Üretici:
(kategori: 102)
turning diameter:1600 mmturning length:12000 mmcontrol:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories.For further technical data and accessories, pls browse the Appendix.Parallellathe WMWmod. 4 GUIDE-WAYS¦ CNC: FAGOR 8050¦ bed: monolithic¦ centres height: 800 mm¦ centres distance: 12000 mm¦ swing over cross-slide: 1250 mm¦ turret: automatic 4 positions¦ tailstock: motorized¦ tailstock connection: hydraulic¦ platform: diam. 1000 mm¦ steady rests: nr.02¦ chip conveyorWarranty: noneTake advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.
turning diameter:1390 mmturning length:14000 mmweight of the machine ca.:13 tMore information can be found in the Appendix.
turning diameter over bed:3800 mmturning diameter over slide rest:3200 mmturning length:12000 mmfaceplate turning speed range -stepless-:2 - 200 U/minmax. workpiece weight:90.000 kgbed width:4000 mm2 steadies
turning diameter over bed:2600 mmturning diameter over slide rest:2200 mmturning length:5000 mmfaceplate:2050 mmnumber of spindle speeds:0,7 - 70 rpmtotal power requirement:ca. 22 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
turning diameter over bed:1450 mmturning diameter over slide rest:1000 mmturning length:8000 mmspindle bore:160 mmturning speed range:2,8 - 560 U/minbed width:850 mmfaceplate diameter max.:1400 mmturning diameter in the gap:1800 mmlength of gap:600 mmdimensions of the machine ca.:12 x 2 x 2,5 mwith Digital Readout2 fixed steadies dia 1070 mmchip conveyor
:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mmswing diameter:550|650|1000|1250 mmturning height:450|500|750/950|1000 mmspindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/minTravel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mmTravel of ram (horiz.):300|340|500|700 mmrapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/minTool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kWMachine height:2600|2910|4020|4605 mmweight of the machine ca.:4500|6000|13000|18000 kghydraulic motor:2,2 kWservo motor X-axis:1,6|1,6|4|7 kwservo motor Z-axis:3|3|7|7 kwcoolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW:35|40|50|70 kvaCNC controller:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fag ...
faceplate diameter:1400 mmswing diameter:1470 mmturning height:1325 mmram stroke range:750 mmadjustment of cross-rail:850 mmmax. workpiece weight:12000 kgfaceplate turning speed range:4,5 - 224 U/minfeed per revolution:0,06 - 8 mmrapid speed:1,8 m/mintotal power requirement:50 kWweight of the machine ca.:16 tMachine was modernized in 2008 with new electric 2-axes digital readout5-station turret head autom. swivellingdiverse toolholders
turning diameter over bed:400 mmturning diameter over slide rest:250 mmturning length:1000 mmmax swing over gap:520 mmHeight of centres:200 mmcrossed path:230 mmbed width:218 mmmain spindle bore:52 mmspindle size:MK 6 speeds::55-2000 U/minturning angle of tool post:90 gradtail stock:50 mmtaper in tailstock:MK 4 threading metric:0,4-7 mmthreading WHITWORTH:4-60 TPI total power requirement:2,2 kWdimensions of the machine ca.:1940 x 820 x 1545 mmweight of the machine ca.:750 kgtailstock quill:110 mmtapping modul:0,4-3 mmtapping diametral:8-84 Gang/Zoll
turning diameter over bed:500 mmturning diameter over slide rest:310 mmturning length:1500 mmspindle turning speed range:7 - 710 U/minfeed range:5,6 - 224 mm/mintotal power requirement:15 kWweight of the machine ca.:3,7 tdimensions of the machine ca.:2,9 x 1,4 x 1,6 mMachine with 2-axis digital readout- MULTIFIX quick tool change device- 3-jaw chuck
: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 24100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments)Live centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGH ...
: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...
: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with various collets from 1 to 27 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live te ...
turning diameter: 300 mmturning length: 284 mmcontrol: Fanuc x-axis: 170 mmz-travel: 335 mmtotal power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 65 mmMax. Turning length: 450 mmSpindle diameter in forward position: 110 mmcontrol: System TX8 I number of spindle speeds: 4.000 U/minCNC lathe | TNC 42/65 - 2007 equipped with bar loader.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 170 mmMax. Turning length: 120 mmbar capacity: 52 mmcontrol: FANUC MSX-501 travel -x1 axis: 140 mmtravel -x2 axis: 140 mmtravel -z1 axis: 450 mmtravel -z2 axis: 410 mmtravel -y axis: +/- 40 mmtravel - b axis (spindle 2): 525 mmspeeds station 1: 60 - 6000 U/minspindle bore 1: 62 mmspeeds station 2: 60 - 6000 U/minspindle bore 2: 62 mmdriven tools turning speeds: 6.000 U/minCNC Turning- and Milling Center | ZT 1500 Y - 2005 equipped with 2 turrets for driven tools, Y-axis and bar loader.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 32i Model A weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: SIEMENS SINUMERIK 840D sl weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3 YThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mmturning diameter over slide rest: 180 mmturning length: 1000 mmturning diameter in the gap: 460 mmturning speeds: 70 -2000 U/mincentre height: 160 mmspindle bore: 27 mmtotal power requirement: 2,0 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,8 x 1,2 x 1,6 mCentre lathe (lead-screw and feed-rod lathe)- 160 mm 3-jaw chuck- Faceplate- Spare jaws- Quick-change tool post (base unit)- 3 tool holders- 2 steadies- Live centre- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipped with Koton Technologies extraction, year of construction 2022. Includes chip removal belt. Including glasses, accessories, etc. Auction-ID: A1-49846-1
For the benefit of Leadwell V30i Machining Center. Includes 2 x 8-Piece Hagro Tool Drawer Cabinet with drills, tools, accessories, accessories, etc. Dimension approx. L165 x W80 x H110 cm. Auction-ID: A1-49846-7
For the benefit of Daewoo Puma 200MC Machining Center. Includes 8-Piece Hagro Tool Drawer Cabinet with collet set, drills, tools, accessories, accessories, etc. Dimension approx. L105 x W80 x H115 cm. Auction-ID: A1-49846-9
Equipped with Fanuc Series 18T operating system. Includes chip removal belt. With a 12-position rotating tower. Auction-ID: A1-49846-8
For the benefit of Fat Tur630A MN lathe. Includes 3-Piece Hagro Workbench with Heuer Front bench vise. Dimensions approx. L200 x W90 x H86 cm. Auction-ID: A1-49846-2
Auction-ID: A1-49846-14
For Maximill VMC-1470A machining center. Includes 2-Piece Hagro Workbench with drills, tools, accessories, accessories, etc. Size approx. L200 x W80 x H94 cm. Auction-ID: A1-49846-4
turning diameter: 310 mmturning length: 1000 mmcontrol: MSX 501 total power requirement: --- kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 65 mmturning length: 650 mmcontrol: TX8i-s Main Spindle:: spindle passage: 65 mmspindle turning speed - stepless: 5000 U/mindrive capacity - spindle motor: 24 / 17 kWspindle bearing diameter: 110 mmTorque: 192 Nmx-travel: 175 mmz-travel: 650 mmy-travel: 80 (+/- 40) mm2nd Spindle:: spindle passage: 65 mmspindle turning speed - stepless: 5000 U/mindrive capacity - spindle motor: 24 / 17 kWspindle bearing diameter: 110 mmTorque: 192 Nmtotal power requirement: 85 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 3.420 x 3300 x 2.258 mMain spindle: fully reconditioned in 2026- TRAUB TX8i-s CNC control- Main and counter spindles-- 2 x Hainbuch Kombi Axfix 65-- C-axis 0.001°- 3 tool turrets (10-position, VDI 30)-- Turret: 10-position with driven tools, 6,000 rpm, 5.5/3.7 kW- Coolant mist extraction and separation system- In-machine optical tool measurement (TR ...
2.500 € 
