We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Key data: 730 mm, 630 mm, 12 A
Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading
used
EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...
used
Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm
used
new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min
used
X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate.
used
Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.
used
Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg
used
Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled
used
Year of manufacture 2000 generator 70 amps - multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z) 700 x 1350 x 500 mm Bowl (W x D x H) 1000 x 1600 x 550 mm work table (B x T) 900 x 1500 mm capacity 3000 kg accessories 10-speed pick-up linear changer CO2-Fe uerlöschanlage, cartridge filter system, programming station software MultiProg obsolete status, available from February 2018
used
CNC EDM machine make INGERSOLL type IC 112Fabr. -No: 571085 Year 1985Table surface: 700 x 440 mmLoad capacity: 1000 kgTravel X: 450 mmTravel Y: 350 mmTravel distance Z: 350 mmWorking head: 205 x 205 mmHead load: 600 kgErosion load limit: 400 kgPinole diameter: 120 mmclear width head - table: 300 - 650 mmDrive: servo-hydraulic.Work container size: 960 x 650 x 400 mmCapacity: 230 lFeed rate in 3 axes: 600 mm / minHydraulic capacity: 40 lOperating current: 35 ASupply voltage: 380 V, 50 HzConnected load: 5 kVADimensions L x W x H: 2885 x 2000 x 1950 mmWeight approx. 2200 kgVolume of flushing pump: 25 l / minDelivery volume of filling pump: 130 l / minTotal amount of dielectric: 400 lFilter area: 4 m / 2With- Control type M 60 D Rotron 3 T Heidenhain ME 102used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.T ...
used
CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions of the generator: 1950 x 2260 x 2900 mmWith- Generator M 60 DC 5 kVA- electrical meter f.d. Eroding the quill- Dialog DC-CNC planetary control PLT TVxa0xa0xa0(Dialog Color Graphic)- sep. Supply unit ...
used
Year of manufacture 2002 Generator 70 amps, multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z)) 525 x 400 x 450 mm Bowl (W x D x H) 750 x 650 x 420 mm workpiece clamping table (B x T) 730 x 630 mm electrode changer 20-fold pick-up plate changer accessories CO2-Feuerloeschanlag e, integr. Cartridge filter system status complete overhaul.
used
Control: Mitsubishi - 64 bit CNC Generator power: 70 amperes, multipulse Travel (X, Y, Z): 525 x 400 x 450 mm Working container (W x D x H): 750 x 650 x 420 mm (stroke tank) Work table (W x D): 730 x 630 mm Capacity: 1,000 kg Electrode changer: 30-fold pick-up plate magazine Accessories: - CO2 fire extinguishing system, - HSJ technology (High Speed Jump), - integr. Cartridge filter system, - MultiProg programming room software Status: outdated Warranty: - Price: On request
Year of construction: 2000 Generator: 70 Ampere - multipulse Control: Mitsubishi - 64 bit CNC Travel (X, Y, Z): 700 x 1350 x 500 mm Working container (W x D x H): 1000 x 1600 x 550 mm Work table (W x D): 900 x 1500 mm Load capacity: 3000 kg Electrode changer: 10-fold pick-up linear changer Accessories: - CO2 fire extinguishing system - Cartridge filter system Status: obsolete Price: on request
used
Hello - we have for sale an Ingersoll IG1000 Die sinking edm machine Table size 900x650 operating range X = 680 Y = 790 Z = 700 Maximum table load capacity = 2000kg
used
Description: Y-axis (with electrode change): 675 mm Carrying capacity: 1000 kg Integrated C-axis 1/min: 10/20 Working head: Max. Head load: 100 kg Max. Distance between tool carrier plate and worktable: 575 mm Electrode changing system: Pickup plate magazine Magazine slots: 20 Drive and measuring system: Drive type: digital AC servo motors Travel speed X/Y/Z: 2000 mm/min Digital display: 0.001 or 0.0001 selectable Total amount of dielectric: 400 liters x-motion: 525 mm, y-motion: 400 mm, z-motion: 375 mm, control: Multipulse, table surface area l x w : 730 x 630 mm, weight approx.: 4,800 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 2,150 x 2,550 mm
used
Description: machine number: 575158 control: Multipulse travels: X-axis: 550 mm Y-axis: 850 mm Z-axis: 450 mm table dimensions: 800 x 1100 mm max. table load: 2000 kg x-motion: 550 mm, y-motion: 850 mm, z-motion: 450 mm, control: Multipulse, table surface area l x w : 800x1100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,650 x 2,800 mm
used
Control Mitsubishi-32 bit CNC Generator power 70 amps, multipulse Trajectories (X, Y, Z) 550 x 850 x 450 mm Work container (B x T x H) 800 x 1100 x 480 mm (lift container) Work table (B x T) 760 x 1000 mm Carrying capacity 2,000 kg Electrode changer 20-fold pick-up plate magazine Accessories-CO2 fire extinguishing system -integr. Cartridge filtration system Status outdated Warranty- Price on request
used
This OPS Ingersoll Gantry 5000 Erosion machine was manufactured in the year 2002 in Germany and has 72500 erosion hours. The machine has an Erowa IMC Robot for changing electrodes and workpieces.
used
Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central ...
used
This INGERSOLL IG1300 PENTA (2017) Erosion machine was refurbished by PENTA in 2017. Operated by a BECKHOFF PENTA CNC Control it has 4-axes (X = 900mm / Y = 690 mm / Z = 550 mm / C = 360 degress). With table dimensions of 1150 x 950 mm it can operate with a table load of max. 4000 kg. It is still under power, in very good condition and can be inspected at any time.
used
Max. 12 bar, 110 m3/min, year 2001.