presler kullanılmış satılık (1,701)

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 €: 1181.25 €: 150 to: 500 mm: 800x400 mm: 900x600 mm: 500 mm: 300 mm: 20 mm/s: 3 mm/s: 4 kW: 2200 mm: 1500 mm: 3000 mm: 5500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € o ...

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

incl. extensive accessories WITHOUT lattice box Pick-up date:10.08 - 12.08 Auction-ID: A1-48584-27

Bending lenght:3000mm Tools and prism included. Auction-ID: A7-48567-1

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 €: 3237.57 €: 400 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3400 mm: 510 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 37 kW: 5750 mm: 2110 mm: 3640 mm: 27760 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 11000 €: 211.2 €: 50 to: fix : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 650 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 €: 2608.2 €: 170 to: 500 mm: 870x500 mm: 1000x600 mm: 600 mm: 300 mm: 110 mm/s: 42 mm/s: 7 mm/s: 70 mm/s: 19 kW: 1500 mm: 1950 mm: 2650 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 €: 400 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4500 mm: 5000 mm: 2600 mm: 24000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHorizontal verschiebbarer Zylinder2.200 mmHydraulisch beweglicher Ständer: 3.600 mmBedienung über Handhebel sowie BedienpanelTisch mit integriertem Zylinder zum anheben des WerkstücksAusrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH(Symbolfoto)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31200 €: 595.92 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1550 mm: 25 mm/s: 2 mm/s: 2400 mm: 1200 mm: 2450 mm: 1960 kgHORIZONTAL MOVABLE CYLINDER 1.050 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 €: 2551.5 €: 300 to: 500 mm: 3.000 x 2.050 mm: 700 mm: 20 mm/s: 2 mm/s: 3100 mm: 3000 mm: 2600 mm: 11500 kg: horizontal verschiebbar : 2050 mm: 1300 mm: 2000 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EB Eccentric Press Type W12 Manufacturer: E. Beutler AG Maschinenfabrik, Willisau (Switzerland) Press force 4.2 t Stroke up to 80 mm Stroke rate approx. 400 strokes/min Mechanical eccentric press in robust industrial design Suitable for stamping, punching and forming of small components Tool holder and protective device available Central lubrication installed According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-48287-1045

Industrial hydraulic press with two columns. Make and model not identifiable in photographs. Equipped with a top hydraulic cylinder and a large capacity steel frame. It has surface wear and oxidation typical of use. It is recommended to check the nameplate to confirm manufacturer, capacity and year of manufacture before sale. Auction-ID: A7-48385-15

: neu : ca. 4 Monate ab Auftragse : Italien : 35400 €: 676.14 €: 40 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 26 mm/s: 9 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 1500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,-Siemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-The data for this ad was cr ...

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 €: 1512 €: 200 to: 500 mm: 2.000 x 1.550 mm: 800 mm: 20 mm/s: 2 mm/s: 2400 mm: 2000 mm: 2600 mm: 4800 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 €: 600 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 700 mm: hydraulisch : 80 mm/s: 6,5 mm/s: 80 mm/s: 750 mm: 280 l: 2 x 11 kW kW: 7600 mm: 2650 mm: 3950 mm: 52500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importser ...

SILMAR hydraulic bending machine model PEL-103. Machine for sheet metal bending. Working length and tonnage to be verified. Status: Working. Equipped with safety light curtains. Approximate dimensions: 2,400 x 1,500 x 2,400 mm (L x W x H). Approximate weight: 3,500 kg. Auction-ID: A7-48385-9

: neu : ca. 8 Wochen ab Auftragse : Italien : 173600 €: 3281.04 €: 200 to: 7 mm: 1350 mm: 800 mm: 250 mm: 18 - 180 mm: 35 - 50 1/min: 900x570 mm: 8 : 110 mm: 410 mm: 820 mm: 22 kW: 1500 mm: 2633 mm: 3950 mm: 20000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorPRICE FCA ITALYThe data for this ad was created  ...

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 €: 1 : 100 to: fix : 1020 mm: 300 mm: 1020 mm: 680 mm: 9 mm/s: 5 mm/s: 10 mm/s: 6 mm: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2275 mm: 2082 kgdemo machine / mint conditionnet price (price for new machine € 19.550,00)2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel AND FOOT PEDALTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live ...

German hydraulic press of 200 tons (2,000 kN). Model HBP 200-2200/2200. Fast lowering speed 500 mm/s. Safety distance 173 mm. Without pit. Suitable for industrial forming, compression and drawing. Auction-ID: A7-48385-75

German hydraulic press of approximately 500 tons. Modernized in 1992. Suitable for stamping, drawing and heavy forming. Working according to the video provided. Auction-ID: A7-48385-76

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of  ...

Bending lenght: 2500mm Tools, prisma included. Auction-ID: A7-48567-2

EB Eccentric Press Type 12/1 Manufacturer: E. Beutler AG Maschinenfabrik, Willisau (Switzerland) Mechanical eccentric press in compact industrial design Adjustable stroke available Table with stops and guides Protective cover mounted Suitable for stamping, punching and forming work Robust cast construction According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-48287-1043

Mechanical Industrial Eccentric Press / Stamping Press for Stamping and Forming Work Large flywheel or drive unit with protective cover Solid steel construction in industrial design Suitable for series production and stamping applications Pneumatic or hydraulic components and lines available Foot control available According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use, dirt and age-related wear present Loading possible for an extra charge and by prior appointment Auction-ID: A1-48287-1041

CERVERA CHV 3006 - Hydraulic bending machine - 1997 CERVERA model CHV 3006 hydraulic folder. Manufactured in 1997. Useful folding length of 3,000 mm. Three-phase power supply 380 V. Equipped with adjustable electric backgauge and front control. Pedal operation. Suitable for boilermaking, metal fabrication and sheet metal transformation. Robust industrial construction for intensive use. Machine available for pre-inspection. Sold in the condition it is in. Auction-ID: A7-48385-74

All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Lot consisting of: Ghielmi - Forming press - 1995 Komage K15 Press Komage K15 Press Giacoletto Hydraulic press CIEM Hydraulic press Hydraulic press 350 Ton Hydraulic press 350 Ton GHIELMI Hydraulic press GATTI PGAS150 Hydraulic press 2000 CARCANO 60TON Hydraulic press Plastic drilling machine Hole filler Grinding machine Grinding machine Grinding ...

CEDISA model PM 30 eccentric press. Nominal capacity: 30 tons. Mechanical press for stamping, punching and sheet metal forming operations. Approximate weight: 1,600 kg. Approximate dimensions: 1,200 x 1,000 x 2,200 mm (L x W x H). Status: unverified. Auction-ID: A7-48385-11

BalTec Radial Rivet Press / Ball Press Machine Manufacturer: BalTec Maschinenbau AG, Switzerland Type: 100 KN KHP ZS 5 Year of Make: 2006 Machine number: 2720 Press force 100 kN (10 t) Stroke 14 mm Suitable for riveting, pressing and forming work Robust industrial design Tool holder and tool package partially available Integrated control and control cabinet CE version According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-48287-1051

Not tested; Auction-ID: A1-48399-79