Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161190274
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 999 € add to watchlist

Suction nozzle diameter: 160mm; Nominal volume flow: 1300 m³/h; Scouting bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the like Particularly robust construction housing made of galvanised sheet steel Chip bins are powder-coated Paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag Extractors correspond to dust class L Basic units are pre-assembled in modular design For large systems, only short assembly times Top price-performance ratio Short installation times due to modular design SCOPE OF DELIVERY system body with mounted fan unit 1 - 6 chip bags ASA 11 - ASA 21 Extraction unit with plastic impeller ASA 31 - ASA 61 Extraction unit with metal impeller sta ...

Category: 505 other machinery for waste disposal and recycling / Extraction units
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 157853093

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 469 € add to watchlist

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161190263
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 1.199 € add to watchlist

Suction nozzle diameter: 260mm; Nominal volume flow: 7700 m³/h; Scout bag volume: 2 x 290 l; Filter cleaning: manual; Motor power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust) Extraction unit rotatable by 180 allows extraction to be guided from below or above Stable metal fan wheel Standard with high-quality chassis for better stability and easy manoeuvring Quick-release fasteners for filter and chip bag Fine filter bag double-woven

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161190268
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 479 € add to watchlist

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal volume flow: 1900 m³/h; Scout bag volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust) Extraction unit rotatable by 180 allows extraction guidance from below or above Stable metal fan wheel Standard with high-quality chassis for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double-woven

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Extraction Systems
Latest update: 12.03.2024 add to watchlist
item-No.: 162311000

used

Seller: ABDAX Klaus Beckmann Holzbearbeitungsmaschinen GmbH & Co. KG
Location: 32825 Blombe Land-de
Price: 275 € add to watchlist

Key data: 1 m²

Type ASA 2403 Airflow 36 cbm/min. Connection 400 V 50 Hz Motor 1.1 kW Speed 2,850 rpm Suction nozzle 1 x 120 mm, 1 x 100 mm Dimensions: 90 x 48 x 210 cm • For milling, planing and sawdust (not suitable for dust) • 180° rotatable suction unit allows suction to be guided from below or above • Sturdy metal fan wheel • Chassis as standard for better stability and easy manoeuvring • Quick-release fasteners for filter and chip bag • Fine filter bag double woven • Chip collection volume 110 l • Filter area 1.92 m²

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Extraction Systems
Latest update: 25.05.2024 add to watchlist
approved
dealer
item-No.: 163466207
New in: 2011

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de

add to watchlist

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution

Category: 209 other wood working machines / Extraction Systems
Latest update: 12.06.2024 add to watchlist
approved
dealer
item-No.: 164200546
New in: 2006

used

check Seller: Surplex GmbH
Location: Land-es
Price: used machinery auction RESALE 150 € add to watchlist

Description:  ,1 bag extraction system ,with wheels Outlet diameter: ,120 mm Single-phase main motor: 1.2 kW, Approx. Onsite Dimension. (l x w x h): 900 x 500 x 1,300 mm, weight approx.: 15 kg

Category: 202 milling machines / Spindle moulders
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 147045712
New in: 2017

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 6.490 € add to watchlist

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Category: 212 peripheral equipment (e.g. heating, conveying, drying) / Transportation belts
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 126359851

new

check Seller: WEIBERT maschinen
Location: Rottenberg Land-de

add to watchlist

VSA 32 Feed 3 rolls 4 speeds Maximum throat depth 300mm 180W 400V Roll diameter: 80 mm Roll width 30 mm G & PIECES 5111000

Category: 203 planing machines / Four-sided planing machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 147059820

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 4.900 € add to watchlist

• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...

Category: 201 saws / Joiners circular saws
Latest update: 12.04.2024 add to watchlist
approved
dealer
item-No.: 26156825

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Category: 201 saws / Joiners circular saws
Latest update: 22.05.2024 add to watchlist
approved
dealer
item-No.: 139925575

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&ST�-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&ST�-5504215VR

Category: 204 grinding machines
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 162780338
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de

add to watchlist

Band width: 200mm; Belt length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on optionally Grinding sole with graphite coating for a longer service life of the abrasive belt Height-adjustable sanding table for utilisation of the entire sanding belt width Height-adjustable additional table with suction for sanding radii The spring-loaded belt tension automatically compensates for strip length differences. With double suction  ...

Category: 203 planing machines / Thicknessing machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 157378772
New in: 2021

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 8.490 € add to watchlist

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

Category: 209 other wood working machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 147060423

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 129 € add to watchlist

• Height: 850 - 1000 mm • max length: 2400 mm (extendable) • max. static support load: 225 kg • Dimensions (LxWxH): 1600 x 600 x 850 mm • Weight: 30 kg • Electrical connection: 230 V / 50 Hz • for crosscut saws, belt grinders, cutting saws, etc. • Installation and adjustment without tools • foldable feet for space-saving storage or transport • Quick clamping ssystems enable quick conversion, e.g. for cutting down long workpieces The list price for this work table is € 139.00 (plus VAT). (Changes and errors to technical data and prices reserved!)

Category: 209 other wood working machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 162841268
New in: 2022

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 1.090 € add to watchlist

Product name: Feeder VSA 2048L Manufacturer: Holzkraft Item number: 5119048 Condition: Brand new Technical details: • max. projection: 1050 mm • Number of PU feed rollers: 4 • Roll diameter: 120 mm • Roll width: 60 mm • Wheel travel: 20 mm • 2-speed transmission • 8 x speeds: 2/4/5.5/6.5/11/13/16.5/33 m/min • Motor power 50 HZ: 0.75 kW • Voltage: 400 V • Weight: 73.5 kg (incl. tripod) • Right-left rotation • Individual adjustment options in vertical and horizontal position for optimal feed •Metal casing • without counter for height adjustment • Dimensions (L x W x H): 1,665 x 220 x 540 mm Price: €1,090.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!)  ...

Category: 205 boring mills, machining centers
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 158413783
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 2.900 € add to watchlist

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Category: 204 grinding machines / Edge sanding machines
Latest update: 22.05.2024 add to watchlist
approved
dealer
item-No.: 159243900

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 159848060
New in: 2022

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 6.775 € add to watchlist

technical details: - TERSA planer knife quick-change system as standard - Material feed with separate motor and two speeds - Aluminium dressing stop (1200 x 160 mm) with round rod guide - Table adjustment by hand with numeric display (1/10 mm accuracy) - Helical toothed steel feed roller electrical data: - Power drive motor: 5 kW - Rated voltage: 400 V - Rated current: 9 A - Mains frequency: 50 Hz Dimensions and weights: - Length: approx. 2,000 mm - Width/depth: approx. 1,100 mm - Weight: approx. 430 kg Dressing: - Total length of the tables: 2,000 mm - Task table length: 1,034 mm - Working height: 900 mm - Chip removal max. dressing: 5 mm - Dressing stop length: 1,200 mm - Dressing stop height: 160 mm Connection suction: - Suction nozzle - Ø: 2 x 120 mm Installation information: - Space requirement length: 2,000 mm - Space requirement width/ depth ...

Category: 201 saws / Wood band saws
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 159861157
New in: 2022

new

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 2.390 € add to watchlist

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Category: 201 saws
Latest update: 12.06.2024 add to watchlist
approved
dealer
item-No.: 164225199

used

check Seller: Krüger GmbH
Location: D - Nordrhein-Westfalen
Price: VB 5.349 € add to watchlist

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Category: 201 saws
Latest update: 12.06.2024 add to watchlist
approved
dealer
item-No.: 160933952

used

check Seller: Krüger GmbH
Location: D - Nordrhein-Westfalen Land-de
Price: VB 2.059 € add to watchlist

- Exhibition machine -saw blade guide above, saw blade guide below, quick clamping device via eccentric lever---------- Technical data ---------- rolls: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 , motor 400 V: 1.5 kW, suction nozzle : 2 x 100 mm, Cutting speed: 900 / 450 m/min., dimensions (LxWxH): 768 x 512 x 2,048 mm, weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm ; new exhibition machine

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161190257
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 1.999 € add to watchlist

Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal volume flow: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motorized; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating dust in the cyclone separator and cartridge filter Effective cartridge filter with large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Including remote control and timer function for switching the extraction on and off Sight glass for checking the fill level in the container Easy emptying of the mobile filling container

Category: 201 saws
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161388847
New in: 2022

new

check Seller: Graf Maschinenhandel GmbH
Location: Herrnzell Land-de

add to watchlist

Carriage length: 3200 mm; Cutting width at the width stop: 1270 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 136.5mm; Vorritzer: Yes; Swivel range saw blade: +45Â; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Display Saw Blade Angle: Digital Display; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Scoring adjustment: manual; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power: 7kW; Suction port: 80 and 120mm; Machine length: 3500mm; Machine width: 2200mm; Weight: 715 kg; TECHNICAL DATA Dimensions and weights Weight (net) approx.715kg Connection suction Suction nozzle diameter120mm Suction nozzle diameter saw blade guard80mm Installation information Transport width990mm Machine body Length1900mm Machine body Width/depth885mm Required space Length ...

Category: 209 other wood working machines
Latest update: 06.06.2024 add to watchlist
approved
dealer
item-No.: 161388973
New in: 2023

new

check Seller: Graf Maschinenhandel GmbH
Location: bei uns in Herrnzell Land-de
Price: 929 € add to watchlist

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of power clockwise and counterclockwise rotation Including tripod, individually swivel and adjustable for horizontal and vertical use Eight speeds possible, speed selection via switch and gearbox

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online