Üretici:
(kategori: 102)
: neu : Bulgarien : 109100 €: 2061.99 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.0 ...
turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...
turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories. Auction-ID: A1-45979-46
Consisting of: (1x) Clamping plate, (1x) carriage/guide seat and 4-jaw chuck. Auction-ID: A1-45979-47
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. turning length: 760mm, Max. turning diameter: 405mm, Max. turning diameter over bed: 405mm, Diameter over slide: 216mm, Feeds in the x-z: 203/762mm, Spindle speed:800 rpm, Passage over the slide: 508mm, equipped with CNC control: Hass-control, incl. accessories on multifix holders, Turning steels and drill chucks; see photos for more details Auction-ID: A7-46619-340
including hydraulic bezel Guide rails from the machine bed should be reground without 4-fold steel holder and chuck visible raw material is not included in the article scope Auction-ID: A7-46729-10
Turning length: 1000mm; Factory number: 37895; Turning diameter over bed: 500mm; Turning diameter over support: 280mm; Tip height: 250mm; Spindle Passage: 71mm; Speed range: 18-1800/36 step rpm ; equipped with digital display, Make: Fagor ; various accessories, Top grains, Turning steels etc. Auction-ID: A7-46619-270
turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Control: SIEMENS 840 DNumber of axes: 2Max. turning diameter: 420 mmMax. turning length: 1000 mmX/Z axis strokes: 200 / 1000 mmSpindle bore: 82 mmSpindle speed: 0 – 3,000 rpmSpindle motor power: 14.5 kWTurret: VDI 40, 12 stationsChuck: Autoblok Ø 250 mmTailstock: Chip Conveyor: PresentRemarks: Machine in good working order.Weight (kg): approx. 5500Year & Manufacturer: 2001 – MENTI Auction-ID: A1-46647-254
Maximum rotation diameter: 760 mm Maximum turning diameter: 550 mm Maximum turning height: 600 mm Chuck: 15 inches X-axis: 325 mm Z-axis: 625 mm Axis C: Indexation 0.001° Spindle speed: 2,000 RPM Spindle power: 22 kW Spindle nose: A2-11 Type of training: By belt Turret: 12 stations (BMT75) Motorized tool speed: 3,000 rpm Power of motorized tools: 7.5 / 5.5 kW Tool dimensions: 32 x 32 mm Bore bar diameter: Ø 50 mm Fast Forwards: 20 / 18 m/min CNC Control: Fanuc 32i Model B Weight: 8,500 kg Floor dimensions: 2,010 x 3,212 mm Auction-ID: A1-46647-17
Spindle diameter: 580 mm Tailstock stroke: 570 mm Turret stroke: 150 mm Machine not working, FANUC power unit NEEDS REPLACEMENT Sale intended only for revampists or scrap dealers Auction-ID: A7-46538-32
24-position tool changer HAAS HRT310 Rotary Table - 4 Axis Table diameter: 310 mm Bore diameter: 82 mm RENISHAW 40-2 Probe With accessories Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-46538-30
X-axis travel: 150 mm Z-axis travel: 520 mm Tailstock stroke: 340 mm Self-centering head diameter: 210 mm X-axis repeatability +/- 0.003 mm Z-axis repeatability +/- 0.005 mm Sale intended only for revampists or scrap dealers NOT Working - Faulty Board Auction-ID: A7-46538-33
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-46647-236
CNC Control: SIEMENS 810 DNumber of axes: 3Max. turning diameter: 325 mmMax. turning length: 400 mmMax. passage over the bed: 500 mm X/Z axis strokes: 215 / 420 mmSpindle speed: 30 – 4,500 rpmSpindle bore: 52 mmSpindle power: 15 kWTurret: 12 VDI 40 positions with motorized toolsChuck: 3-jaw hydraulic Ø 204 mmTailstock: present, CM4 taperTailstock sleeve stroke: 130 mm, Ø 80 mmIncluded equipment: coolant, bar feederWeight (kg): approx. 4500Year & Manufacturer: 2000 – HYUNDAI Auction-ID: A1-46647-253
X-axis travel 420 mm Z-axis travel 1100 mm VDI 50 tool holder 2x ASA 8 spindles LH Head Working Hours: 16624 Working hours head RH: 16272 With loading table diameter: 1700 mm Equipment: 2x automatic arms for loading and unloading workpieces Unloading roller conveyor dimensions: 3000x530 mm Tools and spare parts included Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-46538-40
: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 €: 905.15 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON ...
: neu : Bulgarien : 115600 €: 2184.84 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6 ...
dönüş çapı: 550 mm dönüş uzunluğu: 1500 mm kontrol: Fagor 8055 x ekseni: 108 mmz ekseni: 3000 mm toplam güç gereksinimi: kW makinenin ağırlığı ca.: makinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Travels: X-axis: 210 mm Z-axis: 520 mm Auction-ID: A1-46607-52
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General description CNC lathe WEILER 120 CNC, designed for precision turning operations in toolroom and small batch production environments. Compact and robust German-built machine suitable for prototyping and workshop use. Technical details Manufacturer: Weiler (Germany) Model: 120 CNC Type: CNC / teach-in lathe Control: Siemens SINUMERIK System 3 Tooling system: Multifix quick-change toolpost Working area: Enclosed with splash guard Cooling: Coolant hoses visible Operation: CNC with manual access doors and chip tray Control panel: Screen, keypad, feed/speed controls, emergency stop Application: Precision turning, prototyping, and small series production Equipment - Siemens SINUMERIK System 3 control - Multifix quick-change toolpost - Coolant system - Enclosed working area - Chip tray Condition and remarks Used machine, untested. Shows signs of wear consistent with age but appears co ...
Torna çapı: 400 mm dönüş uzunluğu: 1000 mm yatak sürgü üzerinde sallanma çapı: 400 mm sürgü üzerinde dönüş çapı: 225 mm yatak genişliği: 433 mm mil çapı: 56 mm toplam güç gereksinimi: makinenin yaklaşık 7,4 kW ağırlığı: makinenin yaklaşık 2,8 ölçü ölçüsü: 2,5 x 0,9 x 1,3 mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
5.000 € 
