used HURTH Gear Testing Machines

GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS

diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m

Wheel diameter - max. 300 mm Spindle speeds 250 - 2800 rpm Feed min/max 45/125 mm Module 8 Taper spindle ISO 40 Partial head angle 110º Total power requirement 3 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.4 x 1.9 m

workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chamfering and deburring machine for gears, type: zea-4, manufactured by gleason hurth, germany, 2009. Siemens cnc control. Technical condition - like new! The Gleason-Hurth ZEA-4 rotary deburring machine is designed for dry deburring of disc details up to 280mm in diameter and shafts up to 400mm in length, max. module 5. There is a set for the deburring machine. DTR.

CNC Control : SIEMENS 840D Max. Module : 7 Max. Diameter : 400 mm Z axis vertical travel : 200 mm X axis horizontal flange travel : 255 mm Y axis – shifting : 135 mm Work piece holder inclination : 45° Max. Wheel diameter : 350 mm Min. Wheel diameter : 270 mm Filtration unit

Description: Control type: CNC, control name: Siemens Sinumerik 840 C Technical details: Workpiece diameter at ratio 1:10 300 mm, workpiece diameter at ratio 1:1 212 mm, number of teeth - max. 200, number of teeth - min. 6, x-travel 300 mm, X - axis speed 0.1-5,000 mm/ sec., y-travel 400 mm, Y - axis speed 0.1-5,000 mm/sec., A - axis -170 / +170 °, total power requirement 38 kW, machine weight approx. 10 t, space requirement approx. 4.20 x 2.20 x 2.10 m weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,100 mm

Description: machine number: G0500 control: SIEMENS Sinumerik  , length of clamping surface: 1550 mm number of T-slots: 2 mm width of the T-slots: 18 mm distance between the T-slots: 180 mm centre height (tailstocks): 350 mm swivelling range of the fine wheel head (U-axis): +/- 30° centre distance tailstock/fine wheel: 120 - 225 mm  , travelling distance of infeed slide (Z-axis): 105 mm  , tool: outer diameter: 225 - 275 mm bore diameter: 160 mm width: 60 mm  , workpiece: outer diameter: 40 - 150 mm module: 1.25 - 4.0 mm max. tooth width: 45 mm  , max. tool speed: 2000 rpm feed speeds: Z-axis: 2 m/min. Y-axis: 2 m/min. U-axis: 12°/s  , connected load: 27 kVA  , please also take a look at the PDF documents of this machine workpiece diameter: 45 - 150 mm, control: SIEMENS Sinumerik, weight approx.: 6,000 kg, Approx.  ...

Description: serial number: G0502 control: SIEMENS Sinumerik 840C  , length of clamping surface: 1550 mm number of T-slots: 2 mm width of the T-slots: 18 mm distance between the T-slots: 180 mm centre height (tailstocks): 350 mm swivelling range of the fine wheel head (U-axis): +/- 30° centre distance - tailstock/fine wheel: 120 - 225 mm  , infeed slide: movement range (=travelling distance Z-axis): 105 mm  , tool diameter: 225 - 275 mm bore diameter: 160 mm tool width: 60 mm  , workpiece diameter: 40 - 150 mm module: 1.25 - 4.0 mm max. tooth width: 45  , please also have a look at the PDF documents for this machine workpiece diameter: 40 - 150 mm, control: SIEMENS Sinumerik 840C, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 3,500 x 2,300 mm

Description: serial number: J0146 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm Z4-axis (counterholder): 350 mm  , largest milling head swivelling angle: +/- 45°  , tool (cylindrical milling cutter): largest permissible tip circle diameter: 100 mm largest toothed length: 240 mm largest length: 317 mm  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore:45 mm max. workpiece weight: 3 kg  , workpiece: max. workpiece diameter: 130 mm max. modul: 3 mm  , feed rate: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML 200/1576/1340/60 Chip Conveyor, YOM: 2008, weight: 150 kg REVEN UC Compact 1 Oil Separator  , without conveyor system and tool cabinet  , please also ha ...

Description: serial number: 44742 control: SIEMENS Sinumerik  , max. wheel diameter: 150 mm min. module: 1.25 max. module: 3.5 tooth width: 45 mm bore diameter: 100 mm clamping surface: 1300 x 300 mm  , including: IFE IFS 2000 Suction Filter, YOM: 1998, power: 0.75 kW conveyor/transportation system  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, max. module: 3.5 mm, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,500 x 2,800 mm, weight approx.: 7,000 kg

Description: serial number: D0043 control: SIEMENS Simatic OP7 working hours: approx. 42802 hrs.  , max. wheel diameter: 300 mm gear width: 100 mm max. module: 5 max. workpiece: 1100 mm spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm  , please also have a look at the PDF documents of this machine control: SIEMENS Simatic OP7, max. module: 5 mm, Approx. Onsite Dimension. (l x w x h): 2,100 x 3,500 x 2,100 mm, weight approx.: 2,500 kg

Description: serial number: J0173 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm Z4-axis (counterholder): 350 mm  , largest milling head swivelling angle: +/- 45°  , tool (cylindrical milling cutter): largest permissible tip circle diameter: 100 mm largest toothed length: 240 mm largest length: 317 mm  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore:45 mm max. workpiece weight: 3 kg  , workpiece: max. workpiece diameter: 130 mm max. modul: 3 mm  , feed rate: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: REVEN UC Compact 1 Oil Separator, YOM: 2008, power: 0.57 kW, rotational speed: 2750 rpm, air supply: 1200 m3/h ASTOS DML 200x1576x1340 Chip Conveyor, YOM: 2009, weight: approx. 200 k ...

Description: serial number: 45641 control: SIEMENS Sinumerik  , clamping surface area: 1475 x 300 mm number of T-slots: 2 T-slot width: 18 mm T-slot distance: 180 mm guide rail width: 59 mm max. outside diameter: 300 mm drilling diameter: ,63.5 - 100 mm connected load: 16 kVA  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,200 mm, weight approx.: 5,500 kg

max. wheel diameter:40-160 mm gear width:90 mm max. module:3,5 min. module:1,25 weight of the machine ca.:5,6 t For detailed technical data, see PDF File Page 15-16

Horizontal spline shaft milling machine HURTH KF 32 AH

Spline milling machine Hurth LF 32

Spline milling machine Hurth LF 32

Groove milling machine Fab. HURTH Type LFV 3Masch. -No: 3566 estimated year of construction 1963Groove width max.30.35 mmTravel X: 550 mmTravel Y: 300 mmTravel distance Z: 400 mmSpindle mount ISO: SK 40Milling carriage travel: 240 mmDepth feed screw stroke: 0-110 mmTable size: 300 x 1200 mmTable width: 350 mmProjection: 415 mm8 spindle speeds: 90-1000 rpm9 crank feeds: 1.4-22.4 p. minute9 table feeds lengthwise: 10.9-163 mm / minTable drive: 0.37 kWSpindle drive: approx. 2.5 kWSpindle deflection: 410 mmCutter diameter: max. 50 mmCutter head diameter: max. 110 mmSpindle drive approx: 2.5 kWOutside dimensions approx: 1.5 x 1.45 x 1.95 mmWeight approx: 2,2 tWith:- Deep milling device- Crank drive of the milling carriage- autom. longitudinal feedused, despite year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover  ...

Wedge groove machine HURTH LF32a - see pictures

max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping.  ...

max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortuna ...

Chip centrifuge, Speed ​​variator for the shaver, 2 points 1 hydraulic for small Ø and another manual for Ø up to 550mm / Centrifuge chips, Variable speed for shaver, 2 points for small or 1 Hydraulic and a manual for Ø up to 550mm, High: 2200 mm, Long: 1650 mm, Width: 1450 mm, Module: 8, Weight: 6,500 Kg., Voltage: 220/380 W., Total power: 6.5 Kw., Cutter ø max / min: 260/180 mm, Cutter length max / min: 30/20 mm, Maximum length workpiece: 250 mm, Ø max. / min. workpiece: 550/20 mm., Specification: Universal