used FAMUP MCX

Machine details 1105-02951 Machine type Machining Center - Vertical Make FAMUP Type MCX 700 P Built 1998 Control type Cnc Location Haguenau Origin Italy Delivery Right away Freight base EX WORK Technical details x-Way 700 mm y-way 500 mm z-way 640 mm Control FANUC OM Spindle speed 8000 rpm Spindle motor 22 kW Speeds x/y/z 40 mm/min Table size 600 x 450 x 2 mm Tool change time 1.5 sec Tool magazine: 30 SK 40 Total performance requirements 25 kW Machine weight approx. 5.5 t Information contrOL FANUC OM SPINDLE 22KW 8000 U/MIN spaenefoerderer

Machine details Bearing number 1105-03282 Machine type Machining Center - Vertical Make FAMUP Type MCX 450 Built in 1997 Control type CNC Control FANUC OMC Warehouse FRANCE Country of origin Italy Delivery time immediately Freight base EX WORK Technical details x-path 450 mm y-path 300 mm z-way 400 mm Control FANUC OMC Spindle speed 8000 rpm Spindle motor 5 kW Rapids x/y/z 30 mm/min Table size 600 x 300 mm Tool change time 0.9 sec Tool magazine: 16 FACH SK 30 Information WITH CONTROL FANUC OMC 8000 RPM 5 KW 2.5 TONS MASSE 2 X 2.25 X 2.3 16 FACH MAGAZIN SK 30

Machine details Bearing number 1105-03112 Machine type Machining Center - Vertical Make FAMUP Type MCX 600 Built in 1995 Control type CNC Warehouse HAGUENAU Country of origin Italy Delivery time immediately Freight base EXW 'as available' Technical details x-path 600 mm y-path 400 mm z-way 400 mm Control SIEMENS 810 D - Travel X-axis 600 mm - Travel Y-axis 400 mm - Travel Z-axis 400 mm - Number of NC axes 3 - Clamping surface (left-right) 400 mm - Clamping surface (front-rear) 400 mm - Workpiece weight (max) 300 kg - Speed range up to 6000 rpm - Tool holder ISO SK 40 - Drive power (max.) 11 kW - Number of tool positions 18 - Tool diameter max. 75 mm - Tool change time 2 s - Space requirement length 3200 mm - Space requirement width 2,900 mm - Total height 2600 mm - Total weight approx. 3500 kg Information Machine under power CNC SIEMENS 810 D Count ...

Machine Details Stock-No. 1105-03507 Type of machine Machining Center - Vertical Make FAMUP Type MCX 600 Year of manufacture 1994 Type of control CNC Storage location FRANCE Country of origin italy Delivery time immediately Freight basis EXW 'as is where is Technical details x-travel 600 mm y-travel 400 mm z-travel 400 mm Controls FANUC OM - X-axis traverse 600 mm - Y-axis traverse 400 mm - Z-axis traverse 400 mm - number of controlled axes 3 - table surface (left-right) 400 mm - table surface (front-back) 400 mm - workpiece load (max) 300 kg - spindle revolutions (max) 6000 rpm - tool fixture ISO SK 40 - drive power (max) 11 kW - number of positions 18 - tool diameter max. 75 mm - tool changing time 2 s - space requirements length 3200 mm - space requirements width 2,900 mm - total height 2600 mm - total weight approx. 3500 kg Additional information F ...

Used Famup MCX 1000 Machining center - vertical Used machine visible in Italy, sold as it is

FAMUP MCX 600 Pallet Changer Construction 1997 mechanics completely overhauled with new NSK roller guides and other improvements for a total cost of over 30 thousand euros. C.N.C. Fanuc series O-M + remote buffer + handwheel + 4th axis predisposition + optical scales on all axes. Enhanced coolant system. Chip evacuator. Technical features: Longitudinal travel 600 mm Cross travel 400 mm Vertical stroke 400 mm Table dimensions 500x400 mm Pallet number 2 Maximum distance between the center of the table and the nose of the spindle 530 Maximum weight on the table 300 Kg Rapid feed 36 mm / min Number of tools 24 Spindle taper ISO 40 BT connection Spindle speed 10000 rpm Spindle power 7.5 KW Weight 3700 kg Complete with cones and various equipment.

Used Famup MCX 600 ECO Machining center - vertical Spindle revolutions with refrigenerant: 10000 revolutions / min Spindle power: 5.5 kW Tool type: ISO 40 tool cone tie rod Tool magazine: N ° 18 Maximum tool mass: 6 Kg Pneumatic connection: 6 Bar System air flow: 3000 L / h Working strokes: X 600 mm - Y 400 mm - Z 400 mm X axis work feed: 0.166 m / s Rapid feed X axis: 0.3 m / s Y axis work feed: 0.166 m / s Y axis rapid feed: 0.3 m / s Z axis work feed: 0.166 m / s Rapid Z axis: 0.3 m / s Distance between spindle and table min - max: 140 - 540 mm Useful surface: 800 x 375 mm T-slots: 3 T-slot center distance: 125 mm T-slot width: 14 mm Max load allowed on the table: 250 Kg Distance table - ground: 850 mm Memory: 2 Gb hard disk Power supply: 400V - 50Hz Overall dimensions: 2010 x 2750 x 2900 h mm Weight: 3500 Kg

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

Table length: 1150 mm Table width: 510 mm Longitudinal X: 1000 mm Cross Y: 585 mm Vertical Z: 615 mm Positions ATC: 16   Positions APC: 0   CNC Brand: Heidenhain MACH-id   4215 MAKE       FAMUP / Emco ITALIA TYPE         MCX 1000 YEAR        200. SPECIFICATIONS X - Travel    1000 mm Y - Travel     585 mm Z - Travel      615 mm Controll        TNC 430 Table Length x Width       1150 x 510 mm Table load in kG      800 Kg Spindle Taper     Bt 40 kW power on spindle   18.5 kW Spindle speeds / ranges     8000 Rpm ATC tool changer        16 Number off controlled axis     3 DIMENSIONS Length    4100 mm Wi ...

Table length: 500 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 570 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18i-M MACH - ID 6240 Make: FAMUP Type: MCP 60 E Control: FANUC 18i-M YOP: 1999 X – Travel    600 mm Y – Travel    400 mm Z – Travel    570 mm Table Length    500 mm Table Width     400 mm Table load        300 kg Feed rate X-Axis     10,000 mm Feed rate Y-Axis      10,000 mm Feed rate Z-Axis      10,000 mm Spindle Taper           ISO 40 ISO/Bt/Mk Power on spindle       11 kW Speeds / ranges         10.000 Rpm ATC / revolver      &nb ...

A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h

Table length: 1300 mm Table width: 520 mm Longitudinal X: 1000 mm Cross Y: 500 mm Vertical Z: 600 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens 3-axis CNC machine (VMC)EMCO Famup - VMC 100  X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              600mm Table Length:            1300mm Table Width:             520mm Table load:              800 Feed rate X-Axis:        30000mm/min. Feed rate Y-Axis:        30000mm/min. Feed rate Z-Axis:        30000mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:      &nbs ...

Vertical machining center FAMUP MMV 160 CNC Fanuc CNC Fanuc 18i Table 2000x600 X 1600 Y 600 Z 600 Quick: Z 30 m / min X, Y 20 m / min Spindle 10000 rpm ISO 40 13.5kW max 30 tools high pressure Weight: 8200 kgs The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 1600, Y axis: 600, Z axis: 600, CNC type: Fanuc 18i, Spindle speed RPM: 10000

Introducing the Famup MC45 E Precision Vertical Machining Centre available on Exapro online marketplace: - Manufacturer: Famup - Model: MC45 E - Year of Manufacture: 1999 - Technical Condition: In good working condition - Error during tool change - Lehmann rotary axis EA-510 with tailstock EA-510.R-F1 (service done on 30.10.2020) - Dimensions: - Length: 1925.0 mm - Width: 1630.0 mm - Height: 2285.0 mm - Weight: 2700.0 kg - Axis X: 450.0 mm - Axis Y: 300.0 mm - Axis Z: 400.0 mm - Table Length: 600.0 mm - Table Width: 300.0 mm - Maximum Part Weight: 150.0 kg - Number of Tool Pockets: 16.0 - Spindle Motor Power: 4.0 kW This Famup MC45 E Precision Vertical Machining Centre is a reliable machine with a Lehmann rotary axis, suitable for various machining operations. Dont miss the opportunity to enhance your production capabilities with this efficient equipment.

SPINDLE - Spindle speed: 12000 rpm - Spindle power: 35/22.5 kw - Spindle taper: ISO 40 AXES - Axis stroke: X=1600 - Y=650 - Z=600 mm TABLE - Dimensions of the table: 2000 x 650 mm - Maximum weight allowed on the table: 2000 kg TOOL STORE - Tool changer: 30 tools Equipped with : - 1 CN FANUC 18i-MB - Watering in the center - 1 Chip conveyor Stock n°: 7538 14500x2500x3060 mm 14000 kg unchecked loaded on truck

Table dimensions ( x-y/mm) 2400 x 600 Stroke ( X/mm) 2100 Stroke ( Y/mm) 600 Stroke ( Z/mm) 600 Type of controll selca 3045 Tool magazine yes Number of inserts in the tool magazine 30 Weight ( ton) 13 Location turin italy

x-travel: 1600 mm y-travel: 1400 mm z-travel: 1500 mm Control: Siemens 840D b-axis: 360000 x 0,001 ° spindle speed max.: 6000 U/min drive capacity: 37 kW tool taper: HSK 100-A length in total: 350 / 1200 mm diameter: 150 mm max. boring power axial: 37 kW max. milling power radial / at tool length: 10 kW / 150 mm max. tool weight: 30 / 60 kg tool clamping power: 40 kN total power requirement: 80 kW dimensions of the machine ca.: 9,6 x 8,5 x 5,5 m This machine is sold together with: - another identical machine type MCX 900, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCR 120/80, year 2007 (our stock no. 03258), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 298 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 1200 mm - pallet ...

Burkhardt + Weber MCX1200 machining centre with Siemens Sinumerik controls, 300-position automatic tool changer and Knoll type 370K-3 twin swarf collection unit, Tools included The Burkhardt + Weber MCX1200 is a high-performance machining center designed for demanding and complex machining tasks. Burkhardt + Weber is known for producing robust and precise machine tools, and the MCX1200 is no exception. Below are the specifications and features associated with the Burkhardt + Weber MCX1200 machining center: Specifications: - X-Axis Travel: Approximately 2000 mm (78.74 inches) - Y-Axis Travel: Approximately 1600 mm (62.99 inches) - Z-Axis Travel: Approximately 1600 mm (62.99 inches) - Table Size: Typically around 1600 mm x 1200 mm (62.99 inches x 47.24 inches) - Maximum Table Load Capacity: Approximately 8000 kg (17,637 lbs) - Spindle Taper: HSK 100 or ISO 50 - Spindle Speed: Typical ...

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1800 mm Control: Siemens 840D b-axis: 36000 x 0,001 ° spindle speed max.: 6000 U/min drive capacity: 60 kW tool taper: HSK 100-A length in total: 350 mm diameter: 150 mm max. boring power axial: 37 kW max. milling power radial / at tool length: 10 kW / 150 mm max. tool weight: 30 kg tool clamping power: 40 kN total power requirement: 100 kW dimensions of the machine ca.: 9,2 x 8,8 x 6,3 m This machine is sold together with: - another identical machine type MCR 120/80, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCX 900, year 2007 (our stock no. 03253), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 208 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 750 mm - pallet changer 2-fo ...

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.