takım tezgahları için aksesuarlar kullanılmış satılık (1,934)

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 €: 572.81 €: 0.4 - 3.5 mm: 200 mm: 700 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Solder tool holders SK-40 x 20 (different lengths) approx. 120 pieces Suitable for all common machine tools, Fabr. E.G. GEWEFA Condition, scope and design see photo! Packed in steel transport crate Auction-ID: A7-40841-221

: neu : ca. 2 Wochen ab Auftragse : 428.36 €: 100 mm: 32 mm: 135 mm: 13 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 €: 593.63 €: 0.4 - 3 mm: 400 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 €: 1 : 200 x 32 x 32 mm: 1 kW: 2800 1/min: 42 mm: 470 mm: 250 mm: 1050 mm: 60 kgQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVES:Version without suction (Art. 317.762)Version without stand, suction and brake/emergancy push button (Art. 317.774)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Auction-ID: A1-44976-50

Inflatable Tube and Pipe Weld Purging System Auction-ID: A1-41989-116

Brand: TUL Type: CNC Tool Storage Cart (1 wheel that doesn't work) Model: SK50 (ISO50) tool holder compatible Capacity: approx. 20–25 units Manufacture: steel structure + TUL moulded supports in industrial composite Miscellaneous Tools see photo Auction-ID: A3-43497-33325

Travel X/Y/Z 700/1000/600 mm, incl. 1x HP Z200 workstation, 1x FUJITSU monitor, 1x FUJITSU keyboard and 1x HP mouse Auction-ID: A1-44976-267

Consisting of: - Jankens clamps 2 to 14 inches - Pipe set clamp 8 inch Red - Pipe set clamps 2.5 to 4 inches - Pipe set of bucks Auction-ID: A1-41989-97

Auction-ID: A1-44976-46

Storage and transport trolley for SK50 type tool carriers, on wheels. (defective wheels) Sturdy metal frame, multiple storage levels with angled brackets. Equipped with several SK50 tool holders in different shapes (taps, chucks, sockets, etc.). Ideal for mechanical workshop, CNC tooling or machining center. Auction-ID: A3-43497-33327

Mobile metal trolley equipped with approx. 25 SK50 cone tool holders (DIN 69871 standard). The set includes different types of tool holders: ER Clamp Holder Weldon Shank Cutter Holder Tap holders Face milling cutter holders Various adapters and extension cords TUL trolley, in robust construction, on wheels for easy movement around the workshop. Professional equipment from a mechanical workshop, in good general condition, with normal traces of use. Approximate dimensions: L 100 × W 60 × H 120 cm Condition: Used, Functional Note: Sale as is – see photos for exact contents of the lot. Auction-ID: A3-43497-33326

Auction-ID: A7-44984-30

: neu : ca. 2 Wochen ab Auftragse : 571.15 €: 120 mm: 40 mm: 200 mm: 33 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-44976-271

3 UNITS/SETS OF ATT0028 PACKED TOGETHER. A SINGLE ATT0028 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 125 mm, 3000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 190 x 190 x 180 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0028 PACKED TOGETHER: 190 x 570 x h180 mm - 21 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-18

5 UNITS/SETS OF ATT0014 PACKED TOGETHER. A SINGLE ATT0014 CORRESPONDS TO: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0014 PACKED TOGETHER: 250 x 450 x h90 mm - 15 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-9

: gebraucht : 2411 : Çin : 120 €: 1 : 100 mm: 40 mm: 108 mm: 13 kgMINT DURUMU SONDAJ makinesi mengenesi (örnek fotoğraf)Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

4 UNITS/SETS OF ATT0021 PACKED TOGETHER. A SINGLE ATT0021 CORRESPONDS TO: Material: 20CrMnTi, Usage: Suitable for grinding, milling, precision machining, double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 180 x 140 mm; Approx. Weight: 22kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0021 PACKED TOGETHER: 370 x 720 x h140 mm - 88 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-337

4 UNITS/SETS OF ATT0017 PACKED TOGETHER. A SINGLE ATT0017 CORRESPONDS TO: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (150x175 mm, h 50 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 180 x 150 mm; Approx. Weight: 26kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0017 PACKED TOGETHER: 450 x 720 x h150 mm - 104 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-158

3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-41

3 UNITS/SETS OF ATT0033 PACKED TOGETHER. A SINGLE ATT0033 CORRESPONDS TO: Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0033 PACKED TOGETHER: 500 x 1410 x h245 mm - 222 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43155-2