planlama makineleri kullanılmış satılık (517)

Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Şu anda size Hundegger'dan bu HM 4 Endüstri planyacısını sunabilirim. ÜCRETSİZ 26 Aralık Hundegger'dan yüksek performanslı uçak! HUNDEGGER'den kullanılmış bir HM 4 planya makinesi HM-400 2008 tüm mekanizasyon HM4 planlama makinesinin sol ve sağında 16 m ahşap uzunluğunda yer alıyor, fotoğraflarda gösterildiği gibi. 4 x 11KW planya motor. 4 x eğim ünitesi. Tam otomatik kesit ölçümü Sahadan görüldüğü gibi, montaj halinde, garanti ve garanti olmadan, sökülmeden satış. Fiyat: net 69.000 euro

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: Spindles: 10 Spindle 1: Bottom / 7.5 kW / 50 mm Spindle 2: Right / 7.5 kW / 50 mm Spindle 3: Left / 7.5 kW / 50 mm Spindle 4: Right / 7.5 kW / 50 mm Spindle 5: Left / 7.5 kW / 50 mm Spindle 6: Top / 11 kW / 50 mm Spindle 7: Bottom / 7.5 kW / 50 mm Spindle 8: Top / 7.5 kW / 50 mm Spindle 9: Bottom / 7.5 kW / 50 mm Spindle 10: Universal / 7.5 kW / 50 mm Working width: 170 mm Working height: 120 mm Feed rate: 60 m/min Feed motor: 15 kW Table: Hard-chromed Condition: Gebraucht Location: Tauberbischofsheim, Germany

Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.

Yapım Yılı: 1980 Çalışma genişliği: 860 mm Çalışma yüksekliği: 250 mm Çalışma yüksekliği 4 taraflı: 230 mm Iğne sayısı: 4 Mil düzeni: u-o-r+l Mil çapı: X-X-50-50 mm Karşı rulmanlar: 1-2 Motor gücü: 11-15-5.5-5.5 kW Çalışma genişliği ayarlaması: manuel Çalışma yüksekliği ayarı: motorlu Besleme: 4 Tablodaki sürülen silindirler: 3 Üst besleme silindirleri: 3 Masa yüksekliği sabiti: yaklaşık 800 mm Ağırlık: 4850 kg Voltaj/Frekans: 380V 50Hz 3Ph

Key data: 4 , 230 mm, 150 mm

Dört taraflı planya Weinig Tip: Q 22 Quattromat Üretim Yılı: 1990 Planyasyon genişliği 230 mm Planlama yüksekliği 150 mm Makyaj masasının uzunluğu 1960 mm 4 şaft: 1 Alt 4 kW Sağda 2 ve 3 sol 1 motor tarafından sürülen 5.5 kW 5.5 kW üzerinde 4 adet Besleme hızı 6 - 22 m/d. Besleme kardanı, besleme motoru 2.2 kW Yağlayıcı pompa kılavuzu Ses geçirmez kaputu ile Planya başları da dahil 2 parça uzunluğu 230 mm 2 parça uzunluğu 150 mm Alt yapı ile ağırlık 1.620 kg Boyutlar 3350 mm x 1450 mm x H 1600 mm

The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: Spindles: 4 Working width: 230 mm Working height: 120 mm Spindle 1: Bottom (5.5 kW) Spindle 2: Top (5.5 kW) Spindle 3: Right (11 kW) Spindle 4: Left (11 kW) Feed: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Kölle planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes an adjustable angle stop and accessories Technical data: Working width: 600 mm Blade system: Z2 strip planing blades Condition: Gebraucht Location: Tauberbischofsheim, Germany

Kölle HA 51 planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes Hemag jointing unit. Technical data: Working width: 450 mm Working height: 100 mm (joining) Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 5–24 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany