We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Yuvarlak masa freze makineleri DMG MORI MILLTAP 700

metal çalışma makineleri / freze makineleri / Yuvarlak masa freze makineleri

TOP
Seller

Üretici: DMG MORI

model:MILLTAP 700

Makine türü: Yuvarlak masa freze makineleri

madde-No: 167488093

miktar: 1

tarih: 20.02.2026

yer: Land-de Almanya

fiyat:


Seller-item-No.:065347


General
Highly productive compact machining centres; Control: Siemens 840D solutionline
Technical Data
Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Miscellaneous
Clamping System MAS 403 - 45°
Floor space/Weight
Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
Weight approx. 4100 Kg


Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
Table Table surface 840 x 420 mm
Maximum load (table centre) 300 Kg
Slot width 14 mm
Number of Slots 2
Clamping grid M 12, 100 x 100 mm
Tool clamping for BBT 30 (Big+) Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°
Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
Nano package Nano package Improved temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle. Without SW-Package Mdynamiks (C-H0020)
Production package aluminium band filter ICS 40bar Production package aluminium Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Zusatztank 600l Chip conveyor useable for fine aluminium chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Cabin roof; maschi
Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
Special equipment - Special clamping hydraulics, 2 clamping circuits - Preparation for dividing head EA510 with direct measuring system - Additional control bar for clamping hydraulics on the real machine side - Circulation control
Special equipment RMS-Sensor
Bu makineyi Facebook'ta paylaşın:

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

Sana kopyalamak mı?

Save input data


General
Highly productive compact machining centres; Control: Siemens 840D solutionline
Technical Data
Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Miscellaneous
Clamping System MAS 403 - 45°
Floor space/Weight
Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
Weight approx. 4100 Kg


Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
Table Table surface 840 x 420 mm
Maximum load (table centre) 300 Kg
Slot width 14 mm
Number of Slots 2
Clamping grid M 12, 100 x 100 mm
Tool clamping for BBT 30 (Big+) Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°
Tool D6252871 magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
Nano package Nano package Improved temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle. Without SW-Package Mdynamiks (C-H0020)
Production package aluminium band filter ICS 40bar Production package aluminium Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Zusatztank 600l Chip conveyor useable for fine aluminium chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Cabin roof; maschi
Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
Special equipment - Special clamping hydraulics, 2 clamping circuits - Preparation for dividing head EA510 with direct measuring system - Additional control bar for clamping hydraulics on the real machine side - Circulation control
Special equipment RMS-Sensor

seller offer No. resale 065347
Bu makineyi Facebook'ta paylaşın:
izleme listesine ekle
onaylı
Satıcı

satıcı

logo dealer

DMG MORI Used Machines GmbH

Bayan Kerstin Bauer
82538 Geretsried
Germany

RESALE üye beri 2019


verified user
[ bayi profili ]
  • makine listesi (146)
sorgu gönderme
sorgu gönderme

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

(böyle bir makine için tüm bayilere)

Sana kopyalamak mı?

(soruşturmanızın kopyası e-posta adresinize gönderilecektir)

Save input data

(Save input data for further inquiries)

daha DMG MORI MILLTAP 700 + similar DMG MORI-model

2014 DMG MORIMilltap 700 37500 EUR
2016 DMG MORIMilltap 700 39800 EUR
2020 DMG MORIMillTap 700
2013 DMG MORIMilltap 700
2016 DMG MORIMilltap 700 39800 EUR
2017 DMG MORINLX 2500 SY / 700
2018 DMG MORINLX 2500 SY 700
2019 DMG MORINLX 2500 SY/700
2023 DMG MORINLX2500/700
2018 DMG MORINLX 2500 SY / 700

fiyat: sold DMG MORI MILLTAP 700 + benzer DMG MORI-model

2016 DMG MORIMilltap 700 54900 EUR [Jul 2024]
2015 DMG MORIMilltap 700 90000 EUR [Mar 2017]