Hidrolik presler

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeu ...

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 ton Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1992 Operating hours: 19.470 h

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 S Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 t Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1991 Operating hours: 13.296 h Condition: Not tested, Disassembled from a working factory

Nominal pressing force ... 400t Table dimensions... 3100x1500mm Plunger Dimensions ... 3290x1200mm Max. ram stroke ... 460mm Number of strokes ... 10-25/min Control Fagor ... CNC 8055 M Machine weight ... 115000kg The machine is in good condition, possible to test under electricity.

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...

Description: Electric connection: 380VApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 1,000 kg

Description: shrink range 15-63mm max opening 75mm pressure 53.5 Mpa force 500 T 3000W 380V 5585Approx. Onsite Dimension. (l x w x h): 770 x 530 x 1,320 mm, weight approx.: 280 kg

Description: Hydraulic operating pressure: 300 bar Voltage: 380 V, 50 Hz 3 phases 3 KVA Hydraulic oil: Mobil D.T.E 26 Oil: 76 liters Approx. Onsite Dimension. (l x w x h): 2,100 x 650 x 2,350 mm, weight approx.: 1,900 kg

Key data: 63 t

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

pressure: 200 tdistance between columns: - mmstroke: - mmtable surface area: 2000 x 800 mmtotal power requirement: kWweight of the machine ca.: 31 tdimensions of the machine ca.: mDrive power 55 / 4 kWTracking travel 28 mmSafety distance 155 mmTracking travel time 97 msOil filling 1200 litersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EXNER EXSBR 200 hydraulic press YOM 8/1987 Serial No. 10042 Pressure 200 t Table 1800 x 800 mm Power requirement 65 kW Safety distance 195 mm Overtravel 52 mm Run-on time 120 ms Weight ca. 23 t

No. 4105: 1 gebr. Hydraulic riypress Fabr. G + K, type SI 40/50, Bauj. 2000 Accessories: Table 500 x 400 mm Other: Pressure force max. 600 kN Impact stroke 150 mm Weight approx. 4500 kg

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kg

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specification: Fast hydraulics

Laepple Hydraulic Press 750 T Single Action – Table 3000 x 1900mm Excellent condition 4 pcs available

We have for sale 4 pcs of Hydraulic Press 750 T single action table 3000 x 1900 mm Very good condition Under power

Max. pressing force 60 to Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm

CONTROLS  electronic controls PRESS DESIGN  frame design: 4 column PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 800 mmSLIDE  slide force: 400 to  table surface (left-right): 1200 mm  table surface (front-back): 800 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 290 mm/s  working velocity min.: 25 mm/s  return velocity max.: 290 mm/s  return force: 35 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2255 mm  space requirements -front/back-: 1660 mm  t ...

Description: Capacity: 10 tonnes Collection on: 29/04/2024 or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description  ,Approx. Onsite Dimension. (l x w x h): 600 x 1,000 x 2,300 mm, weight approx.: 1,000 kg

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion  ...

closing pressure: 4360 kNtable-size: 730 x 730 mmcontrol: B+R Industrieelektronik draw back pressure: 190 kNajustment speed: max. 60 mm/secreturn speed: max. 90 mm/secdaylight between the columns: 900 mm= vulcanizing press with vertical closing unit, with form removal and form separation deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number 461048 , Operating pressure 80 atMax. pressing force: 4 to, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 2,200 mm, weight approx.: 1,500 kg

Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,300 mm, weight approx.: 2,500 kg

Inv. Num. : 6050 Type: 30T Producer: MEYER Produced: 1982 Parameters: Compressive force: 30 t Distance between frame walls: 300 mm Lifting height: 200 mm

Description: Operating hours: 38162 Press force: 100 tons Ram stroke: 160 mm Table L x W: 450 x 560 mm , Dimensions Press L x W x H: 1,900 x 1,100 x 2,850 mm Control cabinet L x W x H: 400 x 1,000 x 2,000 mm Tool carrier plates L x W: 500 x 1,100 mm Approx. Onsite Dimension. (l x w x h): 1,900 x 3,200 x 2,850 mm, weight approx.: 8,500 kg

Description: Operating hours: 38,360 Pressing force: 100 to Ram stroke: 160 mm Table L x W: 450 mm x 560 mm Press dimensions Press dimensions L x W x H: 1,900 mm x 1,100 mm x 2,850 mm Control cabinet L x W x H: 400 mm x 1,000 mm x 2,000 mm Tool carrier plates L x W: 500 mm x 1,100 mm Approx. Onsite Dimension. (l x w x h): 1,900 x 3,200 x 2,850 mm, weight approx.: 8,500 kg

Hydraulic Press 1300 T force very good condition Under power

Hydraulic Press 800 T Very good condition Under power

Muller Press, hydraulic press force 1000 T, double action, table 2600 x 2250 mm 2 pcs available

Hydraulic Press 400 ton Nominal Power 400 ton Slide Stroke 800 mm Slide dimension 1300 x 1600 mm Table dimension 1300 x 1600 mm Cushion Stroke 350 mm . ELECTRICAL SYSTEM COMPLETELY REBUILT IN 2020

pressure: 63 tdistance between columns: 0 mmstroke: 160 mmtable surface area: 630 x 500 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number 1388Approx. Onsite Dimension. (l x w x h): 1,350 x 700 x 2,400 mm, weight approx.: 1,000 kg

Key data: 1200 t, 4000 mm, 700 mm

Manufacturer | Manufacturer: ONA - Pres Description | Name: PYZT 1200 Year of construction | Year of manufacture: 1990 Adjustable pressing force | Adjustable pressing force: 1200 - 12000 kN (1200 t) max. lifting height | max. Lifting height: 700 mm Table / Plunger Size | Table / ram size: 1600 x 4000 mm

Nominal pressing force: 250 tons Travel: 600mm Daylight: 1200mm Table size: 1000 x 1000mm Hydraulic rejector 63 tons Weight: 8 tons

PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressin ...

Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.

Key data: 1250 t

For sale is a sinking press Sack + Kiesselbach pressure 1250 tons.

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 €: 1340.67 €: 150 to: 500 mm: 1.550 x 2.000 mm: 800 mm: 20 mm/s: 3 mm/s: 2350 mm: 2000 mm: 2500 mm: 4100 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmHORIZONTAL MOVABLE CYLINDER1.000MMHYDRAULICALY MOVABLE STAND 1.300 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 €: 1507.5 €: 150 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 3 mm/s: 2900 mm: 2500 mm: 2500 mm: 5200 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmHORIZONTAL MOVABLE CYLINDER1.450MMHYDRAULICALY MOVABLE STAND 1.600 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 €: 1608 €: 200 to: 500 mm: 2.000 x 1.550 mm: 800 mm: 20 mm/s: 2 mm/s: 2400 mm: 2000 mm: 2600 mm: 4800 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmHORIZONTAL MOVABLE CYLINDER1.000 MMHYDRAULICALY MOVABLE STAND 1.300 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 €: 1849.2 €: 200 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 2 mm/s: 2950 mm: 2500 mm: 2600 mm: 6500 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmHORIZONTAL MOVABLE CYLINDER1.450 MMHYDRAULICALY MOVABLE STAND 1.600 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 107000 €: 2129.3 €: 200 to: 500 mm: 3.000 x 2.550 mm: 800 mm: 20 mm/s: 2 mm/s: 3550 mm: 3000 mm: 2600 mm: 8500 kg: horizontal verschiebbar : 2550 mm: 1900 mm: 2000 mmHORIZONTAL MOVABLE CYLINDER1.900 MMHYDRAULICALY MOVABLE STAND 2.000 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 €: 2686.5 €: 300 to: 500 mm: 3.000 x 2.050 mm: 700 mm: 20 mm/s: 2 mm/s: 3100 mm: 3000 mm: 2600 mm: 11500 kg: horizontal verschiebbar : 2050 mm: 1350 mm: 2000 mmHORIZONTAL MOVABLE CYLINDER1.350 MMHYDRAULICALY MOVABLE STAND 2.000 MMcontrol by levers as well as control paneltable with integrated cylinder to lift the workpieceaccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.