used JAGO Boring and Dowel machines

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Dowel drilling machine long hole drilling machine. HOFFMANN Dowel Fix Type: DBL C110 Built in 1995 Dowel drilling on 2 different levels Pneumatic height adjustment of the drilling unit incl. quick-change device for drill chucks. incl. drill chuck up to 20 mm incl. 8-fold gear drill chuck incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

CNC-controlled drilling, gluing and duebel insertion machine Also suitable for drilling furniture connectors due to 3 controlled axes A video of the running machine can be sent on request. Working width max. 1250mm, for double occupancy 600mm with pneumatic center stop 4 pneumatic workpiece clamps Horizontal drilling unit with 3 individually retrievable drills, motor power 1.5kW Vertical drilling unit with 3 individually retrievable drills, motor power 1.5kW X-axis, Y-axis, Z-axis cnc-controlled As a result, quick changes between different material thicknesses are possible. Dowel length 30 and 35mm, currently set to 8x30mm Vibrating conveyor for wooden dowels Glue monitoring Glue quantity electronically adjustable Glue feed via double diaphragm pump Beckhoff controller with Industrial PC and colour screen Programming via WoodWop 5.0, with variable programming Work li ...

Dowel drill Schleicher Type Partner 27/2 Specifications: • Year of construction: 1991 • Working width (mm): 900 • Number of drilling spindles: 27 • Pitch (mm): 32 • Drilling unit: swivelling • Motor power (kW): 1.9 • Space requirement L x W x H (mm): 1120 x 900 x 1150 • Weight (kg): 550

ORF Universal 5 Spindles

NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm * Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. * Pneumatic drill head shears * Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle * Head with quick-connect spindles (the quick-release buckets are a Zubehoer). * 5 quick-release buckets are standard. * 2 patented pneumatic pressure devices accident-protected. * 2 side connectors on th ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

Dowel drilling machine Biesse type Techno Logic Specifications: • Year of construction: 04/1994 • Working width (mm): 3200 • 7 supports from below: with 2 drilling units each • 2 top-down supports: with 2 drill units each • Drilling support: 1 right and 1 left horizontal

Model Forma two vertical drill beams 17 – spindly adjustable, 1 horizontal drill beam 17 – spindle mobile Sales on behalf of customers

Dowel drilling machine Schleicher Universal Drilling Machine Type BORFIX With swivel drill bar Drill gear with 9 drills 1.5 kW 2 pneumatic workpiece holders Drills from the top and back Cushion size 1000 mm x 530 mm Stop rail length 2000 mm Weight with pallet 185 kg Shipping Dimensions 1200 mm x 1020 mm x H 1700 mm

SCM drilling machine model TOP29: - 29-spindle head with quick coupling - Adjustable drilling 0-90° from upper vertical to horizontal - Motorized movement of the drilling head - 6-position drilling depth revolver - 4 pneumatic clamps to hold the pieces - complete with aluminium rails AVAILABILITY FROM APRIL 2024

Hole rowing machine DB 3 - 25 drill bits pitch 32 mm

Dowel drilling machine DORNBURG Type: DDBP incl. 5-fold gear drill chuck Rotatable drilling unit Support table height adjustable and swivel from -20° to +30°. Motor power 1.5 KW Pneumatic workpiece holder automatic pneumatic drill feed incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

SPECIFICATIONS: Number of drill bits: 29 - Quick release Drilling distance mm: 32 Pneumatic operation Vertical/horizontal tilt: 0°-90° Installed capacity: KW 2.2 04 Workpiece clamping hounds With angle drill

SPECIFICATIONS: Number of drill bits: 35 Drilling distance mm: 32 Vertical/horizontal swivel Installed capacity KW: 2,8 Quick release Pneumatic operation

Used dowel, row and fittings drilling machine Int. Art. Ref. m3512 Manufacturer: Gannomat Type Minette 010 Fully automatic pneumatic control with foot valve. Clamping-drilling-relaxing. T-drill head, 7+2 spindles, pitch 32 mm Machine can be swivelled by 90°, with locking. Drill hole depth 57 mm Total length = 0-27 mm Drill hole depth 77 mm Total length = 0-55 mm Shank diameter of the drill bits 10 mm Position adjustment 0-80 mm Clamping height of workpieces max. 80 mm Working height 850 mm Year of construction unknown Power 1.1 kW Spindle speed 3,000 rpm. Compressed air connection 6 bar With pictured accessories Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clar ...

Stegher FD Dowel Drill Brand: Stegher Type: FD Year of construction: 1995 M-No.: 35/12951 Control: Alfa-numeric, with pre-programmed drill cartridges Longitudinal and strin-side bores Length stops: Left and right digital stops for longitudinal drilling Lugs for left and right side holes with turret positioning Dowel dimensions: 6-16 mm Drilling depth: 80 mm Motor: 2.2 KW Compressed air: 6 bar Suction: ø80 mm