used BUERENER Chip Conveyors

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Spaen centrifuge in the run-through process CEPA Padberg Y. 1986 1400 rpm Diameter 500 mm Spaene throughput up to 600 L/per hr = approx. 1.2 to. / Hour incl Spaene supply Plant Tuev prued until 2016 (last check see sticker) In the fully automatic AS series, short rieselfaehige Spaene are continuously and equally fed from above via a foerderer of the centrifuge. Entoelung short, rieselfaehiger spaene, aluminium and steel Continuously Up to 600 l/h

Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee

Storage number: 3550 Various Manufacturer: SP-NTRANSPORT-R - CHIP CONVOYER, Type: KABELSCHLEEP SRF 053 Built: 2001 Specifications: Length 2000 mm Length: 4500 mm, Height: 1700 mm, Width: 800 mm, Weight: 300 kg

Manufacturer: SOMMERMEYER Filtertechnik GmbH Type: SF 38 Y.O.M.: 1997 Conveyor length total approx. 3000 mm Throw in: approx. 1300 x 400 x 400 mm Ejection height approx. 1300 mm Drive Gearmotor 0.25 kW 220/400 V Coolant pump Brinkmann TB303/300 160 l/min H: 18 m 1.7 kW 230/400 V Total dimensions: approx. 3000 x 1600 x 1700 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Chip Conveyor

Key data: 4200 mm, 200 mm, 700

Article number: 27-02-128 Manufacturer: Knoll Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 4200x1300x1400mm Weight: approx. 400kg Type: Hinged Belt Conveyor Dimensions insertion: Length: approx. 2500mm Width: approx. 500mm Height: approx. 300mm Band width: approx. 200mm Band length: approx. 1600mm Ejection height: approx. 700mm Accessories: Coolant tank Other accessories on request Price and other technical data on request

Key data: 1600 mm, 230 mm, 300

Article number: 27-02-136 Manufacturer: Leroy Somer Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1988 L x W x H: ca.1600x550x600mm Weight: approx. 150kg Type: Scratch Tape Conveyor Dimensions insertion: Length: approx. 900mm Width: approx. 300mm Height: approx. 200mm Band width: approx. 230mm Band length: approx. 900mm Ejection height: approx. 300mm Other accessories on request Price and other technical data on request

Key data: 3000 mm, 240 mm, 820

Article number: 27-02-148 Manufacturer: Chip conveyor Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 3000x900x1300mm Weight: approx. 400kg Type: Hinged Belt Conveyor Dimensions insertion: Length: approx. 2000mm Width: approx. 370mm Height: approx. 220mm Band width: approx. 240mm Band length: approx. 2000mm Ejection height: approx. 820mm Accessories: Coolant tank Coolant pump Other accessories on request Price and other technical data on request

Sell a vibratory conveyor. Manufacturer Grimm Spaichingen Type RL40 Diameter 600mm Spiral width approx. 45mm Total height on mobile tripod approx. 1450mm Device alone 600*380mm high 220V Condition used

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar specifications: • Condition: new • Length (mm): approx. 7520 • Width (mm): approx. 770

Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C

Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation.

With hydraulic pump.

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm

Conveyor length: 0 mm Belt width: 0 mm Drop height: 0 mm