torna kullanılmış satılık (3,060)

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-6

Main Spindle: - spindle rpm: 4000rpm - spindle motor power: 18,5kW - C-axis: 0,001° Sub spindle: - spindle speed: 6000rpm - spindle motor power: 10kW - C-axis: 0,001° Turret: - 12 positions - live tooling (4500rpm, 5,5kW) - tooling in turret not included! Machine us equipped with: - chip conveyor - bar feeder - live tooling - sub spindle - Y-axis (-51mm ~ +51mm) - part catcher - tool setter Auction-ID: A1-50690-24

Machine is equipped with: - chip conveyor - tailstock - 225mm SMW AUTOBLOK chuck - tooling as showed in pictures Auction-ID: A1-50690-13

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-7

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14

Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4

Machine is equipped with: - 380mm chuck - tailstock - 3 toolholders Auction-ID: A1-50690-21

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

Machine is equipped with: - tailstock Auction-ID: A1-50690-23

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Auction-ID: A1-50690-11

turning diameter over bed: 297 mmturning diameter over slide rest: 160 mmturning length: 500 mmspindle bore: 36 mmturning speeds: 30 - 3550 U/minspindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,511,5 mOn customer order - Private machine - Accessories:3-jaw chuck4-jaw chuckCollet chuck with lever clampingMultifix A + various holdersOperating toolVarious turning toolsOriginal documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Ind ...

turning diameter: 186 mmturning length: 350 mmcontrol: FANUC O/T turning speeds: 4.000 U/minspindle bore: 61,0 mmtool holder: 12 Stückchucking diameter: 170 mmoperating hours: htotal power requirement: 7,5 kWweight of the machine ca.: 2,4 t- FANUC - CNC control- SMB 600 bar feeder with magazine- Chip conveyor- 3-jaw lathe chuck, 170 mm- MK 4 tailstock- Various tool holders- Cooling system- Full enclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler Turret Lathe Manufacturer: Weiler Machine type: Turret Lathe Industrial turret lathe designed for metal turning operations. Equipped with a turret tool system for performing multiple machining operations with different cutting tools. Suitable for metalworking, component manufacturing and mechanical engineering applications. Reported to be in good condition and currently under power. Technical specifications: Machining process: Turning Tool system: Turret Operating status: Under power Approx. dimensions (L × W × H): 1,800 × 1,000 × 1,600 mm Approx. weight: 1,000 kg Condition: Used, good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-8

control: FAGOR 8055 TC workpiece weight: 10.000 kghandwheel: inkl. Chip coveyor: inkl. centre height: 500 mmgreates pass round over bed: 1300 mmSwing diameter face slide: 1000 mmcentre distance: 5000 mmtravel of cross-slide: 680 mmrapid traverse x + z axis: 8 m/minbed width: 900 mmspindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpmspindle bore: 104 mmspindle diameter in front bearing: 180 mmturning speed range:: Anzahl 4 main drive: 37 kWTorque: 10.000 Nm: Sauter 300 x 300 diameter of quill: 180 mmquill stroke: 300 mmHeight: BIS ZUR FLACHFÜHRUNG 805 mmtotal power requirement: 45 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mEquipment-4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was created with  ...

turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...

turning diameter: 570 mmturning length: 1000 mmcontrol: MANUALplus 620 swing diameter over face slide: 340 mmspindle bore: 93 mmspindle turning speed range: 1 - 3000 U/mintransmission ratio: 2 rapid power traverse in X-and Z direction: 7 / 10 m/minmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgworkpiece weight in steadies max.: 1250 kgmain drive motor: (100/60% ED) 20 / 25 kWDimensions (LxWxH): 2,94 x 2,20 x 1,96 mmax. torque on the spindle: ca. 1400 Nmweight of the machine ca.: 3,4 t HEIDENHAIN MANUALplus 620 control system- Control system expansion for ICP and DIN programs, incl. thread repair Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm,mounted in front of the turning center (limits achievable turning diameterand tailstock operations, reduces turning length) 2-speed planetary gearbox, automatic shifting Main s ...

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe with bar feeder Dimensions: lathe: l - 3.2m, w - 1.6m, h - 1.7m bar feeder: l - 2m, w - 0.7m, h - 1.2m Auction-ID: A1-50595-65

turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...

turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 510 mmturning diameter over slide rest: 310 mmcentre distance: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuck (diameter 250mm)tool holder devicetail stock 3x steady restTechnische Daten / technical details:Spitzenweite / center to center 2000 mmUmlaufdurchmesser über Bett / rotary diameter over bed 510 mmUmlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mmSpindelbohrung / spindle hole 52 mmDrehzahlbereich / spindle speed 44-2240 UpM /rpmGewicht der Maschine ca. / weight ca. 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmswing diameter: 3300 mmturning height: 2200 mmworkpiece weight: 15000 kgvertical adjustment of the crossrail: 1600 mmturning speed range - faceplate: 1 - 90 U/minmain drive motor: 60 kWram head swiveling: +/- 35 °ram head - cross travel: 1200 mmram head - vertical travel: 720 mmfeed range: 1 - 3000 mm/minControl: FANUC 0i-TF total power requirement: ca 70 kWweight of the machine ca.: 41 tdimensions of the machine ca.: 4,8 x 4,8 x 5 mComplete overhaul in 2026- CNC FANUC 0i-TF- 1 ram on crossbeam- 4 clamping jaws for face plate- CE-- mechanical overhaul of all components (adjustment of the geometricalparameters of the machine according to ISO 3655)-- Grinding of the guides-- New telescopic covers-- FANUC main motor-- new electrics and CNC control-- new Fanuc servomotors-- ball screws dia. 50mm-- new hydraulicsThe data for this ad was created with ModulMWS - the  ...