used GEBRÜDER RETTBERG Furnaces

M. No.: 7401

on behalf of the customer order for sale: Lödige Pflugscharmischer Volume 1,000 l Material: Normal steel Double jacket for heating or cooling Mounting frame

on behalf of the customer order for sale: Lödige Pflugscharmischer Volume 1,000 l Material: Normal steel Double jacket for heating or cooling Mounting frame

Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, vibrator, sorting system, vibrating system, sifter -Manufacturer: Gebruder Schmidt, sorting and vibrating system type Gravex 1 -Table size: 1210 x 900 mm, -Sieve table: can be tilted crosswise and lengthways, 2 pieces of sieves on top of each other -Blower: 2 pieces -Individual components: see photos -Dimensions: 1730/1455 / H1400 mm -Weight: 832 kg

Description: Fabrication number: 10566 Compressive force: Norm.25000 kg Ram stroke: H20 - 160 mm Ram adjustment: 120 mm Stroke rate: 40 rpm Working stroke: h 30° vUT 11 mm Working capacity: 2660 mm T Dimensions of the lower worktop: approx. 1100 x 780 mm Dimensions of the upper worktop: approx. 940 x 400 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,200 x 3,000 mm

Description: Machine number: 978570 Pressure capacity: 45000 kg Projection: 220 mm Ram strokes: 110/min Adjustable ram: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 HP Lower plate dimensions: approx. 690 x 460 mm Upper plate dimensions: approx. 360 x 200 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,200 mm

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Key data: 250 , 1500 , 3000

New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Max temperature: 650 ° C Dimensions: Inside dimensions (Wxh): Ø 260 x 700 mm Dimensions (Wxh): Ø 700 x 1400 mm Connection: 380 Volt / 8 kW Machine weight: 300 kg

TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat tunnel kiln Model: CCTO 20.96.6 Automatic Hanseat Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinge plates for sale. - 6 floors each 2000mm wide and 9600mm long - Total baking area 115.2 sqm - Lights passage on floor 180mm - Steam zone 1200mm - Temperature zone classification stove 1- 3 is top and bottom heat together - Temperature zone classification stove 4- 6 is top and bottom heat separated - Furnace weight approx. 40 tons - with 6 pull-off trolleys including 12 pull-off boards - Wagon crawlers - with thermal oil boiler - with expansion tank and drain tank - Oven is in operation and can be visited on request Metrics: 3000mm Wide 10360mm Long 3250mm High

Meltshop Consists of: 1. 70 Ton EAF (Electric Arc Furnace) • revamped in 2009 by SMS-CONCAST; • Type AC, Shell Type EBT, diam. 5.400 mm; • Tap weight 63 Ton; • Tap-to-Tap-Time 42 Min; • 100% Scrap Charge; Electrode diam. 550 mm; • Electrode Regulation; • Upper Shell Water-Cooled Panels (Steel + Cu); • Arms design Conductive (copper cladded); • Scrap charge with 3 buckets 2. 65 Ton LF (Ladle Furnace) “TAGLIAFERRI”; Tap Time 42 Min. 3. MATERIAL HANDLING SYSTEM, Conveyors and Hoppers 4. CONTINUOUS BILLET CASTER “STS” revamped in 2008; • 4-Strands; • 5 meter Radius; • Billets 130 x 130 mm; • Automatic start and mould level control; • Oscillation with AC motors and variable oscillation frequency; • Water automation of primary and secondary circuits; • Heavy Duty Straighteners; • Upgraded roller table a ...

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request

Gas-heated stove Usable dimensions (stove wagon): Depth: 4,000 mm Width: 3,500 mm Height: 1,500 mm Temperature max. 1200 C Working temperature: 980 C Heating capacity: 810 kW divided into 6 burners of 135 kW Drives stove wagon: 2 x 0.75 kW Number of rule groups: 3 Control: Siemens S7 Please note that we use the ovens according to customer requirements (e.g. dimensions, temperature, type of heating).

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinged plates for sale. -6 floors each 2000mm wide and 9600mm long -Total baking area 115.2 sqm -Lights passage in floor 180mm -Steam zone 1200mm -Temperature zone classification stove 1- 3 is top and bottom heat common -Temperature zone classification stove 4- 6 is separated from upper and lower heat -Oven compound outside 3000mm wide 10360mm long and 3250mm high -oven weight approx. 40 ton -with 6 pull-off trolleys including 12 pull-off apperates -Wagenkrabbler -with thermal oil boiler -with compensating container and drain container -oven is in operation and can be visited on request