GINDUMAC GmbH
Location: Land-it

add to watchlist

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982297
New in: 2006

used

check Seller: GINDUMAC GmbH
Location: Land-es

add to watchlist

This OKUMA MA-400HA Horizontal Machining center was made in 2006. It has 4 axis.

Category: 2500 miscellaneous
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 164982421
New in: 1997

used

check Seller: GINDUMAC GmbH
Location: Land-es

add to watchlist

This Okuma MX-50HB Horizontal Machining center was made in 1997 in Japan. It is controlled by an Okuma OSP700M control unit and has 3 axis. The machine has a spindle speed of 50-10000 rpm.

Category: 101 boring mills and machining centers
Latest update: 31.10.2024 add to watchlist
item-No.: 164834542
New in: 2002

used

Seller: Exapro
Location: Land-tr
Price: 47.500 € add to watchlist

Okuma MB 56 VA Vertical Machining Center Control Unit : OSP U100M X/Y/Z : 1050 mm / 560 mm / 460 mm Machine is in good working condition

Category: 101 boring mills and machining centers
Latest update: 31.10.2024 add to watchlist
item-No.: 165036695

used

Seller: Exapro
Location: Land-tr
Price: 26.000 € add to watchlist

Okuma Euro Center V50 Vertical Machining Center X : 1020 mm Y: 510 mm Z : 525 mm

Category: 101 boring mills and machining centers
Latest update: 31.10.2024 add to watchlist
item-No.: 165442573

used

Seller: Exapro
Location: Land-pl
Price: 21.000 € add to watchlist

Machine damaged, electrospindle failure Condition Damaged Model MB-66VA

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 29.10.2024 add to watchlist
item-No.: 159466657
New in: 2018

used

Location: Land-cz

add to watchlist

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

Category: 102 lathes
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 160723512

used

Location: Land-nl

add to watchlist

Turning diameter: 900 mm Turning height: 900 mm Chuck diameter: 800 mm Number of chucks: 1   CNC Brand: _Unknown / Other CNC Model: OSP-P200L Max. turning Ø:            900mm Table  Ø:                  800mm Horizontal movement support:900mm ATC / revolver:            12 Speeds / ranges:           2000Rpm Power:                     30kW Length:                    5200mm Width:                     3500mm Height:                    3400mm Weight:                    14000kg

Category: 102 lathes
Latest update: 31.10.2024 add to watchlist
approved
dealer
item-No.: 161044187

used

Location: Land-nl

add to watchlist

Turning diameter: 280 mm Turning height: 210 mm Chuck diameter: 210 mm Number of chucks: 1   CNC Brand: Okuma CNC Model: OSP-P200L X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm  In feed table Out feed table Package jaws Package tool holders  Chip conveyor Coolant system 9 Bar Grundfos Max. turning Ø:280mm Table  Ø:      210mm ATC / revolver:12 Speeds / ranges:4000Rpm C-Axis:        360000°  

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
OKUMA 3rd category level
 
RESALE used machinery 25 years online