used CLOOS GL

Shielded gas welding machine, welding machine CLOOS type GLC 206 Colour No. 1150 Year of construction approx. 1984 Nominal power 200 Amp. Power 250 Amp. - 60% ED 200 Amp. - 100% ED Adjustment range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drives - equipped with 1.2 mm welding wire - hose pack 3 meters with central connection - current display - voltage indicator - air cooling with fan - pressure mannometer for gas cylinder space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg; used

Shielded gas welding machine CLOOS type GLC 357 N Colour No. 576 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED Adjustment range infinitely variable connecting hose package 4.5 meters mains connection 380 Volt, 50 Hz, 32 Amp. Plug- 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - water-cooled - pressure mannometer for gas cylinder - welding machine equipped with 1 mm welding wire space requirement L x W x H 1250 x 600 x 1100 mm Weight 260 kg; used

MIG-MAG inert gas welding device make CLOOS type GLC 351Fabr. -No: 1186, built in 1992Technical specifications:Power range: 15 - 350 A.60% power at: 350 A100% power at: 270 AWith- mobile- Hose package 4.0 m- separate wire feed- Articulated arm with hose package- water-cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MIG-MAG inert gas welding device make CLOOS type GLC 351Fabr. -No: 596, built in 1991Technical specifications:Power range: 15 - 350 A.60% power at: 350 A100% power at: 270 AWith- mobile- Hose package 4.0 m- separate wire feed- Articulated arm with hose package- water-cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MIG-MAG inert gas welding system make CLOOS type GLC 351 CArt. -No: 824250000 Fabr. -No: 178 Year of construction 2000Technical specifications:Power range: 15 - 350 A.60% power at: 350 A100% power at: 270 AWith- mobile- Hose package 4.0 m- separate wire feed- Articulated arm with hose package- water-cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MIG-MAG inert gas welding system make CLOOS type GLC 351 CArt. -No: 824250000 Fabr. -No: 172 Year of construction 2000Technical specifications:Power range: 15 - 350 A.60% power at: 350 A100% power at: 270 AWith- mobile- Hose package 4.0 m- separate wire feed- Articulated arm with hose package- water-cooledused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Shielded gas welding machine CLOOS type GLC 357 N Colour No. 476 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED Adjustment range infinitely variable connecting hose package 3.5 meters mains connection 380 Volt, 50 Hz, 32 Amp. Plug- 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 3.5 meter hose package- 4 meter hose package with central connection and BINZEL hand torch - water-cooled - pressure mannometer for gas cylinder space requirement L x W x H 1300 x 600 x 1100 mm weight 260 kg good condition; used

Shielded gas welding machine CLOOS type GLC 403 PA-TS Fabr. No. 8198 Year of manufacture 1994 Nominal power 400 amp. Power 400 Amp. - 60% ED 310 Amp. - 100% ED Adjustment range infinitely variable connecting hose package 4.5 meters mains connection 380 Volt, 50 Hz, 32 Amp. Plug- 2-stroke and 4-stroke welding device - external wire feeder type CK 72/5TSZK with 2 roller drive and 4.5 meter hose package - 4 meter hose package with central connection and EHRIG hand torch type Senator-800-D - water-cooled - pressure mannometer for gas cylinder - welding machine equipped with 1 mm welding wire space requirement L x W x H 1250 x 600 x 1100 mm weight 300 kg good condition; used

length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

Inert gas welding device, inert gas device -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Inert gas welding device, inert gas device -Max. Welding power: 320 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

current intensivity: 35 - 320 A length: - mm height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m MIG - MAG welding machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH  ...

Double gantry longitudinal seam welding machine Oerlikon/Cloos Year of manufacture: 2011, Retrofit 2019 Working range: welding length 32,000 mm, Ground chassis incl. ball bearing Travel: 32,000 mm Travel speed: 0.3-5.0 m/min Chassis dimensions: approx. 2,600 x 4,900 mm Track gauge: approx. 2,000 mm Platform incl. lifting column Stage dimensions : approx. 3,000 x 4,800 mm Total height: approx. 7,000 mm Rail height: approx. 420 mm Swivel range: +/- 90° Travel height: 3,200 mm Boom arm: 5,200 mm, Double gantry with two chassis and burner carriage 2x Cloos 600A welding machines The machine is capable of welding both transversely and longitudinally, as well as round seams in conjunction with a roller-turn device or a tilt-and-turn table. The travel distance of the system can be extended by adapting the rail system and energy chain on site.

2005 Cloos Romat 310 Welding robot including work cell Z1 Type: Romat 310 Manufacturer: Cloos Year: 2005 Complete overhaul: 2018 Control: Rotrol II Including: Impulse welding source GLC 353 MC3 / R (300 A, 100% DZ) Wire feeder CK 98 A/R Welding torch MRW 350-35 Burner cleaning unit Burner straightener Bundle of connecting cables Start/stop control panel Manual programming device PHG Welding torch holder with integrated device enabling shutdown in the event of a collision Common base + cell Z1 Positioning of the work piece - Manual two-position rotary table - Basic frame for clamping all components Security technology - Complete cage with protective elements - Service door Dimensions of the cell: 360x220 cm cell Z1, height 217 cm Total height with upper attachment - 290 cm Table with pneumatic locking - width 103 cm x depth 80 cm Find more here - / Contact us  ...

Plasma cutter CLOOS type CPS 40/80 built in 1990 Power at 60 % ED 80 Amp. Power at 100% ED 40 Amp. Adjustment range: 40 and 80 amperes (2 stages)Cutting capacity for steel, max. 25 mm , hose package length: 5.5 meters , mains connection: 400 volts with 32 amps. Plug-in hand torch CLOOS Dimensions L x W x H 700 x 600 x 750 mm Weight 160 kg Good condition; used

CNC round seam welding machine make CLOOS type CD 500 / SR / 4LB / IA / BFabr. -No: 10005, wiring diagram -No: 86516 year 1986Center height: 450 mmTurntable diameter: 600 mTip width: 1500 mmDimensions L x W x H approx: 3000 x 1000 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cloos MIG 350 Synergic - Welding machine - Metal invert gas welding (MIG) and metal active gas welding (MAG) of steel, aluminum and chromium-nickel - Incl. operating instructions - Built in 2007 Specification Entrance: - Nominal input voltage: 3/PE AC 400 V - Nominal frequency: 50 Hz - Maximum input current: 23 A - Mains fuse sluggish: 32 A - Mains connection cable: 4 x 4 mm² - Power plug: 32 A Exit: - Open circuit voltage Uo: 18 - 45 V - Welding range: 30 - 350 A - Duty cycle 100 %: 220 A - Duty cycle 60 %: 280 A - Duty cycle 40 %: 350 A General data: - Noise emission: < 70 dB(A) - Schutart: IP 23 - Cooling type: AF - Dimensions WxHxD: 430 x 930 x 980 mm - Weight: 160 kg

TIG welding machine with water cooling CLOOS GL 250 I-HAT 20 / 250 A 10 / 20 V Dimensions: 1200 x 600 x 800 mm Year of construction 1990

Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Water Pump, Centrifugal Pump, Small Centrifugal Pump CLOOS, C.E.M.E. MTP 600 Best. No.: 023 03 3900 Q = 9 l/min H = 35 m motor: 0.3 kW 400 V 3AC connection cable: 1.0 m with conversion kit to 220 V 1AC ! New ! Dimensions: 225 x 115 x 125 mm

This CLOOS QIROX CS-50 was manufactured in 2023. A state-of-the-art welding robot featuring a Qineo NexT 452 with 450A power and water cooling module. It includes a two-station positioner capable of handling loads up to 5 kN, ensuring robust performance and flexibility. Ideal for complex welding tasks, the robot supports fiber optic connection cables and has a comprehensive safety system with light curtains and safety fences. For more information about this welding robot, please reach out to us.

In working condition, recently checked by distributor.