Enjeksiyon kalıplama makineleri

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery un ...

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Key data: 1000 kN

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...

Now fully refurbished is this Arburg 420C 1000-350 injection moulding machine. This machine was manufactured in 2005 and is fitted with the ever-popular Selogica controller. It’s fitted with a 40mm diameter screw which gives a maximum shot weight (PS) 153g and single air blast. This machine comes with it’s own anti-vibration mounts and the original operators manual. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on r ...

Key data: 1000 kN

Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot Interface Hydraulic Core Pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1000 kN

Arburg 420C 1000-350 / Very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit : Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 10 Injection unit hardened - Bimetal The machine is integrated with the original Arburg conveyor belt Built-in sorting flap Metrics: Weight: 3430 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pumps/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests  ...

Key data: 1300 kN

Arburg 420C 1300-675 with the Star sprue picker Year of construction: 2002 Injection unit: Screw diameter: 50 mm Spray weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Size of clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - Bimetal Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Covers from the operator's side open automatically Metrics: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possib ...

Key data: 800 kN

Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Metrics: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live tec ...

Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of construction: 1999 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Control with air valve Core Pull Control Injection unit hardened - Bimetal Metrics: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On re ...

Key data: 1000 kN, 131 g/PS, 35 mm

Arburg 4220C-1000-290 (208) General information Product Code: 208 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 131 g Clamping Force: 1,000 kN Condition: Used Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 420 x 420 mm Platen size: 570x 570 mm K8sbfm2u Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 46 kW Working hours: 87.026 h Weight: 3740 kg Dimensions: 4.4 x 2 m Core pull: Yes Euromap: Yes

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Arburg 420C-1300-350 (172) with challenge tape Item number: 172 Availability: In stock Year of construction: 2004 Brand: Arburg Specifications Spray weight: 243 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 1360 bar Spar spacing: 420 x 420 mm Clamping plate size: 605x605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 81,110 h Weight: 4080 kg Dimensions: 4.4x1.9 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Key data: 1300 , 177 , 40

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

Key data: 1500 kN

Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Parallel Movements The vertical injection unit - screw diameter fi 25 mm (49 g/PS) It is possible to change screw diameters in both injection units for the screw diameters recomm ...

Key data: 1500 kN

Arburg 470C 1500-400 with the Wittmann W721 robot Year of construction: 12.2006 Injection unit: Screw diameter: 40 mm Spray weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of construction: 2006 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 4900 kg Length/Width/Height: 4 ...

Key data: 1500 kN

Arburg 470C 1500-675 Year of construction: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Parallel Movements Metrics: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1500 kN

Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Operating hours: 7,788 h in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Pneumatic Core Pull x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker at an additional cost It is possible to buy the machine with another robot It is possible to buy a Moretto raw materi ...

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP

Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes

Key data: 1000 kN

Arburg 470H 1000-800 e² with the Wittmann W821 robot / Hybrid machine / Operating hours: 16,458 h in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 55 mm Spray weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 16,458 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by the servo motor, which is controlled by an ...

ARBURG 470H-1000-190 -Clamping force : 100 ton -Screw diameter : 30mm

Key data: 1000 kN

Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of construction: 2012 5-axis robots: 4 axes ...

Key data: 1300 kN

Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating c ...

Key data: 1300 kN

Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heatin ...

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Ref. no.: 18273Hersteller: ARBURGYear of construction: 2008Clamping unitClamping force: 200 tonOpening stroke: 650 mmDistance between tie bars: 520 x520 mmMould height min.: 250 mmOpening width: 900 mmPlaten size (h x v): 728 x 728 mmInjection unitScrew diameter: 55 mmInjection volume: 474 cm³Shot weight: 434 gInjection pressure: 1650 barMeasurements and weightDimensions: 5.45 x 1.8 x 2.1 mMachine weight: 7150 kg

Ref. no.: 18271Hersteller: ARBURGYear of construction: 2005Clamping unitClamping force: 200 tonOpening stroke: 650 mmDistance between tie bars: 520 x 520 mmMould height min.: 250 mmOpening width: 900 mmPlaten size (h x v): 728 x728 mmInjection unitScrew diameter: 55 mmInjection volume: 474 cm³Shot weight: 434 gInjection pressure: 1650 barMeasurements and weightDimensions: 5.45 x 1.8 x 2.1 mMachine weight: 7150 kg

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

Key data: 2000 kN

Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: 2008 5-axis robots: 3 axes ar ...

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Size of clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot Interface Air valve x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorised service company Arburg in the United States. Metrics: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the se ...

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Manufacturer: Arburg Type: 570 C 2200 - 1300 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 2200 kN Tie bar spacing: 570 mm x 570 mm Plate size: 795 mm x 795 mm Tool height: min. 300 mm Opening distance: 650 mm Max distance between plates: 950 mm Screw: 60 mm Stroke volume: 664 ccm / 607 gram PS Injection pressure: 1450 bar General Motor: 55 kW Heating: 23 kW Dimensions: 6 m x 1,7 m x 2,1 m Weight: 8000 kg Screen text: German Additional equipment: Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.

Key data: 200 kN, 72 g/PS, 30 mm

Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions(m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x Hydraulic Core Pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm

Key data: 2000 kN

Arburg 570C 2000-150/60 / 2K machine Year of construction: 2003 Injection unit: Screw diameter: 35 mm Injection weight: 97 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot Interface Hydraulic Core Pull x 2 Hot runner control x 12 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 18 mm Machine with 1 cylinder/battery with compressed nitrogen (extra charge for fast working) It is possible to install a turntable in the machine - at an additional cost Metrics: Weight: 8000 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 30 kW Heating capacity: 9.4 + 3.2 kW Total power: 42.6 kW All offered machines are started by ou ...

used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units - Control extension f. special signals - Interface coloring ( unit 1 u. 2 ) - interface vacuum valve B797ctcwes - additional heating control circuits for nozzle and nozzle tip - 12 electrical he ...

CLAMPING FORCE: 200TON PLATEN SIZES: 795 X 795MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2470BAR STROKE VOLUME: 286CM3 SHOT WEIGHT (P/S): 240GR CONTROLS: SELOGICA MOTOR: 30KW HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC CORE PULLING: 1 AIR VALVES: 1

Key data: 2000 kN

Arburg 570E 2000-800 with the Sepro Industrial Robot 65 sprue picker / Electric machine / Operating hours: approx. 3,500 h in automatic mode Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 3,500 h in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 2 Air core on solid plate side x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Central lubrication Parallel Movements Sprue Picker Sepr ...

Key data: 2000 kN

Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Hot runner control x 15 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit  ...

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W843 robot / Operating hours: 23,897 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 23,897 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed  ...

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed  ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of construction: 2012 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Injection pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tie-Bars Euromap 67 Robot Interface Air valve x 3 Hydraulic core pull x 3 Hot runner control x 12 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Original Arburg tool crane Metrics: Weight: 6500 kg Length/Width/Height: 1.97x1.69x3.40 m  ...