We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Genie GS-2046 Self-Propelled Scissor Lift The quiet, emission-free Genie GS-2046 scissor lift is the ideal machine for construction site, maintenance and installation applications on solid surfaces, indoors and outdoors. With an impressive working height of 8.10 m, it offers sufficient space and stability for workers and equipment Manufacturer: Genie Model No.: GS-2046 Year of construction: 2005 Equipment • Folding railing with full-height platform swinging door • Joystick control: two lifting and travel speeds & two pre-selectable speed levels • User-friendly diagnostic system • Platform control panel with battery charge indicator • Fully integrated diagnostic system • Power cable to platform • Attachment points for harnesses • Emergency release valve for manual lowering of the platform • Emergency stop switch on platform and floor control pane ...
used
weight max. in kg: 317 kg dimensions: Gesamt 2440 x 1180 x 2360 mm weight: 2790 kg work height max.: 12000 mm Kind of drive: elektro - Operating hours ca. 1000 h - Platform height 10 m - Drive via 24 V electric motor with integrated charger - 2 speed levels - Non-marking tires - Tire size 15 x 5 x 11 ¼, wheelbase 1850 mm - Wheel formula 4x2 - Overall dimensions 2410 x 1170 x 2390 mm (without railing 1790 mm) - Foldable railing - Basket dimensions (in length x width x height) 2260 (+ 900) x 1150 x 1100 mm - Extendable platform 900 mm - Basket and floor controls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
6 m lifting height, 2500 kg load capacity, with pallet forks & hyd. additional control circuit, 4905 kg net weight, Hp / kw: 75 hp / 56 kW, Working hours: 50, Year of construction: 2020, Lifting capacity (kg): 2500, Lifting height (cm): 600
used
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm -Own weight: 151 kg
used
; Gross weight [kg]: 1270; Inspection Date: 2023-12-16; Amount of previous owners: 1; Lift height[mm]: 460; Maximum lift capacity [kg]: 272
used
Year of construction 2007, max. working height 7.79 m, 227 kg platform load capacity, 0.81 m machine width, 1.83 m machine length, 1503 kg dead weight
new
with adjustable lower link catch hook and removable trailer coupling, hook CAT 3
used
Description: working height: 8,100 mm incomplete Approx. Onsite Dimension. (l x w x h): 2.600 x 2.200 x 1.000 mm, weight approx.: 2.200 kg
used
Description: incomplete Approx. Onsite Dimension. (l x w x h): 1.000 mm, weight approx.: 1.900 x 2.200 x 900 kg
used
weight max. in kg: kg dimensions: mm weight: kg height of stroke: 14,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Spring promotion!! In stock!Genie GS-3246 E-Drive from 2023 NEW!Working height: 11.78m, platform height: 9.78mPlatform length: 2.26mPlatform length extended: 3.18mLength: 2.44m Width: 1.16mOwn weight: 2,367kgLoad capacity: 318kgMax. people: inside 2 p outside 1 p.Two-wheel front wheel drive 24V(4x6V)Non-marking solid rubber tires
used
Max. load: 227kg, operational hours counter: 979h, with documentation, the machine has not been used for 2.5 years, the slewing ring makes noise when extended, the brakes are difficult to control, brakes somewhat abruptly, the batteries were renewed a few years ago, an on-site inspection is possible.
used
- year of production 2017 - hour meter reading 2770 mth - road lighting - Rear view camera - Work lights - 55 kW (75 hp) engine at 2200 rpm, 400 Nm torque at 1300 rpm - maximum lifting capacity 4000 kg - maximum lifting capacity at a maximum extension of 1250 kg - raised boom 13.78 m - hydraulic system pressure 260 bar -poppy. Pump flow 110 l - Torque converter, 4-speed powershift transmission - travel speed 29 km/h - servo-assisted service brake, hydraulic - Front work light - rotating warning indicator - Tires in very good condition - Electrical drive control - Front axle differential ratio - Windscreen and upper window cover -air conditioning -Leveling - 3 steering modes - on-board computer
used
ID2982 Manitou MT1745 year/Year of construction 2004 approx. 7000 hours/hours Telehandler, with 2 outriggers, with fork telescopic handler, with 2 outriggers, with fork
used
Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg
used
Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg
used
for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg
used
was connected to Gildemeister GMC 20
used
YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr
used
Capacity: 4.000 crates / h (at palletizer / depalletizer) Presently equipped for: Bottles: 0,50l GdB Kropfhals 0,70l Zwiebelhalsflasche 0,75l Heilwasserflasche 1,00l GdB Leichtglasflasche 1,25l GdB Leichtglasflasche Crates: GdB crates with 12 bottles, short side leading GdB crates with 20 bottles, short side leading Pallet: EURO pallet 1200 x 800 mm consisting of: 1 Depalletizer make: Kettner type: Pressant Duplex 2NT 1136 year: 2000 1 Palletizer make: Kettner type: Pressant Duplex 2NT 1176 year: 2000 1 Pallet Pressure Control make: Kettner year: 2000 1 Empty Pallet Magazine make: Kettner type: ST year: 2000 1 Empty Pallet Magazine make: Kettner type: ST/EST EURO year: 2000 1 Pallet Destrapper make: Born type: PAE year: 1986 Crate Conveying System make: Krones type: Multico ...
used
Spindle circle 165 mm Interface Gildemeister GM 16 AC
used
Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg