WEEKE macchina utilizzata in vendita

Indicazioni: Lunghezza del pezzo: min 200 mm Lunghezza pezzo: max 2500 mm Larghezza pezzo: min 70 mm Larghezza pezzo: max 850 mm Spessore pezzo: min 12 mm (per lavorazione piana) 16 mm (per lavorazioni orizzontali) max. 60 mm Peso del pezzo: max. 30 kg Velocità degli assi: Velocità vettoriale X/Y = 30 m/min Z = 15 m/min Tratti somatici: Area del documento del pezzo in lavorazione Supporto meccanico per mezzo di una rulliera per i pezzi. Area di asportazione del pezzo Supporto meccanico per mezzo di una rulliera per i pezzi Ingranaggio per trapano V8 Corsa di avanzamento direzione Z: 60 mm Profondità di foratura: max. 38 mm Senso di rotazione: destra/sinistra Velocità: 2800 1/min, frequenza controllata Propulsione: 1,8 kW Portapunte: d = 10 mm per Sistema di cambio rapido Lunghezza totale della punta: 70 mm Diametro della punta: max. 35 mm Distanza ...

Centro di lavoro verticale WEEKE BHX055 con cambio utensile Tipo: Weeke BHX 055 Ore di funzionamento: 4.340 ore Indicazioni: Centro di lavoro a controllo numerico per foratura, fresatura e segatura e cambio utensile a 4 pieghe Campo di lavoro degli assi: min. 20070mm, max. 3.050850mm Spessore massimo di lavoro: 12-60 mm Peso massimo del pezzo: 35 KG Nutrire: X, Y: 50 m/min Z: 15 m/min Foratura V13: 5 mandrini di foratura per foratura verticale sul lato superiore in direzione di inchXinch da controllare individualmente 4 mandrini di foratura per la foratura verticale sul lato superiore in direzione di polliciYinch controllati individualmente 4 Mandrino di foratura per foratura orizzontale sul lato superiore in direzione di inchXinch da controllare individualmente 2 mandrini portapunta per foratura orizzontale sul lato superiore in direzione polliciYinch d ...

Indicazioni: Lunghezza del pezzo: min 200 mm Lunghezza pezzo: max 3050 mm Larghezza pezzo: min 70 mm Larghezza pezzo: max 850 mm Spessore pezzo: min 12 mm (per lavorazione piana) 12 mm (per la lavorazione orizzontale sui due bordi trasversali e sul bordo superiore), Nota: In caso di foratura orizzontale dal bordo inferiore, la foratura centrale è consentita solo fino a uno spessore del pezzo di 19 mm. max. 60 mm Peso del pezzo: max. 30 kg Velocità degli assi: Velocità vettoriale X/Y = 50 m/min Z = 15 m/min Tratti somatici: Area del documento del pezzo in lavorazione Supporto meccanico per mezzo di una rulliera per i pezzi. Area di asportazione del pezzo Supporto meccanico per mezzo di una rulliera per i pezzi. Ingranaggio di foratura V13 Corsa di avanzamento direzione Z: 60 mm Profondità di foratura: max. 38 mm Senso di rotazione: destra/sinistra Veloci ...

Dettagli tecnici: - Area di lavoro asse X: 3130 mm - Area di lavoro asse Y: 1250 mm - Tavolo di lavoro Pod e binario - Potenza elettromandrino principale: 9 KW - Numero di assi controllati: 4 assi - Numero totale di mandrini di foratura: 12 - Numero totale di posizioni cambio utensile: 8

Key data: 3250 mm, 1250 mm, 125 mm

Macchina a 4 assi con tavolo a consolle, 6 supporti possono essere spostati manualmente in X, 2 ventose per console, Pompa per vuoto 100m³/h Attacco per il vuoto per stencil Display a LED per l'indicazione della posizione della ventosa Campo di lavoro X: 200 – 3250 mm Campo di lavoro Y: 70 – 1250 mm Campo di lavoro Z: 12 – 125 mm (passaggio 150mm) 19 mandrini di foratura verticali 6 mandrini di foratura orizzontali, di cui 4 in direzione X e 2 in direzione Y. Sega per scanalature girevoli 90 Mandrino di fresatura 12 kW fino a 24000 giri/min con interpolazione dell'asse C 360, raffreddamento a circolazione di liquido – Spazio per pick-up posteriore WZW a 14 marce e laterale destro a 14 marce Unità adattatrici: -Cassetta di sicurezza 2 mandrini con ugello di soffiaggio -Unità di segatura, foratura, fresatura Flex 5 -Traversa a 4 mandrini Ausilio per il cambio u ...

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 con tampone per ricci in ingresso Tampone per ricci con 30 posti tampone, lunghezza fuori tutto: 5700 mm Larghezza utile: 2000 mm Spostabile manualmente Centro di lavoro Weeke con un supporto di lavorazione in alto e uno in basso Tavolo di inserimento con alimentazione e posizionamento automatico del pezzo DIMENSIONI DEL PEZZO Lunghezza minima del pezzo: 200 mm Lunghezza max. del pezzo: 2500 mm Larghezza minima del pezzo: 70 mm Larghezza max. del pezzo: 1000 mm Spessore minimo del pezzo: 4 mm Spessore massimo del pezzo: 80 mm Max. impilamento del pezzo: 2 pz. Configurazione della macchina: 2V32 ALTA VELOCITÀ 7500 Unità di foratura verticale disposta nel supporto di lavorazione superiore e inferiore, ciascuno con 32 mandrini di foratura (controllabili singolarmente con gamma di velocità variabile). 2H8X/2Y Gruppo di foratura orizzontale disposto nella ...

Macchina per foratura, incollaggio e inserimento duebel controllata da CNC Adatto anche per la foratura di connettori per mobili grazie a 3 assi controllati Un video della macchina in esecuzione può essere inviato su richiesta. Larghezza di lavoro max. 1250mm, per doppia occupazione 600mm con arresto centrale pneumatico 4 morsetti pneumatici per pezzi Unità di perforazione orizzontale con 3 punte recuperabili singolarmente, potenza motore 1,5 kW Unità di perforazione verticale con 3 punte recuperabili singolarmente, potenza motore 1,5 kW Asse X, asse Y, asse Z controllato da cnc Di conseguenza, sono possibili rapidi cambi tra diversi spessori di materiale. Lunghezza tassello 30 e 35mm, attualmente impostato su 8x30mm Trasportatore vibrante per tasselli in legno Monitoraggio della colla Quantità colla regolabile elettronicamente Alimentazione colla tramite pompa a do ...

Centro di lavoro CNC SETTIMANA Tipo: BHC 280 Woodwop 5,0: Anno: 2005 4 assi

Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.

CNC processing centre Brand: Weeke Type: Optimat BHC 655 Year: 2004 - axis movement (X-/Y-/Z-direction) via a compact linear guide system, dust-protected - ball screw spindle (Y- and Z-direction) and rack and pinion drive (X direction) Software: WOODWOP, machine data acquisition, provision of teleservice BASIS-table basic equipment 6 traverses 1 low-maintenance vacuum pump with 100 m³/h output 6 traverses, continuously adjustable in the X direction 4 program-controlled workpiece stops, mounted as a rear row of stops 6 program-controlled workpiece stops, mounted as a front row of stops 2 side stops mounted on an aluminium profile in Y-direction, which can be switched off manually when oversized workpieces are being processed. The side stops can be adjusted manually in Y-direction. 6 workpiece lifting arms for heavy workpieces Milling spindle HSK 9 kW (S6 50%), l ...

There is a milling line for lock and hinge available, line includes (1) lock and hinge milling machine, with top/ bottom handle hole unit, lock case milling and drilling machine (2) shifting and aligning unit (3) hinge machine with right and left turning miller and drilling aggregates, max. work piece dimensions: 3000x1350x72mm, speed: 50s/workpiece, length: 13,505mm, width: 4456mm, including documentation, available in March 2023.

CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...

Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x-axis: 9 pieces, drilling spindles vertical ...

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle type: individually controllable 1128 - horizontal drilling gear with 4 spindles in X-direction 1129 - horizontal drilling gear with 2 spindles in Y-direction 1012 - Grooving ...

Description: • CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx. 18 KW • Useful working area approx. 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 7.50 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1.50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h  ...

Description: • CNC machining centre • Serial number 0-250-06-2992 • Total installed power approx. 18 KW • Useful working area approx. 3250 x 1300 mm • Travelling way X-axis: 3955 mm, Y-axis: 1685 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 9 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit to groove • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 11 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Software Windows / HOMAG WOODWOP • Remote control panel • 6 consoles with 22 vacuum suction cups in total • 5 lifting modules for heavy workpieces • BECKER KVT 3.100 ...

Description: X axis work area 2500 mm Y axis work area 1000 mm Max panel passage 80 mm No. collets 2 Automatic panel stacking system , With Motorised transfer BORING UNITS 1 Unit : top Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 BORING UNITS 2 Unit : bottom Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM ROUTER SPINDLES 2 Unit : bottom No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM GROOVING UNIT 1 Unit : top Unit : with 0 / 90 degree positioning Max. tool diameter : 125 mm r.p.m. : 7500 RPM GROOVING UNIT 2 Unit : bottom Unit : with 0 / 90 degree positioning Max. tool di ...

Description: Type of work Drilling Routing X axis working area 4250 mm Y axis working area 1500 mm Working Table Pod and Rail Main Electrospindle power 11 KW Number of controlled axes 4 axes Total number of drilling spindles 25 Total number of tool changer positions 26 X axis work area 4250 mm X axis travel 5050 mm Y axis work area 1500 mm Y axis travel 2150 mm X axis movement speed 80 m/min Y axis movement speed 60 m/min Z axis movement speed 20 m/min No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 10 Pod Position Indicators yes Vacuum pump yes No. pumps 2 Single capacity 100 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 25 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 4 Motor power : 11 kw r.p.m. : 24000 RPM Grooving unit 1 GROOVING UNIT 1 Unit : top Grooving unit : yes Unit : Fixed for Grooving in X Max.  ...

Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT Aggregates: HSK63 LOCK CASE, D=16 MM, 2 SPINDLES, HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with variou ...

Description: WEEKE BHX055 vertical machining centre with 4-fold tool changer Operating hours: 4,340 hours Technical Data: CNC controlled machining centre drilling, milling and sawing & 4-fold tool changer Net working area: min. 200x70 mm, up to max. 3,050x850 mm Thickness of workpiece: 12-60 mm Weight: Max. 35 kg  , Speed: X, Y: 50 m/min Z: 15 m/min  , Drilling V13: 5 Drill spindlesfor machining the top of workpiece in 'X direction'. All 5 drills can be controlled individually 4 Drill spindles for workpiece machining in 'Y direction'. All 3 drills can be controlled individually 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 drills can be controlled individually 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 drills are individually controllable  , Free aggregate: 1 Free aggregate with HSK63 q ...

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen ...

Working dimensions 2750 x 1220 mm (X,Y) Main spindle 6 kW Drills 12V, 2+4 H Grooving saw 100mm in X axis Tool tray 6 places woodWOP 5.0 software CNC Simulator The machine had a regular service Laser cross for placement of suction cups Incl. documentation and backup SW

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

Produttore: Weeke, Tipo: BP 140 Optimat, Anno: 1997, Controllo: Woodworp, Campo di lavoro X: 3600, Campo di lavoro asse Y: 1200, Campo di lavoro Z: 150, Asse C: sì, Numero di mandrini: 1, Motore di fresatura 1 ore Potenza: 7,5, Giri/min 1): 24000, Numero di cambi utensili: 12, Punta verticale-X: 10, Punta verticale Y: 10, Punta orizzontale-X: 4, Punta orizzontale Y: 2, Tavola trasversale: sì, Pompe per vuoto m³/h: 160, Sistema di serraggio utensile: HSK 63, Unità sega: sì, CE-Sign: sì, Anno:1997

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.