WEEKE satılık ikinci el makine

Özellikler: İş parçası uzunluğu: min 200 mm İş parçası uzunluğu: maksimum 2500 mm İş parçası genişliği: min 70 mm İş parçası genişliği: maksimum 850 mm İş parçası kalınlığı: min 12 mm (düz işleme için) min. 16 mm (yatay işleme için) 60 mm İş parçası ağırlığı: maks. 30 kg Eksenlerin hızı: Vektör hızı X/Y = 30 m/dk Z = 15 m/dk Özellik: İş Parçası Belge Alanı İş parçaları için makaralı konveyör vasıtasıyla mekanik destek. İş parçası kaldırma alanı İş parçaları için makaralı konveyör ile mekanik destek Matkap Dişlisi V8 Besleme stroku Z yönü: 60 mm Delme derinliği: maksimum 38 mm Dönme yönü: sağ sol Hız: 2800 1 / dak, frekans kontrollü Tahrik: 1,8 kW Matkap ucu tutucusu: d = 10 mm Hızlı değiştirme sistemi Toplam matkap ucu uzunluğu: 70 mm Matkap çapı: maks. 35 mm ...

WEEKE BHX055 takım değiştiricili dikey işleme merkezi Türü: Hafta BHX 055 Çalışma saatleri: 4.340 saat Özellikler: Delme, frezeleme ve testere ile kesme için CNC kontrollü işleme merkezi ve 4 katlı takım değiştirici Eksenlerin çalışma aralığı: min. 200 70mm, maks. 3.050 850mm çalışma kalınlığı: 12-60 mm Max. Parça Ağırlığı: 35 KG Beslemek: X, Y: 50 m/dak Z: 15 m/dk Delme V13: Ayrı ayrı kontrol edilecek inchXinch yönünde üst tarafta dikey delme için 5 delme mili Üst tarafta inchYinch yönünde dikey delme için 4 delme mili ayrı ayrı kontrol edilir 4 Ayrı ayrı kontrol edilecek inchXinch yönünde üst tarafta yatay delme için delme mili Ayrı ayrı kontrol edilecek inchYinch yönünde üst tarafta yatay delme için 2 matkap mili Değirmen: HSK63 dahil 1 freze motoru - motor gücü 5 KW-S1 (1.250 / 2 ...

Özellikler: İş parçası uzunluğu: min 200 mm İş parçası uzunluğu: maks 3050 mm İş parçası genişliği: min 70 mm İş parçası genişliği: maksimum 850 mm İş parçası kalınlığı: min 12 mm (düz işleme için) min. 12 mm (iki enine kenarda ve üst kenarda yatay işleme için), Not: Alt kenardan yatay olarak delme yaparken, merkezi delmeye yalnızca 19 mm'lik bir iş parçası kalınlığına kadar izin verilir. 60 mm İş parçası ağırlığı: maks. 30 kg Eksenlerin hızı: Vektör hızı X/Y = 50 m/dk Z = 15 m/dk Özellik: İş Parçası Belge Alanı İş parçaları için makaralı konveyör vasıtasıyla mekanik destek. İş parçası kaldırma alanı İş parçaları için makaralı konveyör vasıtasıyla mekanik destek. Matkap dişlisi V13 Besleme stroku Z yönü: 60 mm Delme derinliği: maksimum 38 mm Dönme yönü: sağ sol  ...

Teknik Detaylar: - X ekseni çalışma alanı: 3130 mm - Y ekseni çalışma alanı: 1250 mm - Çalışma Masası Podu ve Ray - Ana Elektromil gücü: 9 KW - Kontrol edilen eksen sayısı: 4 eksen - Toplam delme mili sayısı: 12 - Toplam takım değiştirici pozisyon sayısı: 8

Key data: 3250 mm, 1250 mm, 125 mm

Konsol tablalı 4 eksenli makine, X'te 6 destek manuel olarak hareket ettirilebilir, Konsol başına 2 vakumlu bardak, Vakum pompası 100m³ / h Şablonlar için vakum bağlantısı Vantuz konum göstergesi için LED ekran Çalışma aralığı X: 200 – 3250 mm Çalışma aralığı Y: 70 – 1250 mm Çalışma aralığı Z: 12 – 125 mm (geçiş 150 mm) 19 dikey delme mili 4'ü X yönünde ve 2'si Y yönünde olmak üzere 6 yatay delme mili. Döner yivli testere 90 Freze mili 12 kW'dan 24000 rpm'ye kadar, C ekseni 360 enterpolasyonlu, sıvı sirkülasyon soğutmalı – WZW 14 vitesli arka ve 14 vitesli yan sağ alma alanı Adaptör üniteleri: -Kilit kutusu, üfleme nozullu 2 iğ -Flex 5 testere, delme, freze ünitesi -4 milli çaprazkafa Takım değiştirme yardımı ön sağ TFT 17" ile POWERCONTROL PC 85T'yi kontrol edin WoodWop 5.0, MDE ve üretim listesi yaz ...

Key data: 2500 mm, 1000 mm, 80 mm

Girişte kirpi tamponu bulunan Weeke BHX 500 30 tampon yeri olan kirpi tamponu, toplam uzunluk: 5700 mm Etkili genişlik: 2000 mm Manuel olarak hareket ettirilebilir Üstte ve altta bir işleme desteğine sahip Weeke işleme merkezi Otomatik iş parçası besleme ve konumlandırma özelliğine sahip yerleştirme tablası İŞ PARÇASI BOYUTLARI min. iş parçası uzunluğu: 200 mm iş parçası uzunluğu: 2500 mm Min. iş parçası genişliği: 70 mm iş parçası genişliği: 1000 mm Min. iş parçası kalınlığı: 4 mm iş parçası kalınlığı: 80 mm iş parçası istifleme: 2 adet. Makine Konfigürasyonu: 2V32 YÜKSEK HIZ 7500 Dikey delme ünitesi, üst ve alt işleme desteği, her biri 32 delme mili (ayrı ayrı kontrol edilebilir) değişken hız aralığı). 2H8X/2Y Üstte düzenlenmiş yatay delme ünitesi ve 10'dan fazla ile daha düşük işleme deste ...

CNC kontrollü delme, yapıştırma ve düellolu yerleştirme makinesi 3 kontrollü eksen sayesinde mobilya konektörlerini delmek için de uygundur Çalışan makinenin bir videosu istek üzerine gönderilebilir. Çalışma genişliği maks. 1250mm, çift kişilik kullanım için 600mm pnömatik merkez durdurma ile 4 pnömatik iş parçası kelepçesi 3 ayrı ayrı geri alınabilen matkaplı yatay delme ünitesi, motor gücü 1,5kW 3 ayrı ayrı geri alınabilen matkaplı dikey delme ünitesi, motor gücü 1,5kW X ekseni, Y ekseni, Z ekseni cnc kontrollü Sonuç olarak, farklı malzeme kalınlıkları arasında hızlı değişiklikler mümkündür. Dübel uzunluğu 30 ve 35mm, şu anda 8x30mm'ye ayarlanmış Ahşap dübeller için titreşimli konveyör Tutkal izleme Tutkal miktarı elektronik olarak ayarlanabilir Çift diyaframlı pompa ile tutkal beslemesi Endüstriy ...

CNC işleme merkezi HAFTALIK Türü: BHC 280 Woodwop 5.0: Yıl: 2005 4 Eksen

Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.

CNC processing centre Brand: Weeke Type: Optimat BHC 655 Year: 2004 - axis movement (X-/Y-/Z-direction) via a compact linear guide system, dust-protected - ball screw spindle (Y- and Z-direction) and rack and pinion drive (X direction) Software: WOODWOP, machine data acquisition, provision of teleservice BASIS-table basic equipment 6 traverses 1 low-maintenance vacuum pump with 100 m³/h output 6 traverses, continuously adjustable in the X direction 4 program-controlled workpiece stops, mounted as a rear row of stops 6 program-controlled workpiece stops, mounted as a front row of stops 2 side stops mounted on an aluminium profile in Y-direction, which can be switched off manually when oversized workpieces are being processed. The side stops can be adjusted manually in Y-direction. 6 workpiece lifting arms for heavy workpieces Milling spindle HSK 9 kW (S6 50%), l ...

There is a milling line for lock and hinge available, line includes (1) lock and hinge milling machine, with top/ bottom handle hole unit, lock case milling and drilling machine (2) shifting and aligning unit (3) hinge machine with right and left turning miller and drilling aggregates, max. work piece dimensions: 3000x1350x72mm, speed: 50s/workpiece, length: 13,505mm, width: 4456mm, including documentation, available in March 2023.

CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...

Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x-axis: 9 pieces, drilling spindles vertical ...

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle type: individually controllable 1128 - horizontal drilling gear with 4 spindles in X-direction 1129 - horizontal drilling gear with 2 spindles in Y-direction 1012 - Grooving ...

Description: • CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx. 18 KW • Useful working area approx. 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 7.50 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1.50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h  ...

Description: • CNC machining centre • Serial number 0-250-06-2992 • Total installed power approx. 18 KW • Useful working area approx. 3250 x 1300 mm • Travelling way X-axis: 3955 mm, Y-axis: 1685 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 9 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit to groove • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 11 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Software Windows / HOMAG WOODWOP • Remote control panel • 6 consoles with 22 vacuum suction cups in total • 5 lifting modules for heavy workpieces • BECKER KVT 3.100 ...

Description: X axis work area 2500 mm Y axis work area 1000 mm Max panel passage 80 mm No. collets 2 Automatic panel stacking system , With Motorised transfer BORING UNITS 1 Unit : top Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 BORING UNITS 2 Unit : bottom Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM ROUTER SPINDLES 2 Unit : bottom No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM GROOVING UNIT 1 Unit : top Unit : with 0 / 90 degree positioning Max. tool diameter : 125 mm r.p.m. : 7500 RPM GROOVING UNIT 2 Unit : bottom Unit : with 0 / 90 degree positioning Max. tool di ...

Description: Type of work Drilling Routing X axis working area 4250 mm Y axis working area 1500 mm Working Table Pod and Rail Main Electrospindle power 11 KW Number of controlled axes 4 axes Total number of drilling spindles 25 Total number of tool changer positions 26 X axis work area 4250 mm X axis travel 5050 mm Y axis work area 1500 mm Y axis travel 2150 mm X axis movement speed 80 m/min Y axis movement speed 60 m/min Z axis movement speed 20 m/min No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 10 Pod Position Indicators yes Vacuum pump yes No. pumps 2 Single capacity 100 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 25 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 4 Motor power : 11 kw r.p.m. : 24000 RPM Grooving unit 1 GROOVING UNIT 1 Unit : top Grooving unit : yes Unit : Fixed for Grooving in X Max.  ...

Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT Aggregates: HSK63 LOCK CASE, D=16 MM, 2 SPINDLES, HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with variou ...

Description: WEEKE BHX055 vertical machining centre with 4-fold tool changer Operating hours: 4,340 hours Technical Data: CNC controlled machining centre drilling, milling and sawing & 4-fold tool changer Net working area: min. 200x70 mm, up to max. 3,050x850 mm Thickness of workpiece: 12-60 mm Weight: Max. 35 kg  , Speed: X, Y: 50 m/min Z: 15 m/min  , Drilling V13: 5 Drill spindlesfor machining the top of workpiece in 'X direction'. All 5 drills can be controlled individually 4 Drill spindles for workpiece machining in 'Y direction'. All 3 drills can be controlled individually 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 drills can be controlled individually 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 drills are individually controllable  , Free aggregate: 1 Free aggregate with HSK63 q ...

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen ...

Working dimensions 2750 x 1220 mm (X,Y) Main spindle 6 kW Drills 12V, 2+4 H Grooving saw 100mm in X axis Tool tray 6 places woodWOP 5.0 software CNC Simulator The machine had a regular service Laser cross for placement of suction cups Incl. documentation and backup SW

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

Üretici: Weeke, Tip: BP 140 Optimat, Yıl: 1997, Kontrol: Woodworp, Çalışma aralığı X: 3600, Çalışma aralığı Y ekseni: 1200, Çalışma aralığı Z: 150, C ekseni: evet, Freze mili sayısı: 1, Freze motoru 1 saat güç: 7,5, rpm 1): 24000, Takım değiştirici sayısı: 12, Dikey matkaplar-X: 10, Dikey matkap Y: 10, Yatay matkaplar-X: 4, Yatay matkap Y: 2, Travers tablası: evet, Vakum pompaları m³/h: 160, Takım sıkma sistemi: HSK 63, Testere ünitesi: evet, CE İşareti: evet, Yıl :1997

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.