We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,
used
roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately
Working width 1000 mm Still in operation: Yes Available: immediately
working width 1000 mm Still in operation: Yes Available: sofort
used
Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD!!
Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.
used
With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm
used
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
used
Manufacturer: SM Engineering Type: KMB Year of construction: 1998 Working width: 495 mm Max. roll diameter: 500 mm Dimensions: 1600 x 2000 x 1800 mm
used
Manufacturer: SM Engineering AG Type: KBM Year of construction: 1998 Working width 495 mm Overall size: 1600 x 2000 x 1800 mm Electrical data: 3x400 V; 50 Hertz Operating pressure: 6 bar The machine is suitable for cutting off various films and other materials.
used
Slitter rewinder for paper and foil Manufacturer = Titanium, Type SR7 Max. material width = 1350 mm Max. working width = 1300 mm max. speed = 400 m/min Diameter unwinder = max. 1000 mm Rewinder diameter = max. 800 mm 76 / 152 mm sleeve With pressure roller Friction Waves 76 / 152 Cutting system = paper cut Upgrade 2007 with automatic knife adjustment (Newtec) Motor with electric brakes Side edge control With adhesive table Roll removal device
used
Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW
used
used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table
used
Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.
used
Karl Schnell emulsifier Power: 9 kW
used
K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.
used
Treif Portion cutter Model: 1943 1998. Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C.
used
K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.
used
Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.
used
Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.
used
K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.
used
Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.
used
MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.