Mills

Weight: 70 kg 18,000 rpm

--> Grinding blades in the opposite direction. Suitable--> mill for the processing of spices. 2 drives: 15 KW + 7.5 KW.

Engine 18.5 kW Weight approx. 740 kg On basic frame. Very good condition, like new. This machines is overhauled and in very good condition. You can also get the entire system with all components.

Drive: 30 KW

Used mill Alpine 500.

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel

Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.

Machine in the very good condition, renewed and ready to use. We can offer to you drive and frame specially for your application. You can also get the entire system with all components.

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

Alpine pin mill type 400 Z, burr disc diameter. 400 mm, 18.5 Kw. (engine not available)

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Alpine pin mill Z 400, grinding disc diameter 400 mm, new pin set, without motor

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

Drive system: SIEMENS DS - engine 55 kW,. average rotor diameter: 800 mm Rotation: 3,000 rpm Tools: 96 PCs Grinding gap: 8 - 0.5 mm Air volume: 3,000-3,700 m m²/h Total weight: 2,500 kg Engine data: 55 kW, 3.000 rpm, 400 V, 50 Hz, IP 54 Dimensions approx.: 2,350 X 1,400 X 1,200 (L X W X H) Usage area: Grinding of grain sizes approx. 20-250 µm in 2004, the storage and the engine were renovated and converted the plant to circulating oil lubrication with oil pump and accessories.

Speed: 5.295 UPM, with documentation

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

İt is renewed and good conditions. İt has Speed control(inverter) Panel, İt has feeding Screw and also Painted, Ready to work, İt has straight roller for grinding. İf Customer needs for bricks, We can prepare and change with it. Before manufacturing, we will share design with customer then make it. For Special Design Brick rollers, we will charge 4.500 Euros for 2 rolls Roller Diameter : 400 mm Roller Width : 150 mm Total Machine Weigth :~7.200 Kg

Used mill made by Bucher, type C6. No motor.

Used pelletising machine Bühler model DPAS-660/228. New 1999. Power 200 kW. Additionall several dies. Documentation available.

Reconditioned Christy Turner Pulverizer complete with new full set of ADI liners and hammers installed, the machine has been well maintained and runs like new. Comes with a lot of spare parts including hammers, shafts, spacers, some ADI liners and a completely reconditioned spare main drum complete with mounted bearings.

COMEC Pearl Mill M 8 Stainless steel Double jacket Container capacity 8 l Very good ready-to-use condition, directly from production!

Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.

Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

Drive: 1.1 KW weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills available.

Drive: 1.1 KW Weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills stock.

Dry agent mill Manafacturer: Condux Item no.: 5988 Type: CUM 100 Year of construction: 1992 Power: 1.1 kW with hopper(diameter 330 mm, height: 400 mm) with control cabinet, cable & plug on mobile frame (castors attached) LWH: 850 x 550 x 1550 mm

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!

Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!

Perlmühle Drais PM 5 RL-V Explosion protected version Grinding tank 6 l Agitator power 7.5 kW with feed pump Very good condition, straight from production!

DRAIS bead mill PM25 in sealed design by means of gland packing, vertical design. Grinding media separation by means of friction gap, adjustment on request, grinding vessel made of thick-walled special steel, coolable, stirring discs Vaudit hardened. Main drive 24 kw, pump motor 0.75 kw, protection class EEX e II T3

No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

INSIDE DIAMETER : 1.800 mm, BODY LENGTH : 3.000 mm BALL MILL, IN STOCK, NEW AND 2 YEARS GUARANTEE, STEEL OR RUBBER LINING, MILL HEADS: GGG60 MILL GEAR : GGG80 CENTRAL GREASE LUBRICATION SYSTEM ALL BODY SEATED ON A STEEL CASE, 132 KW ELECTRICAL MOTOR, COUPLING TRANSMISSION, NOTE: FOR PROCESS DESIGN AND SPECIAL DIMENSIONS, PLEASE ASK

Used oscillating granulator made by Frewitt , model: MG-633.

Mobile oscillating and rotating screening mill is used for the gentle comminution of heat-sensitive and difficult-to-process products down to fineness of 250 μm Incl. various accessories (screens, etc.) as well as 1 mobile HOVMAND drum lifting system with battery. Mobile oscillating and rotating sieve mill used for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Incl. various accessories (sieves etc.) and 1 mobile HOVMAND drum lifting system with battery.