Yüzey planlama ve kalınlık makineleri

Price example : FS310PS - New , carbide planer shaft dia. 75mm, thickness planer height: 5 - 240mm: 1900,- net

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Working width: 410 mmNumber of knives: 2 St.Motor output: 4 kW: Streifenhobelmesser turning speeds: 4.600 U/min: Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: • 3-fold combined machine • SURFACE PLANER: working width 400 mm, table length 2010 mm, entrance table length 1010 mm, spindle with 3 knives, tilting fence with dimensions 800 x 120 mm • CIRCULAR SAW: max. saw blade diameter approx. 300 mm, table dimensions 710 x 230 mm • MORTISER: table size 695 x 200 mm, max. longitudinal stroke approx. 240 mm, transversal stroke approx. 120 mm, adjustable table height approx. 250 mmApprox. Onsite Dimension. (l x w x h): 2,010 x 1,700 x 1,380 mm, weight approx.: 900 kg

SPECIFICATIONS: Total length : 2200 mm Width: max. 410 mm 4 planing knives Dressing height: max. 200 mm Installed power 3 KW

Dressing thickness planer Duco ADM 65 comb. Planing width 650 mm Planing thickness 220 mm 2 knives Tersa Wave Articulated Pressure Roller Length dressing table foldable 2300 mm 8.5 hp The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 410 mm, 200 mm, 4 kW

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

Working width: 318 / 295 mmWorking height: 170 mmMotor output: 2,25 kWLength of the planing table: 1300 mmNumber of knives: 3 St.Feed speed: 5,3 m/min.Dust suction hood: 100 mmconnected load frequency: 400 Vmachine weight ab.: 160 kgDimensions (L/W/H): 1150 x 530 x 930 mmThe planer and thicknesser is delivered almost fully assembled.For thickness planing, the same connection is used for suction as for surface planingused. However, this is placed upwards over the storage table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

technical details: - TERSA planer knife quick-change system as standard - Material feed with separate motor and two speeds - Aluminium dressing stop (1200 x 160 mm) with round rod guide - Table adjustment by hand with numeric display (1/10 mm accuracy) - Helical toothed steel feed roller electrical data: - Power drive motor: 5 kW - Rated voltage: 400 V - Rated current: 9 A - Mains frequency: 50 Hz Dimensions and weights: - Length: approx. 2,000 mm - Width/depth: approx. 1,100 mm - Weight: approx. 430 kg Dressing: - Total length of the tables: 2,000 mm - Task table length: 1,034 mm - Working height: 900 mm - Chip removal max. dressing: 5 mm - Dressing stop length: 1,200 mm - Dressing stop height: 160 mm Connection suction: - Suction nozzle - Ø: 2 x 120 mm Installation information: - Space requirement length: 2,000 mm - Space requirement width/ depth ...

Motor power 1.25 kW Power consumption 1.8 kW Shaft speed 6700 rpm Weight 93 kg Connection: 400 V / 50 Hz with integrated filter bag for self-suction

Hombak 630 Dressing thickness planer Planing width 630mm 4 Knife shaft Suction nozzle diameter 180mm 2 feed speeds Thickness planer height 220mm 2 rollers in thicknessing table Professional dressing fence Planer Knife Adjustment Gauge Motor 5.5kW 400V 50Hz Motor for feed 2kW 400V 50Hz G&2969

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

JPT-410 Dressing thickness planer 410mm Planer width:410mm Planer Shaft:3-Strip Knife Shaft Motor power: 400V 4 KW Passage height: 3-225mm G&JET-10000295T

Width 510 mm 4 knives Neat, works You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Key data: 63 mm, 22 mm

A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are excluded. You can find our terms and conditions on our websit ...

max. ram stroke: 230 mmthroat: 230 mmtable diameter: 0 mmare offered :2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 12501x overhauled new1x has to be overhauled.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Description: • 5-fold combined machine • Serial number KK/072448 • SURFACE PLANER: working width 350 mm, table length 1910 mm, spindle with 3 knives, spindle speed 5300 rpm, motor power 4 KW • THICKNESS PLANER: working width approx. 350 mm, table length 780 mm, maximum working thickness approx. 240 mm, feed speed 8 m/min • DRILL: maximum drill diameter 16 mm, table is missing • SLIDING TABLE SAW: max. saw blade diameter approx. 315 mm, shaft rotation speed 4000 rpm, carriage length 1900 mm, with saw scoring unit, tilting saw 0°- 45°, motor power 4 KW • SPINDLE MOULDER: spindle diameter 50 mm, max. tool diameter under the table 210 mm, max. tool diameter to tenon 275 mm, 4 speeds: 1400/3500/6000/8000 rpm, motor power 4 KWApprox. Onsite Dimension. (l x w x h): 2,000 x 2,600 x 1,200 mm, weight approx.: 800 kg

max. ram stroke: 350 mmthroat: 650 mmtable diameter: 750 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 350 mmthroat: 650 mmtable diameter: 750 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planer RM Group SP 520 Working width 520mm Table length 2900mm 4 knife shaft Traditional knives Power 5.5kw CE Certificate Weight 820kg Year 2008

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

Planer SCM F520 Class Working width 520mm Electric planing height adjustment 4-knife shaft Traditional knives Sampler adjustable at an angle of 45 Worktop length 2990mm Extraction connection 115mm Motor power 4kw

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2040×410 mm Thicknessing table size 960×410 mm Working height 4 - 225 mm 2 feed speeds 8 - 14 m/min Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 1,250 mm, weight approx.: 690 kg

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2130×515 mm Thicknessing table size 960×515 mm Working height 4 - 225 mm 2 feed speeds 9 - 14 m/min Approx. Onsite Dimension. (l x w x h): 215 x 1,100 x 1,250 mm, weight approx.: 820 kg

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

Weibert ADH 26C Dressing thickness planer Dressing table (LxW): 1120 x 275 mm Thickness table (LxW): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max. chip removal 3 mm Max. planing width 258mm Planer shaft diameter: 70 mm Planer Knife 3 Speed 5200 1/min Feed rate 5.5 m/min Motor: 1.7 kW 400 and in 230V Suction nozzle diameter: 100 mm Weight 170 kg G&STÜ-5904026 relkm23 Optional 400V G&STÜ-5904027

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Weibert ADH 31C Dressing thickness planer Dressing table (LxW): 1295 x 325 mm Thickness table (LxW): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max. chip removal 3 mm Planer shaft diameter: 70 mm Max Planer Width 308mm Planer Knife 3 Speed 5200 1/min Feed rate 7 m/min Motor: 2.2 kW 230V Suction nozzle diameter: 100 mm Weight 210 kg G&STÜ-5904031 relkm Optionally with 400V G&STÜ-5904032

Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Weibert FS32 Dressing thickness planing machine Dressing thickness planer FS32 with spiral knife shaft Weibert FS32 Planer width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 OPTIONS AT EXTRA COST: Slotted hole drilling device Wescott chuck 0-16mm Driving device Dressing table extension adjustable 750mm

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Weibert FS 32 Dressing-thickness planing machine Dressing table length of 1500mm Planing width of 320mm Motor 3KW (4HP) S1 100% continuous load operation Max. chip removal of 5mm Dual folding system of the tables to the rear with spring support Thickness height from 4-225mm 3 Automatic planer knife shaft Feed speed. from 8m/min. Table dimension of the thickness table 700x316mm Weight approx. 420 kg Machine tables and aggregate made of cast iron WJ-300100 mreE The following options are available at an additional cost: Engine 4.0 KW (5,5 HP)S1 100% WJ-300103 Wescott Chuck 0-16mm WJ-300102 Slotted hole drilling rig FS 32 WJ-300101 Professional planing stop FS 32 WJ-300104 Side planer stop WJ-300105 Planer knife 320 HSS G&WJ-BA-320-HSS PLEASE INQUIRE ABOUT SPECIAL PRICES!

Weibert FS32 Dressing thickness planer Planer width: 320mm Planing shaft: 3-reversible knife shaft Motor power: 3KW n=4500U/min, 400V Passage height: 4-225mm Side stop WJ-300100 OPTIONS AT EXTRA COST: Professional dressing stop Long-hole drilling equipment Wescott Chuck 0-16mm Driving equipment Digital height adjustment Dressing table extension adjustable 750mm Drive motor 4KW S1

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

JPT-310 Dressing-thickness planing machine Planer width:310mm Planer shaft:3-strip knife Engine Power:230/400V 4.7 HP Passage height:3-225mm G&JET-10000290T