We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.
used
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
used
Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm
used
Hydraulic Miter Metal Cold Circular Semiautomatic Saw Fabr. KALTENBACH Type KKS 401 HMachine -No: 112710 built in 1991Saw blade size: 375/400/425 mmCutting width max .: 5 mmCutting speed: 10/20 m / minCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 mmxa0xa0xa0 45 ° square: 110 x 110 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmSaw blade feed speed: 0 - 1200 mm / minDrive power: 1.7 / 2.6 kWOutside dimensions: 1170 x 1070 x 1960 mmWeight (machine only): 1350 kglittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...
used
Cold circular saw make KALTENBACH type KKS 350Fabr. -No: 22003, built around 1965Saw blade diameter: 350 mm2 saw blade speeds: 15 + 30 rpm2 cutting speeds: 16.5 / 33 m / minSaw cross section approx: 130 x 50 mmaround max. 80 mmClamping stroke max. : 45 mmExternal dimensions L x D x H: 1000 x 1200 x 1900 mmWeight approx: 1500 kgWith:- pneumatic workpiece clamping (holding down)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
NC-controlled fully automatic circular saw Fabr. KALTENBACH Type KKS 400 NA / FMAFabr. -Nr: 104427 Year 1984Saw blade diameter: 400 mmCutting area round: 130 mmCutting area square: 120 mmCutting area flat: 315 x 40 mmU-profiles: 240 x 85 mmU-profiles 45 °: 180 x 70 mmCutting speed: 13/25 m / minSaw blade feed speed: 10-1200 mmRapid return of the saw blade: 1500 mm / minDrive power: 3.2 / 4.1 kWExternal dimensions: 12000 x 2500 x 1850 mmWeight without flat magazine approx .: 1350 kgWith- Flat magazine for material output lengths 1500 - 6000 mm- NC control without screen- Restelager before roller conveyor for remnants 1500 - 6000 mm in lengthused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available ...
used
Automatic circular saw make KALTENBACH type KKS 400 NAMachine -No: 1700-02-044Technical specifications:Saw blade diameter: 400 mmCutting range 90 ° / 45 ° round: 130 mmCutting area 90 ° rectangle: 315 x 40/180 x 70 mmCutting area 90 ° U-iron: 240 x 85 mmCutting area 45 ° U-iron upright: 120 x 55 mmCutting speed: 10/14/20 - 15/21/30 m / minAutomatic feeder, cut length: 10 - 1000/2000 mmFeed speed: 6 - 12 m / min.Drive power: 3.7 / 4.5 kWHydraulic motor: 0.75 kWExternal dimensions approx .: 1800 x 1000 x 1200 mmWeight approx: 850 kgwith- automatic replenishment machine- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mach ...
used
Steel underfloor circular sawing and centering machine KALTENBACH type RKF 370Fabr. -No: 19 282Sawing area round: 130 mmSaw blade diameter: 370 mm3 cutting speeds hard / medium hard / soft steel: 11, 15, 23 m / minCoolant: waterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.
used
saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nominal current: 7.6A, voltage: 380V.
used
Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg.
used
Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible.
used
Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg
used
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
used
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
used
Kaltenbach KKS 400 Dia saw / abrasive - disk : 400 mm Sawclampspeeds: 30--260 m/min Length : 1040 mm Depth : 965 mm Height: 1650 mm Weight: 850 kg
used
voltage: 380 V stroke: . mm : . square: 1200-100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Semi-automatic aluminum cold circular saw with two speeds. Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 1420 / 2840 rpm Total power requirement 4.5 kW Machine weight approx. 0.6 t Dimensions L x W x H 1.1 x 0.9 x 1.8 m weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 900 x 1,800 mm
used
Description: Cold circular saw with: Saw blade diameter max. 350 mm Cutting area: around 110 mm Cutting area: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Space requirement approx. 0.8 x 1.0 x 1.85 m weight approx.: 480 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,000 x 1,850 mm
used
Description: Cold circular saw with - Semi-automatic - Miter on both sides - Coolant system - hydr. Workpiece clamping Saw blade diameter 400 mm Cutting diameter 130 mm Cutting speed 30 - 130 m/min Total power requirement 1.5 / 2.6 kW Machine weight approx. 0.55 t Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 550 kg
used
Cold circular saw, metal circular saw, mitre saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 1000 mm -Max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg
used
Description: Saw blade diameter 400 mm Cutting diameter 130 mm Stroke 150mm Profile size - max. 315 x 40 mm cutting speed 13, 25 m/min Total power requirement 2.6 + 1.5 kW weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 1,650 mm
used
Segment saw blade: 400mm x 4mm x 50mm. Working range: round material 90°/45°: 130mm, square material 90°/45°: 120mm/110mm, flat material 90°/45°: 305mm x 20mm/245mm x 30mm, U-profile upright 90°/45°: 120mm x 55mm, U-profile horizontal 90°/45°: 240mm x 85mm/180mm x 70mm. Cutting speed with saw blade 400mm in m/min: 13/26 or 10/20 or 15/30. Feed rate: 0-3300mm/min. Dimensions X/Y/Z: 800mm/1070mm/1780mm, weight: approx. 850kg. Available from June, 2024. Documentation available. On-site inspection is possible.