used GILLARDON GS

Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - 12 drilling spindle speeds 120 – 3000 rpm - Projection 290 mm distance between drilling spindle and table / base plate 630 / 1190 mm - Table with 2 T-slots 570 x 475 mm Height-adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Machine vice - Quick-release drill chuck 1-13 mm - Lighting

offer 23036 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + boom clamp - Coolant device - T – Grooves Vertical on the rear side of the machine

Boring power: 35.0 mm bore capacity in cast iron: 40.0 mm Center of spindle to wall or column: 345 mm bore stroke: 170 mm Size of table plate: 600 x 500 mm Speed: 40 - 1250 U/min. spindle taper MT: 3 MK feed: 0.1 - 0.16 - 0.25 mm/U voltage: 400 V Motor output: 1.0 / 1.5 KW weight of the machine ca.: 425 kg range L-W-H: 1000 x 650 x 2150 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - Taper mandrel including keyless drill chuck * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103746 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drilling Machine make GILLARDON type R 30 VEMasch. -No: 0123213 Year of construction Dec./1976Special machine for processing flanges or rings on the outer edgeDrilling capacity: 40/50 mmTapping performance: M 42 / M 60Spindle mount: MK 4Spindle stroke: 240 mmSpindle speeds: 60 - 1000 rpm.Column diameter: 160 mmHeight adjustment: 680 mmDrive power: 1.1 / 1.6 kWWith- pneumatic additional sleeve stroke- Mot. rotatable, vertical, positioned under the spindlexa0xa0 Three-jaw chuck Roto-Rekord Drm. 475 mm, bore 190 mm- without lower part- without a tableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column Drilling Machine make GILLARDON type GB 50 VFabr. -No: 0111260 Year 1978Drilling capacity ST: 60:50 mmDrilling capacity GG: 20:60 mmDrilling capacity ST: 60:65 mmTapping performance: M 50 / M 70Spindle mount: MK 4Stepless spindle speeds: 35 - 950 rpm.4 automatic feed rates: 0.1 - 0.4 mm / revQuill stroke: 225 mmProjection: 360 mmDistance spindle / table min./max.:165 / 740 mmDistance spindle / base plate min./max.:1220 mmRound table diameter: 500 mmDrive power: 4.0 kWDimensions L x W x H: 600 x 900 x 2100 mmWeight approx: 810 kgWith- stepless speed adjustment- 4 automatic feeds- Built-in cooling device- round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

From bankruptcy: Gillardon GB 40 VE Year of construction 2012 No.4519-130-3913 Electromagnetic feed 0.1/0.16/0.25 on the cross lever at the touch of a button Speeds infinitely variable from 60-600rpm 2 step motor Work light Emergency stop button 200mm Pinol Stroke 350mm projection Table size 630x535mm--Clamping surface 400x500mm MK 4 Mount--with Röhm Quick Release Feeder 3-16mm Height of machine 2060mm--Weight about 480kg The machine runs very smoothly and precisely Table and columns with clear signs of wear Digital display of the speed without function + Vice Cekaba-Bon 230mm

GILLARDON GB 20 - Column Drill -Stepless speed regulation -Drilling capacity in steel approx. 30mm -Projection 285mm -Drilling stroke 150mm -Table clamping surface 400x400mm -Table height adjustment approx. 650mm -Drilling depth stop -Speed display -Emergency stop -Work light -Foot switch Dpfv3P Dimensions: LxWxH 0.7x0.5x1.85 meters / Weight approx. 650Kg

Gillardon Bench Drill GT 16 - MK2 recording - Stepless speed Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Line drilling machine make GILLARDONwith 4 drilling heads type R 20Fabr. -No: 0150262, 0150263, 0150264, 0150265,Technical specifications:Drilling capacity GG: 25 mmSpindle mount: MK 2Quill stroke: 150 mmProjection: 285 mmColumn diameter: 105 mmMotor power per drill head: 0.5 / 0.9 kWWork table size approx .: 1600 x 400 mm15 spindle speeds: 200 - 4500 rpm.Overall external dimensions L x W x H: 1600 x 800 x 1800 mmWeight approx: 1700 kgWith- 1 drilling head with right-left rotation- 4 x drill chucks- each drill head individually adjustable in height and can be swiveled around the column- separate coolant deviceused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

Key data: 30 mm

Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm

Boring power: 32.0 mm bore capacity in cast iron: 40.0 mm spindle stroke: 175 mm morse taper: MK 3 Kurzspindel throat: 320 mm column diameter: 130 mm feed: 0.1 - 0.16 - 0.25 mm/U table:: 570 x 475 mm T-slots: 2 x 224 x 14 mm turning speeds: 60 - 1600 U/min threading: M 27 / M 36 total power requirement: 1.1 / 1.8 kW weight: 530 kg range L-W-H: 570 x 960 x 1950 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - Thread cutting device up to M36 - Button for R/L running of the work spindle - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - machined base plate - 3x MK tapping quick-change chucks - separate coolant device - EMERGENCY stop button at the front - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7 ...

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 1,6 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Column drilling machine with: - Feed - variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm

Drilling capacity (steel): approx. 40mm Drilling capacity (casting): approx. 50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, infinitely variable: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1; 0,16; 0.25 mm/rev Accessories  Tapping device  Coolant facility  Work light  Expulsion wedge  Drill chuck  Documentation  Various tension wrenches L x W x H: approx. 630x985x2020mm Weight: approx. 620kg Other accessories on request Price and other technical data on request

Offer 24280 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 290 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button -Lighting - Machine vise - 15 pieces HSS – drill bits 8 to 20 mm

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 220 mm : 4 speeds: 160 - 4000 U/min total power requirement: 3,5 kW weight: 850 kg dimensions: 1150 x 750 x 2200 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling d ...

bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 170 mm taper MK: 4 MK table-size: 800 x 250 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 200 - 1600 U/min total power requirement: 1,6 KW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,5 x 0.9 x 2,1 m Pillar drill - Feed - Vario speed - Thread cutting device - Left/right rotation - Keyless chuck - Cross table X=400mm, Y=250mm - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

‘Infinitely variable speed adjustment, 2 speed levels, spindle holder: MK2, quick-action drill chuck Röhm Spiro 3-16, max. distance drill chuck to table: approx. 450mm, quill stroke: 150mm 1100 x 900 x 2000 mm 500 kg unchecked loaded on truck

Column drilling machine with: - Advance - variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 320 mm Drilling stroke 170 mm Recording MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 1.6 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 m 1200 x 800 x 2150 mm 650 kg unchecked loaded on truck

Pillar drilling machine - Feed - Vario speed - Thread cutting device - Left/right rotation - Keyless chuck - Cross table X=400mm, Y=250mm - Emergency stop device Drilling capacity in steel 30 mm Thrust 320 mm Drilling stroke 170 mm Mounting MK 4 MK Table size 800 x 250 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed ​​200 - 1600 rpm Total power requirement 1.6 KW Machine weight approx. 0.6 t Space requirement approx. 1.5 x 0.9 x 2.1 m 1500x900x2100 mm 600 kg unchecked loaded on truck

Machine number: 0125791 Spindle speed: 250 - 6300 rpm Drilling depth: 170 mm Table dimensions: 440 x 350 mm With 2 grooves and 2 vices Jaw width: 110 mm and 125 mm 900 x 800 x 1800 mm 300 kg unchecked loaded on truck

Serial number 0123 2222  Attention, the shown machine vice is not included in the scope of delivery! 900x600x2000 mm 350 kg unchecked loaded on truck

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST05-2W VBR 1B i= 56.875 -Adjustable gear: GST05-2K VBR 071-12 10B 59 - 11 rpm -Spring-loaded brake: -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 25 x 45 mm -Design: B3 -Dimensions: 430/280/H225mm -Weight: 21.7 kg

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

SLEEVER , STEAM TUNNEL & TRANSPORTATION UNIT, 2006