Üretici:
(kategori: 108)
Container Rotating Device incl. foot switch and remote control Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed speeds infinitely variable 0 - 1745 mm/min Wheel diameter 305 mm Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Dimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50084-112
Heavy-duty RÖWAC CH 500 industrial welding power source with separate wire-feed unit, MIG/MAG welding torch, connection cables and hoses, mounted together on a mobile steel trolley. Specifications: Manufacturer: RÖWAC Model: CH 500 Type: Industrial MIG/MAG welding machine Welding current range: approx. 60–500 A Maximum welding current: 500 A Duty cycle: 60% at 500 A / 100% at 390 A (as indicated on rating plate) Open-circuit voltage: 80 V Input supply: 3-phase, 400 V, 50 Hz Input current: 32 A Input power: approx. 23 kVA Cooling: forced air CE marked Equipment visible / included: RÖWAC CH 500 welding power source Separate wire-feed unit with wire spool mechanism MIG/MAG welding torch Welding and connection cables Cooling/gas hoses Industrial 3-phase power connection Mobile heavy-duty steel trolley Auction-ID: A7-50083-21
Workstation - Hole diameter: 28mm - Grid 100 x 100mm - Sidewalls 150mm - Panel thickness 10mm Table length 1200 mm Table width 800 mm Table height 980 mm Payload kg Machine weight approx. 0.95 t Auction-ID: A7-50084-10
10 pcs quick-release clamping bolts for 28mm system Clamping range from 5 to 50mm Quantity: 10 pcs. Clamping range 15 - 50 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-50084-218
Welding turntable with - Quick-release chuck 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable Table diameter 180 mm Table load horizontal 10 Kg Table load vertical 5 Kg Chuck diameter 65 mm Speed 2 - 20 infinitely variable Swivel range 90 degrees Tilt adjustment: manual/mechanical manual Connection voltage 230 V Machine weight approx. 18 kg Space requirements approx. 300 x 300 x 300 m Condition: never used / new (5) Auction-ID: A7-50084-53
Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic Bolt 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Number 77 Lots Weight 146 kg Condition new Hole diameter 28 mm Auction-ID: A7-50084-204
Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-50084-132
Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-50084-118
Mobile Welding Lift Table/Perforation Table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-50084-72
Roller trestle - Self-aligning - Left/right rotation - New control system - Foot pedal - Emergency stop facility Lifting capacity 20 t Workpiece diameter 1500 - 3500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1400 mm/min Total power requirement 0.75 kW Machine weight approx. 2.5 t Dimensions LxWxH 2.5 x 1.5 x 1.5 m Auction-ID: A7-50084-5
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 840 - 890mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 1200 mm Table width 800 mm Table height 840 - 890 mm Machine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-50084-51
MAG welding machine with: Hose package 3m Welding current max. 250 A Connection voltage 400 V Weight 170 kg Dimensions LxWxH 700 x 450 x 750 mm Condition: unchecked (6) Auction-ID: A7-50084-211
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of delivery Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-50084-96
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-50091-330
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 400 amp welding current transmission Table length 400 mm Table width 400 mm Table load 0.2 t Table diameter 400 mm Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 100 kg. Vertical Total power requirement 220 kW Machine weight approx. 0.065 t Space requirement approx. 0.56 x 0.42 x 0.46 m Condition: never used / new (5) Auction-ID: A7-50084-55
5 pcs screw clamps for hole diameter 28mm Projection max. 245mm Handle made of aluminium see pictures Condition: never used / new (5) Auction-ID: A7-50084-182
Welding table / straightening table - Panel thickness 80mm - Panel thickness incl. frame 360mm Table length 4900 mm Table width 1300 mm Table height 980 mm Machine weight approx. 5.6 t Dimensions L x W x H 5.0 x 1.3 x 0.6 m Auction-ID: A7-50084-34
Siegmund Workbench Perforated plate made of high quality steel S355J2+N + plasma nitriding - 16 mm bore - Holes in 50x50 mm increments - Material thickness approx. 12 mm - Height adjustable from 800 to 975 mm - Frame made of aluminium profiles Table length 1200 mm Table width 800 mm Table height 800-975 mm Table load 250 kg Machine weight approx. 108 kg Dimensions L x W x H 1.2 x 0.8 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-175
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission 250 amps Table diameter 450 mm Table load 300 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Dimensions approx. 0.66 x 0.45 x 0.48 m Condition: never used / new (5) Auction-ID: A7-50084-64
Set 4: 110 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 30 x 160511 Magnetic Bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-50084-159
Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, on a natural, bio-based 2 pcs welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-50084-209
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories are not included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Accessories on the table and pallet truck are not included Condition: never used / new (5) Auction-ID: A7-50084-43
10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-50084-213
TEKA filter device filtoo , Volume flow 2500 m3/h Total power requirement 1.1 kW Machine weight approx. 80 kg Space requirement approx. 0.58x0.58x0.58 m Condition: never used / new (5) Auction-ID: A7-50084-157
Centrifugal fan technical data see pictures Auction-ID: A7-50084-123
Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Technical data: Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Auction-ID: A7-50084-129
Welding helmet Protection level 9 -13 m Power supply 2 x CR2032 Weight 460 grams Dimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-50084-167
Welding-turning-tilting table - Remote control - Welding current transmission max. 500 amps - Face disc passage 80mm Table diameter 650 mm Table load 600 kg Swivel range 90 degrees Speed 0.2 - 3.0 rpm Total power requirement 0.55 + 0.4 kW Machine weight approx. 0.28 t 0.85 x 0.75 x 0.75m Documentation in English. Condition: never used / new (5) Auction-ID: A7-50084-216
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-50084-88
Welding turntable with - Quick-release chuck 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable Table diameter 180 mm Table load horizontal 10 Kg Table load vertical 5 Kg Chuck diameter 65 mm Speed 2 - 10 rpm Swivel range 90 degrees Tilt adjustment: manual Connection voltage 230 V Machine weight approx. 15 kg Space requirement approx. 400 x 400 x 400 mm Condition: never used / new (5) Auction-ID: A7-50084-82
2.600 € 
