Category: 101 boring mills and machining centers
Latest update: 22.06.2024 add to watchlist
item-No.: 164160735
New in: 2000

used

Seller: Exapro
Location: Land-de

add to watchlist

Technical Details x-travel 420 mm y-travel 330 mm z-travel 250 mm table surface area 650 x 325 mm spindle taper SK 40 spindle turning speed range 0 - 5000 U/min power feed x/y/z 6000/6000/8800 N rapid traverse 12 m/min ATC 12 Pos tool diameter max. 63 mm tool length - max. 220 mm control SIEMENS SINUMERIK 820 D total power requirement 15 kVA weight of the machine ca. 2,6 t dimensions of machine L x W x H 2,43 x 1,76 x 2,30 m Accessories 2 hydr. vices HILMA NC 125, various tool holders, coolant this extra information is standard for this model. Please always double-check the details during a visit The EMCO VMC 300 vertical machining center, manufactured in 2000, is a versatile and efficient machine designed for precision machining tasks. It features a generous x-travel of 420 mm, y-travel of 330 mm, and z-travel of 250 mm, providing ample range for a variety of work ...

Category: 103 milling machines
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 163741296
New in: 2003

used

check Seller: GINDUMAC GmbH
Location: Land-at

add to watchlist

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

Category: 103 milling machines / CNC Milling Machines
Latest update: 21.05.2024 add to watchlist
approved
dealer
item-No.: 161644416
New in: 1995

used

check Seller: Alfred Feldmann Werkzeugmaschinen
Location: 64720 Michelstadt Land-de

add to watchlist

- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 03.05.2024 add to watchlist
approved
dealer
item-No.: 162235216
New in: 2000

used

check Seller: WMH24
Location: 73563 Mögglingen Land-de

add to watchlist

Control Siemens 810 D with shopmill Travel X/Y/Z 420/330/240 mm Speed 5000 1/min Tool magazine for 12 tools SK 40 Table surface 850x325 mm Weight 2900 kg

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 162296991
New in: 2000

used

Location: Land-de

add to watchlist

x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 650 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS SINUMERIK 820 D total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,43 x 1,76 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 162296992
New in: 2000

used

Location: Land-de

add to watchlist

x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 850 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS, ShopMill total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,40 x 2,33 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines / Vertical Milling Machines
Latest update: 13.09.2023 add to watchlist
approved
dealer
item-No.: 162391870
New in: 2003

used

check Seller: GINDUMAC GmbH
Location: 67663 Kaiserslautern Land-at

add to watchlist

BRAND: EMCO YEAR: 2003 MODEL: VMC 300 APPLICATION TYPE: MILLING LOCATION: AUSTRIA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK

Category: 103 milling machines / CNC Milling Machines
Latest update: 13.04.2024 add to watchlist
approved
dealer
item-No.: 163803418

used

check Seller: Osterer Werkzeugmaschínen
Location: 4853 Steinbach am Attersee Land-at
Price: VB 12.000 € add to watchlist

Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter, ....

Category: 101 boring mills and machining centers
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 160851274

used

Location: Land-nl

add to watchlist

Table length: 1300 mm Table width: 520 mm Longitudinal X: 1000 mm Cross Y: 500 mm Vertical Z: 600 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens 3-axis CNC machine (VMC)EMCO Famup - VMC 100  X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              600mm Table Length:            1300mm Table Width:             520mm Table load:              800 Feed rate X-Axis:        30000mm/min. Feed rate Y-Axis:        30000mm/min. Feed rate Z-Axis:        30000mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:      &nbs ...

Category: 101 boring mills and machining centers
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 164327130

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 600 mm Table width: 600 mm Longitudinal X: 650 mm Cross Y: 550 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 1   CNC Brand: Siemens 5-axis CNC machine (VMC)EMCO - MAXXMILL 500 new 2014  High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours X - Travel:                  650mm Y - Travel:                  550mm Z - Travel:                  500mm A - Axis:                    -100 to +100° B - Axis:                    360.000° Table Length:                ...

Category: 1300 other machines and plants
Latest update: 17.10.2018 add to watchlist
approved
dealer
item-No.: 2119428
New in: 1973

used

check Seller: Tank und Apparate Barth GmbH
Location: 76694 Forst Land-de
VS

add to watchlist

EMCO - Loading arm 4 inches - used - as spare part carrier

Category: 401 filling machines
Latest update: 25.03.2019 add to watchlist
approved
dealer
item-No.: 8362043
New in: 2008

used

check Seller: Tank und Apparate Barth GmbH
Location: Land-de
VS

add to watchlist

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 83577119

new

check Seller: Weber Werkzeugmaschinen GbR
Location: 87719 Mindelheim Land-de

add to watchlist

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...

Category: 1300 other machines and plants
Latest update: 13.05.2024 add to watchlist
approved
dealer
item-No.: 123486432

used

check Seller: Komplett-Konzept Verwertungs GmbH
Location: Land-de
Price: VB 1.470 € add to watchlist

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

Category: 103 milling machines / Tool-Milling Machines
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 147230387

used

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Category: 103 milling machines
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158218752

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

Category: 103 milling machines
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158218334

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Key data: 800 Heidenhain, 400 TNC 124, 600

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm  Weight:         2.200 kg 

Category: 102 lathes
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158218342

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Key data: 200

Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø:        400mm Swing over cross slide Ø:250mm Spindle bore:            50mm Spindle power:           5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         3000Rpm Length:                  1.900 mm  Width:                   1.000 mm  Height:                  1.300 mm  Weight:                  840 kg 

Category: 102 lathes
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158218659

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

Category: 103 milling machines
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158219051

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

Category: 102 lathes
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158219091

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 0 mm Center distance: 1000 mm Spindle bore: 36 mm SPECIFICATIONS Swing over bed Ø  330 mm Control  Conventionel Swing over cross slide  210 mm Distance between centres  1000 mm Spindle bore  36 / 25 mm Spindle speeds / ranges  30 - 2500 Rpm Power  2.2 Kw DIMENSIONS Length  1800 mm Width  850 mm Height1400 mm - incl. collet device + inserts 29 pieces 2 - 30 mm- incl. 3 chuck 150 mm ?- incl. 4 chuck 150 mm ?- incl. change gears  

Category: 102 lathes / CNC Turning Machines
Latest update: 21.02.2020 add to watchlist
approved
dealer
item-No.: 160891693
New in: 2003

used

check Seller: A-Z Maschinenwelt
Location: Land-de

add to watchlist

CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of construction: 2003 Production number: R2A R40 01 Center height: 1160 mm Center width: 700 mm turning length: 510 mm orbit diameter over bed: 430 mm rotation diameter via paddling slide: 210 mm workpiece weight: 30 kg Working spindle: Spindle head according to DIN5026 Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm chuck diameter: 160 mm Rod passage diameter: 45 mm torque: 78 Nm Support: Tool system DIN69880 Chisel cross-section: 12 x VDI30 Number of bed sleds: 1 Number of paddling sledges: 1 Plan stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill cone: MK4 Quill diameter: 60 mm Main spindle: 1500 rpm Plan axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Feed speed: Longitudinal slide min./max.: 0/24000 mm/min Paddling sledge min./max.: 0/20000 mm/mi ...

Category: 102 lathes
Latest update: 22.06.2024 add to watchlist
item-No.: 162903669
New in: 2001

used

Seller: Exapro
Location: Land-fr
Price: 31.500 € add to watchlist

Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition

Category: 103 milling machines
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 158219154

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

Category: 102 lathes
Latest update: 22.06.2024 add to watchlist
approved
dealer
item-No.: 163740862
New in: 2001

used

check Seller: GINDUMAC GmbH
Location: Land-it

add to watchlist

This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online