We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system
used
This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.
used
This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.
used
Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499
Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air
Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air
Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air
Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air
used
We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.
used
Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
used
Preform Weight (Max): 30,5 g // Neck Type: PCO
used
The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm
used
Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (*=standard) mm M12-M16* Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes
used
Machine: NETSTAL 550 T 5500-4200 EVOS Year: 2010 Number of hours: 7000H Closing Closing force: 550 T Opening stroke: 900 mm Between columns: 1020 x 920 mm Mini / maxi mold: 600-1050 mm Max distance between plates: 1950 mm Injection: Screw diameter: 80 mm Screw length: 27 D cm3: 1608 Bars: 2400 General: Engine power: 132 KW Heating power: 94 KW Closing weight: 32 tonnes Injection weight: 8 tonnes Dimensions length: 9.83 m Dimensions width: 2.54 m Dimensions height: 2.35 m Options: Cores: 2 Robot interface: yes E 67 Bi metal: yes 12 pneumatic controls 16 hot runners Colorator interface; bi-material interface; compression injection interface Graph track Power master type lamination
used
Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (*=standard) mm M16-M20* Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes
used
Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (*=standard) mm M16-M20* Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes
used
Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48
used
Netstal SynErgy 1500-600 injection molding machine year of production 2003 – 45kW engine – maximum clamping force 1500kN – injection unit 600 – screw diameter 50mm – injection volume 353 cc – injection weight 339 g – injection pressure 1890 bar – hydraulic ejector on the movable plate – hydraulic core on the movable plate – hydraulic core on a fixed plate – two air valves – mold height 250-550mm – mold opening stroke 0-450mm – spacing between columns 460 X 460 mm – weight of the machine 11,200 kg
used
Clamping force [kN] 3000 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400-1100 Maximum opening width [mm] 700 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680.9 Injection pressure [bar] 2100 Centering ring diameter 120 / 160 mm Core movable plate - 2 pcs Air valve - 8 pieces Euromap 12 Oil tank 445 ltr
used
Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890
used
Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 1060 x 1120 Clearance between columns (hxv) [mm] 720 x 720 min./ max. mold height [mm] 400 - 750 Maximum opening width [mm] 1100 injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 680 Injection pressure [bar] 2100
used
Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5
used
Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5
used
Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599