used OEMME Pneumatic Bench Type Presses

- Working pressure: min 6 - max. 7 bar - Machine weight: 170 kg - Space requirement (W x D x H): 0.55 x 0.55 x 1.4 m - Condition: very good Details for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10 from vocational school, was hardly in use, as good as new

Description: Machine complete with undercarriage Pickup of goods only by tractor truck (with maximum 7-meter box/trailer) or van. No semi-trailer trucks (with body more than 7 meters) Approx. Onsite Dimension. (l x w x h): 400 x 600 x 1,400 mm, weight approx.: 120 kg

Pneumatic press with foot-tripping

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

Table drill, table drilling machine ALZMETALL type AX 3 T Fabr. No. 3826 Year of construction 1983 Drilling capacity 30 mm Spindle holder MK 3 - long quill Spindle speed 250 - 1600 rpm 5 steps projection 250 / 290 mm Pinol stroke 120 mm Table size 400 x 300 mm Distance spindle-table top max. 700 mm Column diameter 115 mm Motor power 0.75 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 5 V-belt stages - Drill head height adjustment via hand crank approx. 450 mm (column extends downwards through the table top) - Emergency stop button quick-change drill chuck ALBRECHT 1-13 mm Space requirement L x W x H 900 x 600 x 1400 mm Weight 185 kg good condition; used

Pneumatic measuring and test bench for apprenticeship training, mobile FESTO PNEUMATICS Working surface: 1170 x 575 mm Working height: approx. 900 mm 3x Insertion: 600 x 500 mm ( depth x width ) 2x Magnetic board: 850 x 1550 mm ( height x width ) Compressed air boiler: approx. 10 l case with accessories 4x swivel castor without brake used, tested ! Dimensions: 1370 x 720 x 1940 mm

Description: tipping pneumatic bench for glass , processing. 0-90 degrees , with extensions and accessories Approx. Onsite Dimension. (l x w x h): 1,400 x 1,600 x 1,200 mm, weight approx.: 200 kg

Technical data Pressure: 3 to Execution: number of columns: 2 Machine frame: fixed Fixed table: length: 300 mm Width: 300 mm Die from the middle of the slide to the support: 40 mm Number of strokes: from: 230 s/min Fixed stroke: 30 mm Voltage 50 Hz 3x: 380 Volt Power: 0.5 HP Machine´s weight about: 160 kg Overall dimensions machine: Length: 700 mm Width: 700 mm Height: 1500 mm Various accessories: Foot pedal base-mounted type:

Capacity: 20 t Stroke: 1000 mm Distance column/center (Throat): 100 mm Distance between column 2730 mm Hight under roof 2100 mm Table Length2500 X 2000 mm Ram stroke2100 mm Approche speed80 mm/min. Working speed8 mm/min. Return speed50 mm/min. 

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 * 220 mm -Machine table made of aluminium profiles and PA plate 600 * 600 * 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Pneumatic pin press for printed circuit boards

Pneumatic pin press for printed circuit boards

Pneumatic Press machine #5412 Two cylinders (Upper - lower) Overall dimensions: 700 x 850 x 2300 mm Working space dimension: 500 x 500 x 500 mm Upper stroke: 280 mm Lower stroke: 100 mm

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

Technical data Pressure: 4.5 kN Table surface: Length: 185 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 400 mm Width: 250 mm Height: 730 mm

Technical data Pressure: 4.5 kN Table surface: Length: 170 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 380 mm Width: 300 mm Height: 700 mm

Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

RUIAN KODA MACHINERY pneumatic press was manufactured in 2020 in China. Operating with a maximum press force of 3 tonnes, the machine was part of a production line where it made rips for foil gloves. The pneumatic press allows for easy and quick replacement of punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the punch press RUIAN KODA MACHINERY - maximum press force: 3 t - working space (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - press weight: 200 kg

RUIAN KODA MACHINERY punch press, built in China in 2020, was used in a production line to create film gloves rips. The machine has 3 tonnes of press force and the ability to change punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the RUIAN KODA MACHINERY pneumatic press - pressing force: 3 t - workspace (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - total weight of the press: 200 kg

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)