Alt kategori
(3. kategori seviyesi)
Üretici:
(kategori: 106)
Machine number: 473678Delay time: 69 msSafety distance for hand control tool: 110 mmTable dimensions: 700 x 525 mmReference: Walter - Lot 17 Auction-ID: A7-49834-7
with mounted punching toolReference: Walter - Lot 175 Auction-ID: A7-49834-24
A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 350, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are ...
A deposit of €75.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 120, will be invoiced directly to the winning bidder by the team in charge Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-48398-4
Used REIS 4-column hydraulic press / try-out press. 380 V, 50 Hz, serial no. 02037 visible on plate. Large working area, hydraulic unit and control panel included. Condition as shown in photos; capacity and full specifications to be confirmed. Auction-ID: A1-49190-1
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W Auction-ID: A1-40397-159
A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 650x450 mm Slide stroke 20-140 mm Strokes per minute 40-80 Max mould height 400 mm Worktop size 1000x660 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 650, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. T ...
- Four-column hydraulic press for pressing operations with interchangeable tools. - Nominal force 50 T. - Work table 1400 x 1000 mm. - Maximum aperture approximately 1100 mm. - Four-column structure with upper platform for hydraulic group. - Electrical panel with SIEMENS SIMATIC PLC and operator panel. - Photoelectric safety barriers. - It has pressing tools installed. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-6
General Description Mechanical stamping press manufactured by ILR, designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operating modes. Operational st ...
pressure: tdistance between columns: mmstroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Edging tools not included. Machine ready for transport Auction-ID: A1-48649-2
C-Frame construction Die height 850 mm Thickness bolster plate 100 mm Throath C Side 360 mm Ram stroke 500 mm Power 22.5 kW Accrete speed 100 mm/min. Working speed 10 mm/min. Return speed 125 mm/min. Machine ready for transport to be assessed on viewing day Auction-ID: A1-48649-92
machine ready for transport and to be assessed on viewing day. machine has been repaired, see photos Auction-ID: A1-48648-7
stamp size 500x500 mm; left and right movable punching head; table top size 2000x500 mm; maximum punch passage approx. 140 mm; including self-built extension table at the rear; Auction-ID: A1-49001-16
equipped with Sick optical security; stamp size 1630x650 mm; table top size 1630x650 mm; maximum punch passage approx. 160 mm; under pressure surface; Auction-ID: A1-49001-19
equipped with Elemac 600 MTV optical security; stamp size 500x500 mm; left and right movable punching head; table top size 1700x500 mm; maximum punch passage approx. 130 mm; foot control; including feed roller; inclusuf Atom L81 feed roller including table at the back size 1700x600 mm; Auction-ID: A1-49001-17
pressure: 315 tstroke: 20-150 mmram stroke - adjustable min/max: 20 - 150 mmtable-size: 1780 x 1250 mmram surface: 1500 x 1000 mmtotal power requirement: 75 kWweight of the machine ca.: 46 t- Installation height with max. stroke at bottom adjustment at top 500 mm- Passageway in the table : 1200 x 300 mm- Milling in the table : 1300 x 400 x 80 mm- Infinitely variable stroke rate : 20 120 Hübe minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2.500 € 
