Üretici:
(kategori: 106)
: neu : ca. 4 Monate ab Auftragse : Italien : 89700 €: 1695.33 €: 85 to: 500 mm: 700x400 mm: 800x600 mm: 600 mm: 300 mm: 105 mm/s: 41 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 1200 mm: 1600 mm: 2500 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 2070 kg.range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x re ...
pressure: 30.0 tstroke: 200 mmtable surface area: 775 x 190 mmcolumn travel between the guideways: 775 mmajustment speed: 7.5 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 3.0 kWweight of the machine ca.: 400 kg.dimensions of the machine ca.: 1.500 x 700 x 1.800 mmFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc.,. but also for pressing in and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston can be stopped in any position- Fixed hydraulic tank mounted on the side- Operating instructionsThe ...
pressure: 60.0 tstroke: 250 mmtable surface area: 1040 x 370 (315) mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 4.0 mm/secreturn speed: 10.0 mm/secengine output: 4.0 kWweight of the machine ca.: 800 kg.dimensions of the machine ca.: 1.700 x 700 x 2.100 mmFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc.,but also for pressing in and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston can be stopped in any position- Fixed hydraulic tank mounted on the side- Operating instructio ...
pressure: 100 tstroke: 300 mmtable surface area: 1070 x 315 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1870 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mmFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on t ...
chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 66 tchamfer lenght: 2040 mmdistance between columns: 2364 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDelem CNC controlcontrolled arrestertoolsTechnische Daten / technical details:Druck / pressure 66 toAbkantlänge / bending length 2040 mmDurchgang zwischen den Ständern / distance between columns 2364 mmHub (Y-Achse) / stroke (Y-axis) 200 mmVerfahrweg X-Achse / travel of X-axis 600 mmVerfahrweg R-Achse / travel of R-axis 150 mmGewicht / weight 5700 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...
pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mmEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z R axis)- 1x branded set of upper tools (split)- 1x branded Multi-V bottom die ...
pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...
pahfer uzunluğu: 650 mm plaka kalınlığı: -1.6 mm makinenin ağırlığı yaklaşık 150 kgMakinenin boyutları yaklaşık 2000 x 1000 x 900 mmBu reklam için veriler LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1070 mmpiston stroke: 150 + 60 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 470 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sectable width: 140 mmControl: ELGO NC Number of working hours: ~ 9.600 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2200 kgrange L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours ()Features:- Robust NC-controlled hydraulic press brake- With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left- NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis)- 1x split set of pointed tools - top- 1x rotatable Multi-V die block- Side safety device (swivel doors)+ FI ...
pressure: 25 tstroke: 145 mmdaylight between the columns: 600 x 160 mmdayligth: mm: mmdiameter of piston: mmweight of the machine ca.: 0,15 tdimensions of the machine ca.: 0,8 x 0,6 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Basınç: 30 Boğaz: 250 mm Tabla boyutu: 650 x 500 mm vuruş: 400 mmGünaydınlık: en az 120 / max. 500 mmKontrol: Simatic HMI Touch SiemensToplam güç gereksinimi: makinenin 13 kW ağırlığı ca.: makinenin yaklaşık 3,5 ölçüsüm: 2,5 x 1,70 x 2,85 mKurulum modu ve tek zamanlı çalışma modu 850x500mm destek yüzeyine sahip iki yan masa, ağır iş parçaları için hidrolik küre çubukları ile Bu reklamın verileri LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç: 630 tçap: 320 mmstrok: 310 mmtoplam güç gereksinimi: kW makine ağırlığı yaklaşık: 3500 t makine boyutları yaklaşık: mBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 63 tthroat: yaklaşık 280 mmstrok: 8-100 mmNo. strok sayısı: 60-130 Hub/minram - ayar aralığı: 80 mmMakine ağırlığı yaklaşık: 4,3 tBu ilana ilişkin veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 85 pah uzunluğu: 2750 mmsütunlar arası mesafe: 2260 mmtoplam güç gereksinimi: 17 kW makine ağırlığı yaklaşık: 8.300 kg makine boyutları yaklaşık: 3800 x 2300 x 2400 mmAksesuarlar/ekipman:- TRUMPF TASC 6000- Makinenin önünde 2 destek kolu- LazersafeBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 320 pah uzunluğu: 4100 mmstrok: 350 mmtoplam güç gereksinimi: 32 kW makine ağırlığı yaklaşık: 23.500 kg makine boyutları yaklaşık: 4300x2600x3400 mmBu ilana ait veriler LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 12 tsütunlar arası mesafe: / mmdaylightth: / mmtoplam güç gereksinimi: kW makine ağırlığı ca.: t makine boyutları ca.: mBu ilana ilişkin veriler LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 170 pah uzunluğu: 4050 mmvoltaj: 3x400 V makine ağırlığı yaklaşık: 16300 kgBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2550 mmstroke: 150 mmtotal power requirement: . kVANumber of working hours: . hworkpiece: workpiece: Number of strokes: total power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mBack gauge 400mmThroat 250mmSpeed: 8mm /SkW: 6,5Volts: 380 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Tea ...
basınç: 160 tstrok: / mmstrok: / mmtable-size: / mmtoplam güç gereksinimi: 18,5 kW makine ağırlığı ca.: 13,5 t makine boyutları ca.: mBu ilana ilişkin veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
