We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used
used
used
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
- Radial fan GRUSS - Type SP 300 - Motor 11 kW - 2900 rpm Lxzqt - Suction side Round D= 300 mm - Starting side rectangle 300 x 210 mm
used
Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
- Motor 11 kW - Connection DM. 300 mm - Start-up control Available from January 2024!
used
Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Köttermann suction table with liquid drain. Sold as part of a production shutdown. Specifications 16Amp, 80 Watt. 230 / 400 volts. 50hz Dimensions working space 1.17m x 0.61m x 1.15m H Opening door 0.9 x 0.845m Total dimensions HxWxD 2,80x1,50x0,90 m Inhrud9 Weight 220 kg, Ceramic work surface with funnel basin, media connection: electricity, waste water, Mistakes not ruled out
used
A suction cabinet from BDK is sold. The cabinet can be tested under power. The cupboard is in very good condition. The windshield was damaged during transport at the front. Techn Data: Hosch Filter Supply Air: MXLA- GW 1120*500*90mm Hosch Filter Exhaust Air: MXA-GW 457mm*457mm*90mm Power consumption 0.63KW El. Connection: 230V AC, 50 Hz Hedging 16A on site Lighting 30 watts User manual available
used
Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in ...
used
Suction blowers 11 kW approx. 1200 mm direct drive
used
Te Coop: Westfalia Centrifugaalpomp type MZB 10 6 fans. Seal on watercooling op flens 1 P11 96 PD 6 bar. Machine no. 1713-935 Max type 1700 rotation/minFlender ATB-Loher Electorpomp ANGa 132MB 06D 4 KW 220 / 380 V 16/9.3 A
used
TECHNICAL DATA: Main motor power KW: 90
used
used
Suction blower MTV 6040 D Masch. Item no. 708,438 Motor power 11 kW 1450 rpm ø approx. 700 mm Year of construction 1982 The machine is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
new
EBM-PAPST S3G710 CG 98-07 Brand:EBM-PAPST Type:S3G710 CG 98-07 Stock number:M22-7107 Cooling capacity:0.0001 kW Number of fans:1 Voltage:400 Volts Power consumption:1,9 A Motor power:1,2 kW Dimensions:Ø 710 mm Year:2022 New/unused Number in stock:50 piece(s) Price: Quotation request Description: New unused EBM Papst E.C. fans (1010 rpm). Visit our website: used-refrigeration
used
Heatsink with two fans PAPST TYPE 4650 N 2 Fan 230 V 19 W Dimensions: 430 x 410 x 210 mm
used
Cellar SMM 012.0 Extraction blowers Diameter 120/120mm Air flow rate 700 Nm³/h 0.55kW
used
Keller SMM 016,0 Extraction blowers Diameter 160/160mm Air flow rate 1200 Nm³/h 1.5kW
used
Cellar Extraction blowers 1.8kW
used
used
1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...
used
PLASMA Suction and filtration system FILTERBLOC - TFK PL Series Special central suction and filter system for plasma smoke when burning and cutting the FILTERBLOC TFK PL series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 engine power 5.5/7.5/11 KW air volume 4000/5500/6200 m3/h filter area 124/186/248 m2 Dusting area 4x/6x/8x 84 liters Automatic jet cleaning system with welding smoke class W3 24 months warranty The price information refers to the TFK PL 40 naehere information on request; ready to use
used
Laser smoke extraction and filter systems FILTERBLOC TFK LA Series Special Central suction and filter systems for laser smoke of the FILTERBLOC TFK LA series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE Drawing. FILTERBLOC LASER 30/40/60 engine power 3 KW/4KW/5.5KW air volume 2500/4000/4500 m3/h filter flat 93/124/186 m2 Dusting area 3 x 84 liters/4 x 84 liters automatic jet cleaning System with welding smoke class W3 24 months warranty The price information refers to the TKF Laser 30 naehere information on request; ready for immediate use
used
Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW