We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg
used
Roller trestles roll bed Manufacturer: PEMA / ESAB Type: 3 TXA / 3 TXN (1 unit) Year of construction: 2008 Load/section max.: 1.5 tons / 1.5 tons Maximum force F: 3 kN Rolling speed range: 60 – 1200 mm/min. Fixed center height: 434 – 800 mm Total diameter range min-max.: 106 – 2179 mm Steel rolls piece/section: 2 pieces Roller diameter / total width: Ø 350 / 80 mm Mains voltage: 230 V – 1 Ph – 50 Hz/16 A Length: 1690 mm / 1445 mm Width: 670 mm / 570 mm Height: 615 – 878 mm / 610 – 878 mm Weight: 480 kg / 420 kg Remote Control / Cable Length: RC31H / 6m
used
second hand welding toner Brand: PEMAMEK OY Model: 60TS Power: Three-phase 380V Crazy turner + motorized turner Diameter range (Minimum - Maximum): 900 - 5200mm Translation for motorized tacking movement Type: Self-aligning Command with movement control and regulator for rotational speed variator Year 2000 Weight: 1990kg
used
Workpiece weight: 8000 kg Table diameter: 400 mm Welding positionerPEMA - TW8000-400(5) MACH-ID 7812 Make: PEMA Type: TW8000-400(5) Year: 2015
used
Workpiece weight: 8000 kg Table diameter: 1 mm Welding positioner PEMA - LW8000-80 (3) MACH-ID 7810 Make: PEMA Type: LW8000-80 (3) Year: 2015
used
Workpiece weight: 80000 kg Table diameter: 10000 mm Welding positionerPEMA - Jig Roller Unit 80 MACH-ID 8477 Make: PEMA Type: Jig Roller Unit 80
used
Welding length: 4700 mm Part diameter minimum: 20 mm Overall length: 50000 mm Overall height: 5400 mm Welding machinePEMA - PBW 5000/2 MACH-ID 8490 Make: PEMA Type: PBW 5000/2 Year: 2015 Pemamek PEMA PBW50002 Plate Butt Welding Line Butt welding line for steel plate, 1000 to 4700mm in width and 20 to 120mm in height/thickness, joins sections of plate prior to rolling into can shapes used for the construction of large scale off shore, 62m 800T, jacket foundations and towers for wind turbine towers. The welding equipment is situated on a carriage that traverses the work piece on an overhead beam. The welder comprises of a laser guided tandem head submerged arc welder with electric induction pre heater. The steel plate sections are positioned and held using hydraulic pins and a set of electronic magnets The PEMA RC5200 conveyor system is designed to move and push plates throug ...
used
Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.
used
Planetary mixer with whirler tool, 2 mixing stars, 4 mixing shovels and scraper / discharging shovel. Maximum capacity per batch: 2.250 l. / 3.600 kg, hardened concrete output per batch: 1.500 l., processable grain sizes: 0 - 65 mm, with dual outlet (operated hydraulically). Incl. main drive 75 kW and many spare parts.
used
PEMAMO MDR 120E horizontal honing machine was manufactured in 2002 by the Swiss company PEMAMO HONING PHOSA SA. The machine is used for specialised honing of bores, such as piston cylinders, in order to achieve the required dimension, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvature or waviness are removed. The honing machine performs finishing of bores with diameters from 1.5 mm to 40 mm, using a spindle rotating from 310 to 1860 times per minute. The horizontal honing machine is provided with an AR 340 semi-automatic expansion unit with a repeatability of 1 µm. The total weight of the machine is approximately 135 kg. Technical data of the PEMAMO MDR 120E honing machine - minimum honing diameter: 1.5 mm - maximum honing diameter: 40 mm - rotational speed of the spindle: 310-1860 rpm - semi-automatic expansion un ...
used
Technical data Voltage 50 Hz 3x: 380 Volt
used
Horizontal boring machine / slotted hole drilling machine / in perfect condition, ready for immediate use, immediately available With a tool diameter of 10 mm, a maximum hole depth of 160 mm and a milling length of 160 mm, this long-hole drilling machine from PEMAL MALBORK, type DWLA, is ideal for precise and demanding work. Specifications: - Tool diameter: 10 mm - Maximum hole depth: 160 mm - Maximum milling length: 160 mm - Adjustment: With front/rear drilling device - Table adjustment: up/down and sideways - Table rotation angle: +/-20° - Work table dimensions: 620 x 280 mm - Motor power: 1.5 kW - Dimensions: Length/width/height 1120 x 830 x 1200 mm - Weight: 300 kg The adjustment with front/rear drilling device as well as the table adjustment options offer maximum flexibility. The table can be rotated by +/-20°. The machine is in first-class condition and rea ...
used
Workpiece weight: 225 kg Workpiece diameter maximum: 7000 mm Workpiece diameter minimum: 1000 mm Number of rolls: 4 Welding positionerPEMA - 150 TA (S) MACH-ID 7825 Make: PEMA Type: 150 TA (S) Year: 2010 2 x Driven unit loading capacity 75.000 Kg 1 x Idler unit loading capacity 75.000 Kg As set Rolling capacity 225 Ton Load capacity per section:75000T Vessel range Minimum: 1000 Vessel range Maximum: 7000Ø Variable rotation: 60-1250 mm/MinRpm No of wheels per section:4 Wheel dimensions: 580 x 220Ø x mm Length: 4120mm Width: 1880mm Height: 1400mm
used
Workpiece weight: 120 kg Workpiece diameter maximum: 6000 mm Workpiece diameter minimum: 1000 mm Number of rolls: 8 Welding positionerPEMA - A80 MACH-ID 7800 Make: PEMA Type: A80 Year: 2015 1 x driven unit 40 ton 1 x idler unit 40 ton Rolling capacity 120 Ton Load capacity per section:40T Vessel range Minimum: 1000 Vessel range Maximum: 6000Ø Variable rotation: 60- 1250 mm/MRpm No of wheels per section:8 Wheel dimensions: 440Ø x mm Length: 3300mm Width: 1200mm Height: 2200mm Weight: 3700kg
used
Key data: 1500 mm, 3500 kg
Stock number: 3871 WELDING TURNTABLE Manufacturer: ESAB PEMA, Type: 3500 F Machine NO.: A7001, Year of manufacture: 1987 Specifications: Table size 1500 mm Ø Large workpiece weight 3500 kg Gr. rotational torque 3100 NM Infinitely variable table rotations. 0.01 - 0.8 pr/min Hydraulic drive and tip Length: 2000 mm, Height: 1100, Width: 1500 mm, Weight: 1200 kg
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used
used
New ESAB Miggiytrac 1001 electr. Welding chassis Speed: 0.5 - 1.2m/min as new/unused (may show signs of storage) in OVP These are unused goods in their original packaging, which can only show signs of storage. This and further details can be found in the photos. Price excl. VAT (#7717).
used
Technical data: Max height of welding 4,000 mm Max Schweissllänge 4,000 mm with ESAB A6 control
used
Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109
used
Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg
used
TIG welding rectifier make ESAB type Power TIG 160 / LTR 160Mash. -No: 8429101564 Year 1991Welding range transformer stepless: 4 - 160 Axa0xa0xa0 TIG / DC: 4 - 160 ADuty cycle at 160 A: 35%xa0xa0xa0 at 110 A: 60%xa0xa0xa0 at 80 A: 100%Dimensions L x W x H approx: 700 x 350 x 400 mmfor welding electrodes and TIG, steel, VAWith- compl. Welding station equipment- mobile undercarriage self-madeused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
ESAB LAE 800 welding device The machine is located in France.
used
Max. electrode force: 5600N, nominal output: 130kVA, connected load: 324kVA, weight: 630kg.
used
Max. electrode force: 12.7kN, nominal power: 3x 80kVA.
used
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.