Hidrolik açık boşluk presleri

Pressing force: 8 t Table surface: 450x260 mm Stroke: 250 mm Projection: 175 mm Lifting speed: 3.9 m/min Retraction force: 4,000 kg Engine: 4 hp Weight approx. 1 t

Key data: 10 t, 300 mm, 510 mm

Table 470x460 , installation height 605

Two-hand and foot operation Pressing force: 1000 kN Projection: 380 mm Stroke: 650 mm Distance table/plunger, gr. stroke top, verst. above: 950 mm Ejector with end position damping on both sides Ejector travel: 150 mm Ejector force: 160 kN Pressure piece hardened: Ø 98 mm Table surface: 720 x 630 mm Total weight: 7,400 kg

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973

pressure: 63 tthroat: 500 mmstroke: 150 mmtable surface area: 1000 x 800 mmram surface: 1000 x 800 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of machine L x W x H: 2,0 x 1,08 x 3,01 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 185 mmstroke: 100 mmtable surface area: 380 x 350 mmdayligth: 250 mmtable height over floor: 840 mmtotal power requirement: 4 kWweight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10 t, 300 mm, 300 mm

more info on request

pressure: 30 tthroat: 300 mmstroke: 245 mmdayligth: 360 mmtable surface area: 640 x 540 mmtable height over floor: 800 mmoil volume: 300 lclosing speed: 70 mm/secworking feed: 15 mm/secreturn speed: 200 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: 1,2 x 1,2 x 2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 300, table 450x370, 1300kg

Key data: 1 t, 110 mm

Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit

pressure: 100 tthroat: 320 mmstroke: 160 mmtable surface area: 850 x 550 mmdayligth: 500 mmoil volume: ca. 500 lram surface: 560 x 450 mmtotal power requirement: 30 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,5 x 2,0 x 3,0 mMachine was overhauled in 2008- Workroom enclosure with Sick light barrier- Large ram with ejector and pin clampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 280 mmstroke: 160 mmtable surface area: 560 x 500 mmram surface: 280 x 280 mmdayligth: 400 mmoil volume: ca. 360 ltotal power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,45 x 1,75 x 2,67 m- Workroom enclosure with Sick light barrier- Large ram with ejector and pin clamp- foot switch- Motorized depth stop in the cylinderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Inv. Num. : 4464 Type: PL-F UP Producer: OMC Created: 2014 Parameters: Compressive force: 105 t Under table length: 3500 mm Under-table width: 1300 mm Total power requirement: 3 kW Machine height: 1940 mm Machine length: 4000 mm Machine width: 1600 mm Machine weight: 4 t

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone

Offer 23321 Technical data approx.: - Max. pressure capacity 10 T - Operating pressure min. – max. 15 - 180 bar - Projection 180 mm - Max. installation height 340 mm - Stroke 70 mm - Tool holder 25 mm - Table dimensions W 350 x D 280 mm - Table bore / passage 90 mm - E.- Footswitch - Drive 400 V / 3 kW - Space requirement approx. W 450 x H 1000 x D 800 mm - Space requirement base frame approx. W 450 x H 820 x D 800 mm - Weight approx. 500 kg

pressure: 100 tthroat: 300 mmstroke: 400 mmoil volume: 300 ldiameter of piston: 200 mmpiston speed, rapid traverse: 121 mm/spiston speed, low pressure: 60 mm/spiston speed, high pressure: 9 mm/spiston speed, retracting movement: 117 mm/spiston rod diameter: 140 mmtable surface area: 740 x 580 mmtable height over floor: 900 mmram surface: 600 x 500 mmquantity of oil: 300 ltotal power requirement: 11 kWweight of the machine ca.: 4,9 tdimensions of the machine ca.: 1,0 x 1,76 x 2,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 14 tthroat max.: 220 mmstroke max.: 150 mmtable surface area: 450 x 430 mmpower stroke: 22 mmair pressure: 10 barweight of the machine ca.: kgOverall size: 950 x 1050 x 2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 14 tthroat max.: 220 mmstroke max.: 150 mmtable surface area: 450 x 430 mmpower stroke: 22 mmair pressure: 10 barweight of the machine ca.: kgOverall size: 950 x 1050 x 2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat max.: 250 mmstroke max.: 200 mmdayligth: 475 mmtable surface area: 550 x 500 mmweight of the machine ca.: 2050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat max.: 250 mmstroke max.: 200 mmdayligth: 475 mmtable surface area: 550 x 500 mmweight of the machine ca.: 2050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg