SUMITOMO DEMAG satılık ikinci el makine

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-80 / Elektrik Makinası Yapım Yılı: 2009 Enjeksiyon ünitesi: Vida çapı: 25 mm Enjeksiyon ağırlığı: 39 g Püskürtme basıncı: 1580 bar Dozaj hacmi: 44 ccm Sıkıştırma ünitesi: Sıkma kuvveti: 50 t Bağlantı çubuğu aralığı: 370x370 mm Sıkıştırma plakalarının boyutu: 520x570 mm İtici: elektrik Sıkıştırma ünitesi: geçiş kolu Kontrol: NC5 - Dokunmatik Ekran Ek ekipman: Elektrikli makine: yüksek hızlı, enerji tasarruflu ve çok sessiz Avrupa Haritası 67 Robot Arayüzü Hava Valfi x 4 Sıcak yolluklarla kontrol Sertleştirilmiş enjeksiyon ünitesi - Bimetal Merkezi yağlama Vida çapını değiştirmek mümkündür Ölçüm: Ağırlık: 4750 kg Uzunluk/Genişlik/Yükseklik: 4.20x1.26x1.84 m Sürmek: Isıtma kapasitesi: 5,7 kW Sunulan tüm makineler satılmadan önce servis teknisye ...

SIKMA KUVVETI: 250TON MERDANE BOYUTLARI: 930 X 930MM D.B.T.B: 630 X 630MM MIN KALIP YÜKSEKLIĞI: 330MM KALIP AÇMA STROKU: 670MM MAKSIMUM GÜN IŞIĞI: 1380MM EJEKTÖR DARBESI: 200MM VIDA ÇAPI: 50MM ENJEKSIYON BASINCI: 3032BAR STROK HACMI: 530CM3 ATIŞ AĞIRLIĞI (P/S): 482GR KONTROLLER: NC5 VIDALI SÜRÜCÜ: ELEKTRIK HAVA DEVRESI: 4

Sumitomo Demag Systec SP 280/630-840 üretim yılı 2014 280 ton Kelepçe 2800kn Kravat Bar Dist 630 Enjeksiyon ünitesi 840 Schwaig, Almanya'da üretilmiştir 400v 50hz Exworks Güney Amerika

Sumitomo Demag enjeksiyon kalıplama makinesi Systec multi 210 / 580-430h / 200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Sumitomo Demag enjeksiyon kalıplama Systec Wittmann Robot Sumitomo Demag enjeksiyon kalıplama makinesi Systec çoklu 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stroke: 930 mm Between columns: 1000 x 9000mm Tray dimensions: 1450 x 1350 mm Mini / maxi mold: 450/950 mm Max distance between plates: 1880 mm Injection: Screw diameter: 95 mm Screw length: 20D cm3: 3367 Bars: 1895 General: Engine power: 74 kw Heating power: 43 kw Closing weight: 25t Injection weight: 80tonnes Dimensions length: 10.10m Dimensions width: 2.50m Dimensions height: 2.60 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runners, magnetic plate,

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm × 1555.0 mm × 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours – CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year –October 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...