used KASTO Fully Automatic Bandsaws

Manufacturer : Kasto Type : Verto A2 Year of construction : 2015 Control : Basic-Control Kasto Location : from the beginning of March 2024 from warehouse Sweden Easy-to-use Basic Control control Frequency-controlled, infinitely variable saw drive Infinitely variable, hydraulic saw feed Two hydraulic horizontal clamping vices Electromotive material feed via ball screw Specifications Cutting range 90° round. :260 mm Cutting range 90° flat (W x H): 320 x 260 mm Cutting range 90° square: 260 x 260 mm Shortest remnant length: 6 mm Smallest saw diameter: 10 mm Band saw dimensions: 3,180 x 27 x 0.9 mm Cutting speeds: 12-120 m/min Material support height: 950 mm Weight. 1,360 kg Dimensions. 2,365 x 2,250 x 1,767 mm (without roller conveyor) Automatic Band Saw with Reduced Volume Other equipment - Automatic zero positioning of the first saw section - Coolant ...

cutting diameter: 520 mm saw band length: 6096 mm cutting width: 1,3 mm cutting range: 520x620 mm total power requirement: 6,578 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,3 x 2,2 x 2,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection  ...

weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972

Column-guided horizontal automatic band saw make KASTO type HBA 340 AUTechnical specifications:Cutting diameter: 340 mmCutting area 90 °: 340 x 380 mmSaw band length: 5334 x 32 x 1.06 mmTable height: 700 mmSpeed range: 20 - 130 m / min.Drive power: 11 kWWeight approx: 2.1 tDimensions approx .: 2200 x 2600 x 2000 mmWith- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hacksaw, hacksaw machine, hacksaw machine -Manufacturer: Kasto, Hydr. hacksaw machine -Max. Cutting height: approx. 310 mm -Max. Cutting width: approx. 340 mm -Saw blade: length approx. 615 mm -Roller conveyor length: 1500 mm -Dimensions machine: 2300/1800/H1300 mm -Weight: 1500kg

Band sawing machine Kasto HBA 520 AU saw area 350 x 350 mm, table load 7000 kg. Machine immediately available and available. Free truck loading.

Band sawing machine with sawing area 650 x 650 mm, table load 8000 kg. Machine immediately available and available. Free truck loading.

cutting diameter: 1020 mm saw band length: 11.430 x 80 x 1,6 mm cutting width: 1,6 mm cutting range: 1020x1260 mm Control: CNC cutting speed: 15-190 m/min power capacity: 11 kW table load: 20 t total power requirement: 20 kW weight of the machine ca.: 21,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminum cross-cut saw, aluminum circular saw, aluminum semi-automatic circular saw, cross-cut saw, aluminum metal circular saw, light metal circular saw, metal cutting machine -Manufacturer: KASTO, semi-automatic under-table miter saw machine with roller conveyor -Type: KASTOalu U 14 -Saw blade: Ø 400 mm, 2,800 rpm -Saw feed: Hydropneumatic, infinitely adjustable saw feed with rapid return -Swivel range: 180° infinitely adjustable miter device -Cutting area 90°: 200x80 mm / 125x125 mm / 140 mm -Cutting area 45°: 140x80 mm / 110x110 mm / 130 mm -Coolant device: minimum quantity lubrication system -Drive: 1.8 kW -Clamping device: Two vertical and two horizontal clamping elements -Roller conveyor: 3000/520/H950 mm / 2000/470/H950 mm -Dimension saw: 700/1100/H1370 mm -Total weight: 298 kg

- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition

material width: 630 mm material height: 530 mm cutting range: 530 mm saw band length: 7.675 mm width of saw-band: 54 mm length: 2.225 m length in width: 5215 mm : 6610 103 164 weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Cutting diameter around 260 mm Cutting diameter square 260 mm Saw blade length 4115 x 32 x 0.9 mm Belt speed 15 - 125 m/min NC control Total power requirement 6.5 kW Machine weight approx. 2.0 t Dimensions L x W x H 2.1 x 2.1 x 2.0 m including chip conveyor weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 2,000 mm

cutting diameter:520 mm saw band length:7239 x 50 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min total power requirement:9,5 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3,5 x 2,2 x 2,1 m - Multifeed device - infeed roller stand - chip conveyor - automatic operation

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Hydr. hacksaw Kasto EBS 320 U manufacturer: Kasto type: EBS 320 U mach.-Nr.: 273463 year of construction: ??? comm.-Nr.: 3990297/509 stock-Nr.: 1836 +++ Regular Price: 3.650,- € > Reduced Price: 1.825,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) sawing area: Ø 320 mm oder 320 x 300 mm saw blade dimensions: 575 x 45 x 2,5 mm 4 hub speeds: 40 / 57 / 80 / 115 hubs/min. drive power: 3,5 kW weight: ca. 750 kg standing area: B 1,80 x T 0,80 x H 1,10 m machine color: grauweiß / rot Features * 4 hub speeds * cutting pressure infinitely adjustable * closed hydraulic system *  ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id     5161 MAKE          KASTO Germany TYPE            Twin A4 YOP              2001 SPECIFICATIONS Bandsaw / Circelblade / Automat       Automat Angle L / R Degrees      90 Gr. Cutting capacity 90 ˚ Ø   400 mm Cuttting capacity 90 ˚ Flatt       400 x 400 mm blade dimensions          5090 x 41 x 1,3 mm roller conveyor / push up / measuring    Roller conveyor      Cutting speed M/min        20 - 110 M/min DIMENSIONS Length        2500 mm  ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   5002 MAKE        Kasto Germany TYPE          Twin A4 YOP             2003 SPECIFICATIONS Bandsaw / Circelblade / Automat     Automat Angle L / R Degrees      90 Gr Cutting capacity     90 ˚ Ø    400 mm Cuttting capacity 90 ˚ Flatt        400 x 400 mm blade dimensions     5700 x 41 x 1,3 mm Cutting speed M/min        20 - 110 M/min DIMENSIONS Length          3000 mm Width            2700 mm Height           22 ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3509 MAKE   Kasto Germany TYPE   Twin A4 YEAR  2006 SPECIFICATIONS Bandsaw / Circelblade / Automat  Bandsaw Angle L / R Degrees   0 Gr / Straight cutting Cutting capacity 90 ˚ Ø  400 mm Cuttting capacity 90 ˚ Flatt  400 x 400 mm blade dimensions5700 x 41 x 1.3 mm Cutting speed M/min   20 - 110 M/min DIMENSIONS Length   2980 mm Width   2700 mm Height  2200 mm

Cutting capacity 90 ° round: 320 mm cutting capacity at 90 ° flat: 320 x 245 mm cutting capacity in MITRE at 45°: 240 mm blade dimensions: 550 x 45 x 2 mm stroke speed: 43 116 RPM elect. Supply: 380 V, approx. 2.5 kW space: 1520 x 900 x 1000/1400 mm weight: 545 kg

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg

Metal miter circular saw make KASTO type GKS 400 PMachine -No: 3111101003, built in 1995Saw blade dimensions: 400 mmCutting area 90 ° round: 130 mmCutting area 90 ° flat: 260 x 80 mmCutting area 90 ° square: 120 x 120 mmCutting area 45 ° round: 130 mmCutting area 45 ° flat: 180 x 80 mmCutting area 45 ° square: 110 x 110 mmCutting area 60 ° round: 90 mmCutting area 60 ° flat: 130 x 80 mmCutting area 60 ° square: 90 x 90 mmCutting speed: 11/22 m / min.Drive power: 5 kWWeight: 1080 kgOutside dimensions approx: 1250 x 1205 x 1900 mmWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic ironing machine make KASTO type EBS 340 AUMasch. -No: 104001146858367, year of construction 1981Technical specifications:Cutting area round: 340 mmCutting area flat: 340 x 280 mmCutting area square: 325 x 325 mmNormal feed length up to: 600 mmMultiple feed up to: 1800 mm6 stroke rates: 33 - 104 H / min6 cutting speeds: 13 - 40 m / minSaw blade dimensions: 600 x 52 x 2.5 mmDrive power: 6 kWDimensions: 2180 x 2110 x 1340 mmWith- Universal hydraulics- rapid traverse - lowering - device- Saw blade rupture protection- stepless clamping pressure regulationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic. Parallel cut hacksaw machine make KASTO type WBS 150/170Machine -No: 122 041 120369320 Year 1985Technical specifications:Cutting area round: 150 mmsquare: 150 x 150 mmrectangle: 150 x 170 mmin miter at 45 °: 100 mmSaw blade dimensions: 300 x 30 x 1.5 mm (bore 8.5)Working height: 695 mm2 stroke rates: 75/80 H / minDrive motor: 380 V, 0.75 kWDimensions: 800 x 800 x 1350 mmWeight approx. 170 kgColor: blue / whiteWith- Coolant device- Material vertical stress- Stepless oil-hydraulic cutting pressure control with lifting in idle stroke- Depth of cut can be determined by depth limit switch- rotating machine headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best  ...