Somunlar için çapak alma ve pahlama makineleri

table-size: 800 x 500 mmworkpiece height: +-30º/510 mmtravel x / y / z: 800 x 550 x 510 mmworkpiece sizes: 1300 x 1000 x 510 mmworkpiece weight: 3.000 kgwire dia.: 0,10-0,33 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mmtable width: 400 mmx-axis: 400 mmy-axis: 300 mmz-axis: 350 mmworkpiece sizes: 900 x 630 x 350 mmvolume: 490 Ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 530 mmy-travel: 600 mmz-travel: 300 mm0: 7 barAir consumption: 70-90 Nl/min.voltage: 120/230V+-5% kVAtotal power requirement: 1,5 kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 1200 mmworking heigth: 1200 mmdepth of chamber: 1200 mmoperating pressure: 6,0 barvoltage: 380 Vweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,40 x 1,70 x 2,70 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping devices hydraulic pneumatic: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 l: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 220 Vweight of the machine ca.: 0,260 tdimensions of the machine ca.: 1,20 x 0,45 x 1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.000 mmy-travel: 800 mmz-travel: 585 mmControl: MAZATROL FUSION 640 M table-size: 2.240 x 750 mmtable weight: 3.000 KgT-slots: 5 x18 width of T-slots: 150 mmdistance vertical spindle / table: 200-785 mmdistance from the column: 880 mmturning speed range - milling: 22 – 6.000 U/mintransmission ratio: 2 spindle taper ISO: 50 spindle drive: 40 HPTorque: 529 NmTools changer: 30 pos.Internal cooling system: 15 barChip coveyor: total power requirement: 59,40 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6.280 X 3.274 X 3.510 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhein iTNC530 rapid traverse: 36 m/min: Random 32 fachtable diameter: 600 mmInternal cooling system: 20-70 barturning speeds: 18.000 u/minTool adapter: HSK A 63 Machine on: 27466 hSpindle hours: 16316 htotal power requirement: 60 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4200x5800 mm-18000rpm spindle-HSK63A-CTS with paper filter band and skimmer-blum laser probe-Tool probe preparation ( without tool probe )-30 positions tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 63 mmsquare edge steel: 55 mmflat steel: 100 x 25 mm: engine: 380 V, 6,3 kW weight: ca. 2.450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 1200 mmz-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• RDS 2.5°x2.5° automatic rotary head• Multi-sensor capability, allowing the use of the following tactile probesworking: ZEISS VAST-XXT, Viscan, DTS, LinenScan, RST-P and RENISHAW SP25, TP6,TP20 and TP200.• Calypso software• Machine precision: PE_E=(3.2+L/250)µm. MPE_P = 3.0 µm. MPE_THP=4.0 µm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 1200 mmz-travel: 450 mmcontrol: 85er 8bit total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.